Tender For Repairs / Replacement / Renewal Of False Ceiling, Roof Sheets, Eaves/Facia Etc And Allied Wks At Certain Otm Accns At Mil Stn Kanchrapara Under Ge Barrackpore
Tender Value
35 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
18 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs / Replacement / Renewal Of False Ceiling, Roof Sheets, Eaves/Facia Etc And Allied Wks At Certain Otm Accns At Mil Stn Kanchrapara Under Ge Barrackpore
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed. |
| 2 | M&L Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed. |
| 3 | M&L Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and as directed. Note: To be executed for provision of ridges and hips.and eave gutter/ box gutter |
| 4 | S&F UV resistant Embossed Polycarbonate Sheet, 6mm thick, 1.20 gm/cm³ density, tensile strength 55 Mpa, fixed to iron framework with SS screws complete including silicon adhesive jointing at lap/joints complete all as specified and as directed. |
| 5 | S&F 1.25mm thick and 150mm dia mild steel sheet eaves gutter half round with rounded edges, galvanized class 3, coloured preprinted matching the colour to extra roof sheet with necessary brackets complete all as specified and as directed. |
| 6 | M&L for mild steel flat iron in bands, straps, supports or stays for pintle hinge, hand made sliding bolts, hold fast etc conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 8 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) quality A complete all as specified and as directed. |
| 9 | S&F rolled mild steel plates (plain or chequered) square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment GDE Fe410-W (GdeE- 250) quality 'A' complete all as specified and as directed. |
| 10 | M & L for preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and as directed. |
| 11 | S&F 4mm thick High Pressure steam Crude Non Asbestos Fiber Cement plain Board (E-Board Classic) of size 595mm x 595 mm with and including supply and fix of powder coated anodised aluminium snap grid frame work for false ceiling, Size of grid 605 x 605mm using Main/Cross Bulbed tees - Tapered head (Web: 25mm Flange: 38mm) of weight not less than 0.249 kg/m and Equal angle of size 25mm of weight not less than 0.196 kg/m fixing with screws and hangers 4 mm dia GI (n.exc 1200 mm in length apart) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long including dismantling of old ceiling of any description complete all as specified and as directed. |
| 12 | M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete including hangers 4 mm dia G I (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long and including supply and fixed or laid interior decorative cavity/ hollow PVC louver /flute ceiling panels/planks of interlocking types thickness 10-12mm with colour texture/shade as approved and necessary trims here required fixed with hidden screws to GI frame work including dismantling of old ceiling board of any description complete all as specified and as directed. |
| 13 | S&F 25mm thick insulated PVC Wall Lining consisting of PVC Insulated Panel with wood grain printed PVC sheet used instead of plain colour sheet having expanded polystyrene (EPS)stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing including dismantling of old ceiling board of any description complete all as specified and as directed. |
| 14 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 15 | M&L for 25 mm boarding 2nd class hard wood clean sawn fixed with Screws in any situation (except flooring and skirting) with butt joints including dismantling of old or decayed boarding complete all as specified and as directed. |
| 16 | M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed. |
| 17 | Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 18 | M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 19 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 20 | M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 21 | M&L for 15mm thick rendering in cement mortar (1:4), to other than fair faces of brick or concrete wall surfaces, mixed with highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder @ 1% of cement content, finished even and smooth without using extra cement complete all as specified and as directed. Note : Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item. |
| 22 | M&L for rendering 5 mm thick in cement mortar (1:3) as in ceiling surface, mixed with highly stretchable, durable and hydrophobic, Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder @ 1% of cement content, finished even and smooth without using extra cement complete all as specified and as directed. Note : Elastomeric Hydrophobic Powder/admixture (EHP) shall be measured and paid as Supply only in respective item. |
| 23 | Supply only Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder for cement plaster and concrete complete all as specified and directed. |
| 24 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 25 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint complete all as specified and as directed. |
| 26 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and as directed. |
| 27 | M & L for applying 3mm (Average) thick wall care putty on newly plastered or old prepared surfaces of wall complete all as specified and as directed. |
| 28 | Cutting/Demolition/dismantling of loose/damage/disintegrated concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof/ceiling, louvers, parapet, column, beam, lintel, etc using manual chipping tools/breakers without disturbing stability of structure with necessary scaffolding where required including cutting reinforcement to facilitate demolition/dismantling complete and dispose off debris outside MoD land complete all as specified and as directed. |
| 29 | M&L for providing and placing in position free flow non shrink cementitious micro Nano-concrete of Grade M-50 for effected RCC beam, column, chajjas, fins/drops, staircase, etc. complete using necessary formwork (where applicable) after due treatment/coating of existing concrete with High Penetration, high adhesion shorter chain Nano epoxy bond adhesive and reinforcement surfaces with High Penetration, high adhesion shorter chain with high anti corrosive Nano Epoxy Zinc rich primer. Note : (i) Nano micro-concrete shall have a min 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa including min tensile strength of 5N/mm² at 28 days and min flextural strength of 5N/mm² at 28 days. (ii) Nano micro-concrete shall be prepared in proportion of (1Part) Nano cement : (0.5 Part) Sand (packed graded sand of same make) : (1 Part) Aggregate (packed graded sand of same make) : (0.1 Part) Nano shorter chain water based epoxy base : (0.1 Part) Nano shorter chain water based epoxy Hardener : (0.02 Part) Nano Admixture : (0.3 to 0.4 Part) Water : (0.01 Part) EHP Powder.(iii) Necessary formwork shall be removed after 48 hrs and curing shall be done as per manufacturer instructions.(iv) Necessary formwork, TMT bars (where required), treatment with High Penetration, high adhesion shorter chain Nano epoxy bond adhesive and High Penetration, high adhesion shorter chain with high anti corrosive Nano Epoxy Zinc rich primer shall be measured and paid extra under respective items. items. |
| 30 | M & L for mild steel TMT bars 8 mm dia cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed. |
| 31 | M&L for careful removal of the old ceiling without damaging primary slab reinforcement including hacking, clearing debris, and cleaning concrete soffit ready for new hanger anchoring complete all as specified and as directed. |
| 32 | M&L for heavy-duty MS grid framing (primary running channels, perimeter angles) suspended via 12.5mm steel dash fasteners into the RCC slab and treated with 2 coats of zinc-chromate anti-corrosive primer complete all as specified and as directed. |
| 33 | S&F premium 10mm/12mm Toughened & Laminated Safety Glass panels with approved texture (Fluted/Reeded/Diamond-Patterned & Laminated Safety Glass) Edges flat-machine polished, seamlessly seated into grid frames via rubber EPDM safety gaskets complete all as specified and as directed. |
| 34 | S&F Anodised aluminium snap beading for fixing of perimeter hardware (12.5mm MR Board), fixed with countersunk SS 304 screws, structural joint sealants, and custom perimeter timber decorative framing mouldings complete all as specified and as directed. |
| 35 | M&L for Erecting dual-layer perimeter gypsum board steps/cove steps (12.5mm MR board) designed to shield and disperse automated, dimmable LED strip modules smoothly across the texturized layout complete all as specified and as directed. |
| 36 | S & F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with clamps including dismantling of old drain pipe of any description complete all as specified and as directed. |
| 37 | S & F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed. |
| 38 | S&F 110mm dia PVC (SWR) junction double, (double T) equal or unequal complete all as specifiec and as directed. |
| 39 | M&L Replacing loose/rusted roofing screws with new hex-head self-drilling screws embedded with EPDM washers, followed by encapsulating all (~400) screw heads with a UV-stable elastomeric PU sealant cap complete all as specified and as directed. |
| 40 | Fixing and sealing only peripheral wall flashes and ridge caps by deploying high-performance polyurethane joint sealants to counter thermal movement complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender