Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58320624

Tender For Special Repairs To Road At Various Location Of Jutogh Cantt Under Ge (I) Jutogh

Issued by Statutory Bodies & Commissions/Committees · Shimla, Himachal Pradesh
Tender Value
77.67 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
10 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Road At Various Location Of Jutogh Cantt Under Ge (I) Jutogh

BOQ

Name of Work:- SPECIAL REPAIRS TO ROAD AT VARIOUS LOCATION OF JUTOGH CANTT UNDER GE (I) JUTOGH
Sl. No. Item Description
1Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 30mm in depth, making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder @0.03 cum of premixed macadam), complete all as specified and directed.
2Scarifying or picking graveled, macadam or bituminous macadam surface in area n.exc 400 sqm/road cutting for drainage chamber, drainage pipe etc depth n.exc 50mm including removing the rubbish material not exc 500 mtr complete all as specified and directed.
3Preparation of bituminous surface and applying evenly a priming coat of cationic Bitumen Emulsion SS1 conforming to IS 8887 at a rate of application of @ 7.5 kg per 10sq meters using primer distributor which shall be self- propelled or towed bitumen pressure sprayer complete all as specified and directed.
4Premixed bituminous macadam, laid/ rolled & compacted to required gradient & camber (consolidated thickness 75 mm or less) with bitumen VG-10 @ 4% by weight of total mix, complete all as specified and directed.
5Preparation of bituminous surface and applying evenly a Tack coat conforming to clauses 503 of MORT&H specification for Road and Bridge Works (Fifth Revision), with cationic bituminous emulsion RS1 grade, confirming to IS 8887 (latest edition) @ 2.5 kg per 10sq meters using primer distributor which shall be self- propelled or towed bitumen pressure sprayer, complete all as specified and directed.
6Bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 6% binder content using paving bitumen of Grade VG-10 by weight of total mix, spread by means of mechanical paver, rolled and compacted to required camber and gradient with power roller 8 to 12 tonne to a uniform smooth surface complete all as specified and directed.
7Preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour white and yellow confirming to BS 3262-1989 with special applicator machine, all as per manufacturer's instructions, complete all as specified and directed.
8S&F in repair cat eye, dual (62 beads minimum), aluminium casted body, of size 100mm x 100mm x18.5mm, having ABS plastic strip containing 62 mini retro reflective glass beads of colour white/red/yellow on both sides (minimum 31 beads on each sides) and fixed complete with steel zinc plated nails/stud of dia 12mm and of length 120mm complete all as specified and directed.Note:- i) Fixing arrangement shall be as per manufacturer's instructions. ii) Designed to bear 25 Tonnes load and having impact strength of 253 KN.
9S&F in repair solar road stud 125x125x25mm. Solar Road stud made from aluminium alloy, solar powered by monocrystal solar panel with following specification: -i) Battery type - One high capacity Ni-Cd rechargeable battery ii) LED shall be 10 mm, 3 piece each side and total 6 piece for high brightness of different colours.iii) Back up time shall not less than 12 hours of continuous lighting at night. iv) Design to bear 25 Tones and having impact strength of 253 KN.Make: Green lite/ 3M / Shakti/ Dark eye or equivalent as approved.
10S&F in repair road convex mirror of dia 60cm, fitted in orange colour cap body of ABS with glass mirror made up of unbreakable polycarbonate including MS Pipe vertical post pipe of 65mm dia, 2.00m height Gde-30-G fixed with nut and bolts and clamp system with stainless steel bracket, including necessary excavation of post holes and embedded in cement concrete 1:2:4, type B-1, using 20 mm graded crushed stone aggregate, complete all as specified and directed.
11Demolition of cement concrete in floors and pavings n. exc. 15 cm thickness below or above ground level, complete all as specified and directed
12M&L for 100 mm thick plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed
13M&L for PCC 1:2:4, type B-1, using 20mm graded mechanically crushed stone aggregate as in coping, kerbs, benching and bed block etc. including necessary form work, complete all as specified and directed.
14Machine pressed precast concrete interlocking paver block any shape and size conforming to is 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment finished with coloured rubber finish on top finished over sand dust cushion of 30 mm thick, complete all as specified and directed.
15S&F speed bumps made up of polyethylene plastic of size 495x420x70 mm each (black & yellow colour pattern interlocked alternately) UV stabilized, studded with reflectors on both sides, interlocking type including drilling 04 nos holes to road surface and fixing lag bolts with anchor and washers, complete all as s specified and directed.Make : Dark Eye or equivalent as approved.Note: i) Fixing arrangement shall be as per manufacturer instructions.ii) Designed to bear 25 tones load and having impact strength of 253 KN.
16Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900mm diameter with support length of 3750mm and made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20cm c/c to back support frame of MS angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. MS angles of size 35x35x5mm to a vertical post made up to MS Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angles flats, providing & fixing MS message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc., complete all as specified and directed.
17S&F KTI04015002SINDUS-speed display 230V operated indus ADOR INDUS The vehicle activated speed sign shall be highly powerful, economic, traffic calming device. The device shall be ideal for all types of roads, extremely efficient, pole mounted radar speed display vividly readable from 300mtr away. It shall be ultra-bright tricolor LED speed displays along with the simultaneous display of programmable messages 16” full color speed display for better visibility customized messages along with speed display compatible with AC, solar & battery powered traffic data and analysis with software compatible to mount on pole, gantry or trailer/ dolly SPEED DIGIT height: 16”, Display: 7 segment “YOUR SPEED” legend 1.37inch, spell “YOUR SPEED” customizable message LED’s Ultra-bright, 3 row thick, tri-color: amber, Green, Red LEGILITY 300+m pole fixing complete all as specified and directed by Engineer-in-Charge.Notes: 1. Installation will be done by well trained engineer of OEM at site. 2. Basic training and troubleshooting will be provided by the OEM engineer. 3. After satisfied installation, installation report will be provided by the company engineer.4. The warranty certificate for 12 Months shall be provided by the OEM. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58320624
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 77.67 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repairs To Road At Various Location Of Jutogh Cantt Under Ge (I) Jutogh
Basic Detail
Tender No GE(I)/JUT-101 OF 2026-27
Bidding Type Tender
Location
City Shimla
State Himachal Pradesh
Key Dates
Publish Date 31 Oct 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 77.67 Lakhs
Tender Fee 1000
EMD 1.41 Lakhs
Exemption Available
Document List
bc2008a7-2e41-4892-975c-789cd2e703b4.html
BOQ_893661.xls
ResidualworkloadFormat.pdf
td.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

bc2008a7-2e41-4892-975c-789cd2e703b4.html

xls

BOQ_893661.xls

pdf

ResidualworkloadFormat.pdf

pdf

td.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender