Defence Statutory Bodies & Commissions/Committees Closing in 6 days TDR #58320629

Tender For Smart Periodical Services To Md/Otm Accn At N Area Under Ge Chandigarh.

Issued by Statutory Bodies & Commissions/Committees · Chandigarh, Chandigarh
Tender Value
80 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
6 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Smart Periodical Services To Md/Otm Accn At N Area Under Ge Chandigarh.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 14-Nov-2026 Revision of BOQ BOQ 28-Nov-2026

BOQ

Name of Work:- SMART PERIODICAL SERVICES TO MD/OTM ACCN AT N AREA UNDER GE CHANDIGARH.
Sl. No. Item Description
1Taking down cement plaster or loose mtrls of any description on brick walls or concrete surfaces upto 15 mtr height including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish etc complete all as specified and directed
2M & L rendering 10mm thick rendering cement plaster in CM 1:6 over brick work or concrete surface finished even and smooth without using extra cement at any height and providing necessary scaffolding,safety precaution and other requisite arrangement complete all as specified and as directed.
3M & L for Rendering 10mm thick rendering in cement mortar (1:3) on concrete surfaces up to 15 meter height as in Chajja/mumty/Ceiling/External exposed beam at any positon including necessary scafolding work, finished fair & even without using extra cement complete all as specified and directed.
4M & L rendering 15mm thick rendering cement plaster in patches n. exc. 3.00sqm in CM 1:4 over brick work or concrete surface finished even and smooth without using extra cement up to 15 meter height and providing necessary scaffolding,safety precaution and other requisite arrangement complete all as specified and as directed.
5M & L rendering 15mm thick rendering cement plaster in exc. 3.00sqm CM 1:4 over brick work or concrete surface finished even and smooth without using extra cement up to 15 meter height and providing necessary scaffolding,safety precaution and other requisite arrangement complete all as specified and as directed.
6Supply only liquid water proofing compound ISI marked complete all as specified as specified and directed by Engr in Charge
7Repair to RCC sunshades, chajjas, balconies, coloumns, bands, beams and similar RCC work at any position up to 15 meter height by dismantling loose / disintegrated portion including necessary scafolding and safety arrangements and fixing of reinforcement (cut to length, bent to shape required, including cranking, bending spirally including mild steel wire (annealed) not less than 0.9 mm dia and chicken wire mesh of size 12.5mm x 1mm securing with clips/ chicken wire mesh wherever required and dubbing out with cement concrete 1:1.5:3, 15mm to 50mm thick, using 6 to 12mm graded stone aggregate to make up and finished the required shape including provision of necessary scaffolding and formwork up to four storey bldg if required and finished with 5mm thick rendering in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.
8Demolition of reinforced cement Concrete of any description and in any position not other wises pecifically provided up to 15 meter height complete all as specified.
9M&L reinforced cement concrete, type B-1 (1:2:4), using 20 mm graded stone aggregates as in chajja, drilling, weilding in old steel,fins and facias etc including form work up to 15 meter height complete all as specified.
10M&L for installation of rebar by using hilti hammer drill with carbide drill bit, Chemical dispensing gun for inserting RE-500V3 Chemical upto minimum depth of (10X dia of bar) as in chajah, beam, lintel, columns slab and parapet at any height Before inserting an anchor/bar, hole must be free from dust debris, water ice and oil grease etc complete all as per manufacture instructions.Note:-(i) Reinforcement will be measured and paid separtely.(ii) Rates are inclusive of form work shuttering and safely measures.(a) Dai of bar 12mm/10mm
11Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.
12Demolition & breaking of AC rain water 110/75mm dia set in cement mortar & removing from site completed all as specified & directed.
13S&F for 110mm dia PVC (SWR) pipe pressure rating, ISI Marked fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.
14Hacking out old broken glass (any thickness, size, quality or description)from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads
15S&F 4.00mm thick sheet glass pane tinted type ordinary quality fixed with, silicone,oil putty etc in each pane complete all as specified and directed.
16S&F for Figured glass, 4.00mm thick, pin head type and glazing with oil putty/silicone in squares not exceeding 0.5 sq. m in each pane, complete all as specified.
17Smart periodical
18M&L for removing existing loose/foreign material completely from internal masonry/plaster concrete surfaces manually or by mechanical means, including scrapping and ceaning the surface of all loose particles, dust and other foreign matter to expose sound subtrade for further surface preparation prior to painting work.
19M&L for providing and applying 2 coats of Crack Master Paste flexible, grainy texture acrylic crack filler paste material which can fill upto 5 mm cracks after widening cracks in V groove by using scrapper blade or angle cutter specifications and as directed by Engineer-in-Charge.
20Providing and applying a layer of cement based wall care putty two or more coat over new/old decorated plastered internal surface of wall/ceiling to achieve smooth, even finish surface suitable as required for uniform application and curing as per manufacturer’s instruction and as directed by Engineer-in-Charge
21Material and Labour for applying with 1 coat of interior primer over new/old wall/ceiling surface which provides exceptional whiteness and opacity and ensures strong adhesion of the top coat. Priming work to be carried out post all repair and preparatory works including cleaning the surface from loose particles, dust and other foreign materials using water by pressure washer all as directed by Engineer-in-Charge.
22Material and Labour for applying 2 coats of premium Interior acrylic emulsion paint over new/old decorated wall/ ceiling surface having excellent scrub and peel resistance, superior whiteness, excellent finish, resistance to fading of colours, advanced anti fungal and algal protection against all round weather and paint performance so as to obtain an acceptable finish usin roller finish all as per manufacturer's instruction and directed by Engineer-in-Charge
23M&L for providing and applying waterproof wall putty (Cement based putty) in two coats over prepared plastered surface (upto 15 mtr height) to achieve smooth even finished suitable for painting, including all tools, labour and scaffolding as required for uniform application and curing as per manufacturer's specifications.
24M&L Post all repair works, treating the surface to remove all loosely adhered particles followed by washing with plenty of water using wire brush or pressure washer to ensure through cleaning. Providing and applying with one coat of exterior primer (upto 15 mtr height) which provides exceptional whiteness and opacity and ensure strong adhesion of top coat specifications and as directed by Engineer-in-Charge.
25M&L for providing and applying with 2 coats of Premium acrylic exterior emulsion (upto 15 mtr height) having excellent scrub and peel resistance, (advanced anti algal) high resistance to growth of algae, (DPUR) superior resistance to dust and dirt accumulation and paint performance for 5 years so as to obtain an acceptable finish and ensuring coverage 5-60 ft/ltr with 30-35% dilution with water specifications and as directed by Engineer-in-Charge.
26Notes for item No. 17.00 to 24.00:(a) The work pertaining to periodical services shall be executed as per MoU between tenderer and one of the manufacturers mentioned in the contract as per MoU performa attached at Serial page No. 116 & 117. The MoU shall be duly signed by an officer not below the rank/ designation of Area Sales Manager of the paint company.(b) The Contractor shall upload with the documents under Cover I \\"Memoradum of Understanding\\" (MoU), failing which the bid shall not be opened and shall be liable to rejected.(c) The painting work shall be executed only by applicators authorised by the concerned paint manufacturer/ company. The Contractor shall submit, along with the MoU, a valid certificate from the paint company confirming that the proposed applicators are authorised to undertake the specified painting work. The certificate shall be duly signed by an officer not below the rank/ designation of Area Sales Manager of the paint company.
27Notes contd...(d) Within 30 days from date of isssue of work order No. 1, The entire quantity of material to be used in the painting work shall be calculated and brought to site in maximum three lots and handed over to Engineer-in-Charge. Payment of the paint materials shall only be made after verification of PVs and Challan from the company through Mail.(e) preparatory works i.e. scrapping of surfaces and coneected items except paint item shall be started as soon as the work order No.1 is issued. However, items connected with the incorporation of paint material brought at site shall only be allowed to be executed after the authenticity of the material is establisted by paint company.(f) Material will be kept in the custody of MES rep and will be issued to the authorised applicator as per requirement.(g) Packing material/ empty buckets will not be handed over to the contractor and will be destroyed after completion of work through a BOO to be convene by GE.
28Notes contd...(h) Preparation of plastered or unplastered surface or removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, facias etc. shall be done using mechanical sander with internal dust extraction system for clean environment.(j) The painting work shall be carried out using suitable heavy-duty electric airless paint spraying equipment compatible with the paint system/ materials specified by the paint manufacturer. The electric airless sprayer shall have the following capabilities: (i) Power supply: 220–240 V, single phase, or as suitable for the equipment. (ii) Motor capacity: approx 1000 W to 2200 W (approx. 0.8 HP to 1.5 HP). (iii) Maximum working pressure: 180–200 bar (approx 2600–3000 PSI) (iv) Flow rate: 1.50 to 10 Litres per minute as per site requirements. (v) The equipment shall be suitable for application of emulsion paints, primers, latex/ distemper and interior/ exterior enamel coatings, as applicable. (vi) High-pressure hose of adequate length, generally 15–30 metre or as required for proper execution of the work, shall be provided.
29Notes contd...(k) Work shall be carried out on buildings of height upto 15 metre (04 storey Bldgs). Rate quoted against items shall be deemed to include all necessary scaffolding, trestles, ladders, cradles and protective measures etc., wherever required. Contractor shall quote their rates accordingly keeping this aspect in mind.(l) Buildings will be handed over to the contractor in a phased manner and subsequently to the authorised applicator only after completion of civil work like plastering/ repairing as required.(m) Entire work will be divided into four stages as under and will be certified by a company technical rep whether the stages completed are as per manufacturer’s instruction and passed by Engr-in-Charge/ GE:-(i) State :1 Preliminary Inspection (ii) Stage 2: Preparation of surface(iii) Stage 3: Priming / Base Coat(iv) Stage 4: Final coat of painting
30Notes contd...(n) Stage passing register will be properly maintained duly signed by all Concerned.(o) The contractor shall submit manufacturer generated 05 years warranty card for each building during submission of RAR and Final Bill.(p) A guarantee amount @ 10% will be kept as reserve till completion of warranty period and will be released thereafter. (q) Any deterioration during the warranty period will be rectified by the manufacturer without any financial effect. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58320629
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 80 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Smart Periodical Services To Md/Otm Accn At N Area Under Ge Chandigarh.
Basic Detail
Tender No CWE/CHD-78/2026-27
Bidding Type Tender
Location
City Chandigarh
State Chandigarh
Key Dates
Publish Date 14 Nov 2026
Submission Date 28 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 80 Lakhs
Tender Fee 1000
EMD 1.45 Lakhs
Exemption Not Available
Document List
BOQ_893593.xls
e40da366-3190-46b7-8f9d-f51c2a90ce15.html
Tenderdocuments78.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 14, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 6 days
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_893593.xls

html

e40da366-3190-46b7-8f9d-f51c2a90ce15.html

pdf

Tenderdocuments78.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender