Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #58320612

Tender For Repair/ Maintenance Of Summer Appliances Systems And Allied Works In Labs Of Zone ‘A & Otm At Kwc & Jcb Area And Internal Electrification And Other Connected Works At Various Labs Of Zone A Area Under Ge (I) R&D Delhi

Issued by Statutory Bodies & Commissions/Committees · Delhi, Delhi
Tender Value
46.50 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
93000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair/ Maintenance Of Summer Appliances Systems And Allied Works In Labs Of Zone ‘A & Otm At Kwc & Jcb Area And Internal Electrification And Other Connected Works At Various Labs Of Zone A Area Under Ge (I) R&D Delhi

BOQ

Name of Work:- REPAIR/ MAINT OF SUMMER APPLIANCES SYSTEMS AND ALLIED WORKS IN LABS OF ZONE ‘A & OTM AT KWC & JCB AREA AND INTERNAL ELECTRIFICATION AND OTHER CONNECTED WORKS AT VARIOUS LABS OF ZONE A AREA UNDER GE (I) R&D DELHI
Sl. No. Item Description
1Taking down of Old unserviceable point wiring any type for light, fan, power etc including unserviceable switch, socket, regulator light fitting and ceiling rose etc of any make complete including making good disturbed surfaces of walls, floors roof etc complete all as specified and directed.
2Taking down of Ceiling Fan/ Exhaust Fan carefully and deposit in safe coustudy and refixing the same after copper rewinding, and Painting with synthetic enamel white paint by spraying, greasing, minor repairing and bearing change on the completion of the work complete all as specified and directed.
3M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and sheathed in PVC concealed connduit including cutting chasing for conduits with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and directed.
4All description as per srl item No 3.00 here-in-before but using cable size 1.5 Sqmm for one 3 pin socket outlet, 5A independent with terminal boxes, Moduler fittings including acessories as moduler surface cover plate with frame, metal flush box, complete all as specified and directed.
5All description as per srl item No 3.00 here-in-before but using cable size 1.5 Sqmm for for one light point controlled by 2 two way swithes with terminal boxes, Moduler fittings including acessories as moduler surface cover plate with frame, metal flush box complete all as specified and directed.
6All description as per srl item No 3.00 here-in-before but using cable size 1.5 Sqmm for one 3 pin socket outlet, 5A on the same board with other switches complete all as specified and directed.
7All as per srl item No 3.00 here-in-before but using cable size 2.5 Sqmm for one 3 pin socket outlet, 15A terminal boxes for Modular switches including acessories as moduler surface cover plate with frame, metal flush box with 2.5 sqmm earth wire complete all as specified and directed.
8M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and sheathed in PVC casing and capping double lock including fixures and terminal boxes with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and directed.
9All description as per srl item No 8.00 here-in-before but using cable size 1.5 Sqmm for one 3 pin socket outlet, 5A independent with terminal boxes, Moduler fittings including acessories as moduler surface cover plate with frame, metal flush box, complete all as specified and directed.
10All as per srl item No 8.00 here- in- before but using cable size 2.5 Sqmm for one 3 pin socket outlet, 15A terminal boxes for Modular switches including acessories as moduler surface cover plate with frame, metal flush box with 2.5 sqmm earth wire complete all as specified and directed.
11M&L for additional Point wiring ser item No 8.00 with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and sheathed in existing PVC casing and capping counduit including fixures and terminal boxes with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and directed.
12All description as per srl item No 11.00 here-in-before but using cable size 1.5 Sqmm for one 3 pin socket outlet, 15A independent with terminal boxes, Moduler fittings including acessories as moduler surface cover plate with frame, metal flush box,complete all as specified and directed.
13All as per srl item No 8.00 here- in- before but using cable size 4 Sqmm for one 3 pin socket outlet, 15A terminal boxes for Modular switches including acessories as moduler surface cover plate with frame, metal flush box with 2.5 sqmm earth wire complete all as specified and directed.
14S&F in replacement of Plug Top 16 A complete all as specified and directed.
15S&F sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed.
16S&F modular switch 6A single pole one way one module complete all as specified and direcetd.
17S&F modular switch 16A single pole one way one module complete all as specified and directed.
18S&F modular socket outlet 6A-2/3Pin 2 Module complete all as specified and direcetd.
19S&F modular socket outlet 6/16A-2/3 Pin 2 Module complete all as specified and directed.
20S&F Fan step regulator 120W - 2 module complete all as specified and directed.
21S&F Fan step regulator 1 module all as specified and directed.
22M&L for Modular Bell push 6A 1 Module complete all as specified and directed.
23M&L in replacement of Bell Ding Dong AC 230V single Pole
24S&F in replacement of switch piano type flush type single pole one way 6A
25S&F in replacement of socket outlet 2 in 1 3Pin 6A
26S&F in replacement of switch piano type flush type single pole one way 16A
27S&F in replacement of socket outlet 2 in 1 3 Pin 6A and 16 A
28S&F in replacement of exhaust fan blade PVC body siutable for 250mm/300mm diameter having 3/4 Blade including connection and fixing on wall with nuts bolts washers etc complete all as specified and directed.
29M&L for in renewal of sub main wiring complete using 4 run of 10 sqmm and two run of 10 sqmm PVC insulated unsheathed FRLSH multistranded copper conductor ISI marked 1100V grade in existing concealed PVC conduit fixed in wall/floor, passing through wall/ceiling complete all as specified and directed by Engineer-in-Charge.
30M&L for in renewal of sub main wiring complete using 4 run of 6 sqmm and two run of 6 sqmm PVC insulated unsheathed FRLSH multistranded copper conductor ISI marked 1100V grade in existing concealed PVC conduit fixed in wall/floor,passing through wall/ceiling complete all as specified and directed by Engineer-in-Charge.
31M&L for in renewal of sub main wiring 2x4.0 sqmm and 1x4 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100V grade in PVC concealed conduit or fixed in wall/floor,passing through wall/ceiling complete all as specified and directed.
32M&L for in renewal of sub main wiring 2x6.0 sqmm and 1x6 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100V grade in existing PVC concealed conduit or fixed in wall/floor, passing through wall/ceiling complete all as specified and directed.
33M&L for in renewal of sub main wiring 2x10 sqmm and 1x10 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100V grade in existing PVC conduit fixed in wall/floor,passing through wall/ceiling complete all as specified and directed.
34S&F ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.
35S&F lA holder angle /batten type PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
36S&F in replacement energy efficient LED light fitting surface mounted 2' long, 10 watt, 240V, 50 Hz made out of extrunded aluminium housing with acrylic diffuser, LM 80 certified LED, costant current out put of electronic driver of operating voltage 140V to 270V and temperature - 10 digree centigrade to 50 digree centigrade with ingress protection IP 20 duly pre wired with insulated copper wire, PF>0.95 with efficiency 120 lumins/watt and TDH less than 10%, CRI > 90 digree , CCT 6500 K in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose complete all as specified and directed.
37S&F in replacement LED 9 watt circular shaped concealed light with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency complete including connection with 1.5 Sqmm 3 core flexible copper cable complete all as specified and directed.
38S&F in replacement LED 15 watt square LED panel with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency complete including connection with 1.5 Sqmm 3 core flexible copper cable complete all as specified and directed.
39S&F in replacement energy efficient LED light fitting surface mounted 4' long, 20 watt, 240 V, 50 hz made out of extrunded aluminium housing with acrylic diffuser, LM 80 certified LED, costant current out put of electronic driver of operating voltage 140v to 270v and temperature - 10 digree centigrade to 50 digree centigrade with ingress protection IP 20 duly pre wired with insulated copper wire, PF>0.95 with efficiency 120 lumins/watt and TDH less than 10%, CRI > 90 digree , CCT 6500 K in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose complete all as specified and directed.
40S&F in replecement energy efficient LED light fitting, slim LED panel, surface mounting 2ft x 2ft made out of power coated CRCA sheet with acrylic diffuser, constant current output of electronic driver operating voltage range of 150 to 270 V AC, PF>0.95, high powder LEDs having efficiency of 100-120 lumins/watts, junction temparature less than 85 digree C and TH less than 12 % and CCT 6500K,, CRT>90 suitable for 36 watt LED, LM 80 certified LM, pri wired in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose /connector etc and testing complete all as specified and directed.
41S&F in replecement energy efficient LED light fitting, slim LED panel, recessed mounting 2ft x 2ft made out of power coated CRCA sheet with acrylic diffuser, constant current output of electronic driver operating voltage range of 150 to 270 V AC, PF>0.95, high powder LEDs having efficiency of 100-120 lumins/watts, junction temparature less than 85 digree C and TH less than 12 % and CCT 6500K,, CRT>90 suitable for 36 watt LED, LM 80 certified LM, pre wired in and including connecting up with twin core copper flexible cable of suitable size upto ceiling rose /connector etc and testing complete all as specified and directed.
42S&F in replacement of LED bulb 7 Watt B22 Base (3000 K) complete all as specified and directed.
43S&F in replacement of LED bulb 9 Watt B22 Base (6500 K) complete all as specified and directed.
44S&F in replacement of extension cord 4x1 5A sockets with 4m power cable including 5A Plug Top complete.
45S&F in replacement of capacitor 2.5 Mfd including connection complete all as specified and directed.
46M&L for MCB TPN distribution board suitable TPN 8 Way double door 415 V complete all as specified and directed by Engineer-in-Charge
47M&L for MCB TPN distribution board suitable TPN 4 Way double door 415 V complete all as specified and directed by Engineer-in-Charge
48S&F sheet metal enclosure for DBs 12 Way double door having 200 A rated bus bar 240 V AC complete all as specified and directed
49S&F sheet metal enclosure for DBs 8 Way double door having 200 A rated bus bar 240 V AC complete all as specified and directed
50S&F 63 A, 240V 10KA 'C' curve miniature circuit breaker (MCB) SPN of double pole in the DB complete with connection testing and commissioning complete all as specified and directed.
51S&F 32 A, 240V 10KA 'C' curve miniature circuit breaker (MCB) SPN of double pole in the DB complete with connection testing and commissioning complete all as specified and directed.
52S&F PVC conduit 25mm diameter including fittings/accessories concealed in wall including cutting chasing and making good to disturb surfaces complete all as specified and directed
53S&F in replacement of Plug Top 6A complete all as specified and directed.
54S&F in replacement of heating element 1.5KW for 25 Ltr hot water heater including connection complete all as specified and directed
55S&F in replacement of inlet/outlet assembly to matching the existing 25/50 Ltr capacity geyser inclding fixing and testing complete all as specified and directed
56S&F in repalcement of thermostat switch for 25/50 Ltr geyser including LED indicator lA complete all as specified and directed
57S&F in replacement of LED tube rod 20 watt double side connection including side holder complete all as specified and directed
58S&F in replacenebt of PVC connection pipe 600 mm long with brass Nut with rubber washer suitable hot/cold water heater complete all as specified and directed
59S&F in replacement of modular cover plate with frame 1 module complete all as specified and directed
60S&F in replacement of modular cover plate with frame 2 module complete all as specified and directed.
61S&F in replacement of modular cover plate with frame 3 module complete all as specified and directed.
62S&F in replacement of modular cover plate with frame 4 module complete all as specified and directed.
63S&F in replacement of modular cover plate with frame 6 module complete all as specified and directed.
64S&F in replacement of modular cover plate with frame 8 module complete all as specified and directed.
65S&F in replacement of PVC Sheathed copper cable 1.5 Sqmm 3 core complete all as specified and directed.
66S&F in replacement of PVC Sheathed copper cable 2.5 Sqmm 3 core complete all as specified and directed.
67S&F in replacement of MCB distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 8 way. 415V with bus bar rating 200 A, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCCB, including grouting in the wall, cutting and chasing etc complete all as specified and directed.
68M&L for earthing complete with copper earth plate electrode 60cmx60cmx3.15mm thick burried in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15cm of earth plate and up to 15cm above the same. Copper plate connected with copper strip of 20mm x 3mm as earthing lead by means of Copper nuts, bolts and washers of galvanished iron or steel all as shown in electrical plate No 3. strip laid in 40mm diameter light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5m from earth electrode will be included in the rates quoted by the contractor) with following:-(a) Copper strip of size 20mm x 3mm. (b) Watering pipe GI light grade 20mm diameter from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits)(c) PCC earth pit 30xcm 30xcm 30cm constructed in PCC (1:2:4) type B1 exposed surfaces smoothly finished with 15mm thick CM (1:6) plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm diameter suitable for carrying of pit cover.(d) Angle iron frame made of 40mm x 40mm x 4mm angle iron for 30 x 30cm PCC pit for holding the pit cover.(e ) Apply two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer on exposed steel surfaces and two coat of hot tar on embedded portion of steel surfaces.
69M&L Galvanised iron strip 25mm x 4mm buried in ground including necessay excavation and earth work in soft/loose soil and removal of excavated naterial not exceeding 50m and depositing where complete all as specified and directed
70S&F GI Wire 4mm diameter for connecting earthing complete all as specified and directed.
71S&F of hylam sheet of size 4\\"x4\\" including screw, washer etc complete all as specified and directed.
72S&F of hylam sheet of size 6\\"x6\\" including screw, washer etc complete all as specified and directed.
73S&F of hylam sheet of size 8\\"x8\\" including screw, washer etc complete all as specified and directed.
74Supply, laying, testing and commissionnig of LT cables 1100V grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 16 Sqmm 4 core complete all as specified and directed.
75Supply, laying, testing and commissionnig of LT cables 1100V grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 25 Sqmm 4 core complete all as specified and directed.
76Supply, laying, testing and commissionnig of LT cables 1100V grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 50 Sqmm 3.5 core complete all as specified and directed.
77S&F DLP U-PVC trunking system size 100mm x 50mm in and including such as bend, fittings etc. and flexible cover complete all as specified and directed.
78Taking down unserviceable ceiling Fans of size 1200/1400mm of any make dismantling cutting and removing of old burnt windings and rewinding with super enamelled copper winding wire of required size including allied insulation material, varnishm sleeves, etc greasing, oiling, re-assembling testing and refixing in the same position, complete all as specefied and directed by the Engineer- in-charge.
79All as per description of serial item No 78.00 above but wall mounted fans of and any make.
80All as per description of serial item No 78.00 above but pedastal fans of size 400mm/450mm and any make.
81All as per description of serial item No 78.00 above but exhaust fans of size 225mm to 300mm and any make.
82All as per description of serial item No 78.00 above but exhaust fans of size 350mm to 450mm and any make.
83S&F in replacement capacitor of 3.15 MFD including fixing complete and including necessary items such as sleeves etc. complete all as specified and directed.
84S&F in replacement unserviceable Capacitor 2.5 MFD complete all as specified and directed.
85S&F in replacement bush/ bearing of suitable size in ceiling fans of size 1200mm/1400mm complete all as specified and directed.
86S&F in replacement bush/ bearing of suitable size in wall fans of size 400mm/450 mm complete all as specified and directed.
87S&F in replacement bush/ bearing of suitable size in exhaust fans of size size 225mm to 300mm complete all as specified and directed.
88S&F in replacement bush/ bearing of suitable size in exhaust fans of size size 350mm to 450mm complete all as specified and directed.
89S&F in replacement Metallic clamp for hanging of ceiling fans of size 1200mm/1400mm with bolts & nuts, split pin etc., complete all as specified and directed.
90S&F in replacement Stator of ceiling fans of size 1200mm/1400mm complete all as specified and directed.
91S&F in replacement Rotor of ceiling fans of 1200mm/1400mm size complete all as specified and directed.
92S&Fin replacement Blade set for ceiling fans of size 1200mm/1400mm with bolts etc. complete all as specified and directed.
93S&F in replacement Blade set for wall mounted fans of size 400mm/450mm with bolts etc. complete all as specified and directed.
94S&F in replacement Metallic/PVC Blade set for Exhaust fans of size 225mm to 300mm with bolts etc. complete all as specified and directed.
95S&F in replacement Metallic/PVC Blade set for Exhaust fans of size 350mm to 450mm with bolts etc. complete all as specified and directed.
96S&F in replacement MS down rod of length 450mm/600mm for ceiling fans of size 1200mm/1400mm and make complete all as specified and directed.
97S&F in replacement Metallic louvers for Exhaust fans of size 225mm to 300mm with bolts etc. complete all as specified and directed.
98S&F in replacement Metallic louvers for Exhaust fans of size 350mm to 450mm with bolts etc. complete all as specified and directed.
99S&F in replacement PVC canopy for ceiling fan (upper and lower) of size 1200/1400mm complete all as specified and directed.
100M&L for Servicing of 3 phase precision air conditioner of capacity 7 TR (bottom discharge type) including oiling/greasing the blower motor, cleaning the evaporator (tower type) condenser coils/cooling coil externally to remove the dust, replacement of defective thimbles etc by the OEM refrigeration mechanic complete all as specified and directed by Engineer-in-Charge. Note:- (i) Any unserviceable items need to be replaced/gas charging etc shall be paid seperately under respective items.
101M&L for Servicing of 3 phase package air conditioner of capacity 7.5 TR (bottom discharge type) including oiling/greasing the blower motor, cleaning the evaporator (tower type) condenser coils/cooling coil externally to remove the dust, replacement of defective thimbles etc by the experienced refrigeration mechanic complete all as specified and directed by Engineer-in-Charge. Note:- (i) Any unserviceable items need to be replaced/gas charging etc shall be paid seperately under respective items.
102M&L for repair vacuume filter of package type AC of capacity 7.5 TR including taking out unserviceable complete all as specifed and directed.
103M&L for repair connector 40A 3 phase sutable for package type Unit of 7.5 TR capacity including taking out unserviceable complete all as specified and directed.
104Repair of PCB for package type unit of 7.5 Ton capacity including taking out unserviceable PCB complete all as specified and directed.
105Repair of Fan Motor of package type unit of 7.5 TR Capacity of approved Make and required Size to suit existing AC including taking out the unserviceable Fan Motor from the AC, complete all as specified and directed.
106Supply, assembling and erection of PGI sheet 22 gauge with TDF flange rectangular/square duct made out of 'L'shaped hollow profile, duly factory boxed including all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc including taking down old rusted duct complete all as specified and directed.
107M&L in repair Remote with full kit of package type unit of 7.5 TR capacity (As per sample or as per site requirement) complete all as specified and directed.
108Checking, servicing, preventive maintenance, cleaning (Dry and Wet), inspection and testing of window Air conditioner of capacity 1.5/2 Ton of invertor type or any modal and make at site in Multi story buildings as per OEM guideline for safety and performance by means chekcing operation performance parameters, cleaning of blower, condenser fan, cleaning or replacing the air filters, cleaning the condeser and evaporator coils, checkiing the refrigerant level and testing for leakage and topping off refrigerant level, inspecting and tightening electrical connections, lubricating moving parts, checking thermostate calibration, checking the PCB controler cards and capacitor Remote control handset in and including anti corrosive coating blue/gold fin on condenser and evaorator coils complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information
109Checking, servicing, preventive maintenance, cleaning (Dry and Wet), inspection and testing of window Air conditioner of capacity 1.5/2 Ton of invertor type or any modal and make at site in Multi story buildings as per OEM guideline for safety and performance by means chekcing operation performance parameters, cleaning of blower, condenser fan, cleaning or replacing the air filters, cleaning the condeser and evaporator coils, checkiing the refrigerant level and testing for leakage and topping off refrigerant level, inspecting and tightening electrical connections, lubricating moving parts, checking thermostate calibration, checking the PCB controler cards and capacitor Remote control handset in and including anti corrosive coating blue/gold fin on condenser and evaorator coils complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58320612
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 46.50 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair/ Maintenance Of Summer Appliances Systems And Allied Works In Labs Of Zone ‘A & Otm At Kwc & Jcb Area And Internal Electrification And Other Connected Works At Various Labs Of Zone A Area Under Ge (I) R&D Delhi
Basic Detail
Tender No GE/RND/T-28/DLI/2026-2027
Bidding Type Tender
Location
City Delhi
State Delhi
Key Dates
Publish Date 31 Oct 2026
Submission Date 21 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 46.50 Lakhs
Tender Fee 500
EMD 93000
Exemption Available
Document List
778fee94-4e62-450a-ac13-ac3e3c3790f0.html
BOQ_893641.xls
TDR.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

778fee94-4e62-450a-ac13-ac3e3c3790f0.html

xls

BOQ_893641.xls

pdf

TDR.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender