Tender For Special Repair To Building No P-94 (12 Or Qtr) At Old Domlur Md Accommodation Under Age B/R-I Of Ge (Central) Bangalore.
Tender Value
89.30 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
6 days left
EMD
1.58 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No P-94 (12 Or Qtr) At Old Domlur Md Accommodation Under Age B/R-I Of Ge (Central) Bangalore.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Cement Plaster of any description on Brick Walls, Stone Walls, Concrete Surfaces including racking out Joints, hacking for Key, scrubbing down with Water, etc. complete including removal of debris outside MD land complete all as specified & as directed. |
| 2 | M&L for Rendering 5mm thick cement mortar (1:3) on fair faces of concrete surface of ceiling / Chajjas finished even and smooth without using extra cement complete all as specified & as directed. |
| 3 | M&L for Rendering 15 mm thick cement mortar (1:6) over stone masonry surface of walls finished even and smooth without using extra cement complete all as specified & as directed. |
| 4 | M&L for Rendering 15 mm thick cement mortar (1:4) over stone masonry surface of walls finished even and smooth without using extra cement complete all as specified & as directed. |
| 5 | M&L for Cutting / chipping the spalling concrete surfaces of columns, beams, facias, slabs, Chajjas & cartilevers etc., and trimming cleaning the surfaces of any thickness and applying epoxy treatment for bonding old demolished concrete surfaces including application of one coat of notozinc primer to the exposed reinforcement and plastering 20mm thick CM (1:4) finishied even and smooth without using extra cement to level the surface etc., complete including necessary scaffolding as required at site complete all as specified and as directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including removal of debris outside MD land complete all as specified and as directed. |
| 7 | Demolition of cement concrete (unreinforced) in ground floor and paving etc n.exc 15cm thick above or below ground level including terrazzo finish wherever existing complete all as specified and as directed. |
| 8 | Demolition of stone slabs of any description or thickness in floors laid bedded and pointed in any mortar etc., including removal of debris outside MD land complete all as specified and as directed. |
| 9 | M&L for 25mm thick plain cement concrete (1:2:4) type B-0 using 12.50mm graded Crushed stone aggregate as in sub base to floor tiles complete all as specified and as directed. |
| 10 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 11 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc., set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over & including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and as directed. |
| 12 | M&L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over & including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 13 | M & L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10 mm thick backing coat in CM (1:4) all as specified and as directed. |
| 14 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and as directed. |
| 15 | M&L for 18 to 20mm thick Sadarhalli stone slab in flooring, steps, jambs, pillars, window cills, steps/stairs, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab over & including 15 mm thick screed bed in CM (1:4) and Rounding to exposed edges complete all as specified and as directed. |
| 16 | M&L for 18 to 20mm thick Sadarhalli stone slab for skirting, riser, dado and like jointing in cm (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab over & including 10 mm thick backing coat in CM (1:3) complete all as specified and as directed. |
| 17 | M&L for 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15 mm thick screed bed in CM (1:6) and Rounding to exposed edges complete all as specified and as directed. |
| 18 | M&L for Anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. |
| 19 | S&F Mild Steel ordinary rat tail rod pattern spring 300mm long including roller and roller plate complete all as specified & as directed. |
| 20 | M&L for 75mm thick plain Cement Concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in Plinth protection finished the concrete surface fair and even without using extra cement including filling sealing compound grade A in grooves complete all as specified & as directed. |
| 21 | Demolition of brick work or PCC solid block or stone/boulder masonry built in cement mortar complete all as specified & as directed. |
| 22 | M&L for Precast cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in solid block masonry exc 10cm width & setting in CM (1:6) complete all as specified & as directed. |
| 23 | M&L for Precast cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in solid block masonry not exc 10cm width & setting in CM (1:4) complete all as specified & as directed. |
| 24 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) area not exc 1.50 Sqm each including making good the disturbed surfaces complete all as specified & as directed. |
| 25 | Taking down chowkats or frames with shutters (with out taking off shutters from the frames) area exc 1.5 Sqm but n. exc 4 Sqm each including making good the disturbed surfaces complete all as specified & as directed. |
| 26 | M & L for Pressed steel frames of profile size 125 x 60 mm for doors using 1.25mm thick MS sheets with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and as directed. |
| 27 | M & L for pressed steel frames of profile size 105 x 60 mm for doors using 1.25mm thick M S sheets with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified & as directed. |
| 28 | M & L for PCC (1:3:6) type B-0 using 12.50mm graded Crushed stone aggregate as in filling of chowkats or similar work including necessary formwork etc., complete all as specified & as directed. |
| 29 | M & L for Second class hard wood plain, solid, straight frames / chowkats wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified & as directed. |
| 30 | S&F Second class hard wood glazed and skeleton shutters, 35mm thick, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing glass etc, sizes of members of shutters as specified in section 8, clause 8.24- (a) SSR Pt-I, supplied and fitted to chowkats complete all as specified & as directed. |
| 31 | S&F Flush door shutters 40 mm thick, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified & as directed. |
| 32 | S&F Powder coated aluminium sliding window, three way, frame & shutter with two glazed shutter and one wire mesh shutter with the following specification complete all as specified & as directed :-(i) Aluminium frame section 116x36.50x1.80mm.(ii) Aluminium shutter glazed/skeleton section 50x20x1.50mm thick.(iii) Aluminium grill size 50mmx 50mm and 5mm thick bars complete all as specified.(iv) Fixing arrangements of hold fast in walls including PCC (1:3:6) type C-1 block including making good distributed surfaces to match with adjoining surfaces (v) Glass 4mm thick ordinary quality and fixed with rubber gasket for glazed shutter etc.(vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm and fixed with rubber gasket for gauzed shutter etc.(vii) Aluminium roller, disc /bow hanle and locking system etc., complete. |
| 33 | S&F Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following specification all as specified & directed :-(i) Aluminium frame section 45x25x1.80mm.(ii) Fixing arrangements hold fast in walls with PCC (1:3:6) type C-1 block including making good distributed surfaces to match with adjoining surfaces (v) Frosted glass 4mm thick (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket for glazed shutter. |
| 34 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/sq mm and resistance to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & as directed. |
| 35 | S&F Factory Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sq mm, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified & as directed.(Note: Stainless steel butt hinges will be paid separately). |
| 36 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 37 | S&F 19mm thick Medium Density Fibre Board both side finished as in wardrobe, devided in compartments & drawers all as specified and as directed. |
| 38 | Supply & fixing Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with S S staples with wooden beading on wooden shutter or with screws to steel / aluminium shutter all as specified and as directed. |
| 39 | Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 exceeding half brick but not exceeding one brick all as specified and as directed. |
| 40 | S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe, guard bars etc and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 41 | S&F Continuous (piano) hinges, mild steel bright finish or electro galvanised Width of flaps 40mm (when open) complete all as specified and as directed. |
| 42 | S&F Butt hinges 100mm long 2.5mm thick stainless steel 202 grade, complete all as specified and as directed. |
| 43 | S&F 150mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and as directed. |
| 44 | S&F 125mm long aluminium anodized handles, fabricated type of extruded section complete all as specified and as directed. |
| 45 | S&F 150mm long aluminium handles, cast type anodized complete all as specified and as directed. |
| 46 | S&F 300mm long aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 47 | S&F 100mm size Hasp & staple aluminium anodised, safety type, including bolt to hinge plate and fixed with screw complete all as specified and as directed. |
| 48 | S&F 15mm dia Magic Eye stainless steel body fixed on door with all accessories complete all as specified and as directed. |
| 49 | S&F in repairs stainless steel decorative curtain rod of 20 mm dia bore with wood finishes (weight not less 300 gms per running meter) including fancy finale caps cap etc complete all as specified and as directed. |
| 50 | S&F in repairs Bracket for curtain rod 20 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with rawl plug of size not less than 50 mm long etc complete all as specified and as directed. |
| 51 | Taking up or down steel tubing and connections 15mm dia bore complete all as specified and as directed. |
| 52 | Taking up or down steel tubing and connections 20mm bore complete all as specified and as directed. |
| 53 | S&F CPVC Pipe 20mm outer dia (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified & as directed. |
| 54 | S&F CPVC Pipe 25mm outer dia (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 55 | S&F in repairs Stainless Steel (conforming to AISI -304 grade) Kitchen Sink with drain board of overall size 915mm x 460mm and bowl size 410mm x 355mm x 165mm depth made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe (heavy duty ) 90 cm long, and bedded in cement morter and fixed on CP cantilever brackets, complete all as specified & as directed. |
| 56 | S&F in Repair bib tap Sink Cock with flange, 15mm dia brass chromium plated, Wall Mounted, fixed to 15mm dia bore pipe complete all as specified & as directed. (Make:-PRAYAG Cat No 8316 or equivalent Approved make as specified PS and as approved by GE. |
| 57 | S&F in repairs Stainless steel plate rack of size 900mm x 900mm x 250mm including fixed with rawl plug and screws on walls complete all as specified & as directed. |
| 58 | S&F in Repair Vitreous China Wash hand basin, white flat back size 550x400 mm, and bedded in cement morter and fixed on CP cantilever brackets with following fittings all as specified & as directed :-(i) Pillar Tap 15 mm dia bore brass Chromium plated fancy type with capstan heads(ii) 32 mm dia waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts (iii) PVC corrugated waste pipe 32mm dia. |
| 59 | S&F Galvanised iron spout 40mm dia bore, medium grade complete all as specified and as directed. |
| 60 | S&F in Repair Vitreous China Wash down water closet pan, pedastel pattern (EWC), white in colour with and including plastic seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device, connection to outgoing pipe and flushing pipe complete all as specified & as directed. |
| 61 | S&F in repairs PVC Low level flushing cistern 10 ltr capacity including brackets, 32mm dia PVC flush pipe, fixing in position with PVC connection pipe 15mm dia 600mm long etc complete all as specified & as directed. |
| 62 | S&F in repairs 600mm x 450mm beveled edge mirror of selected quality, glass 5mm thick, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 63 | S&F 15mm dia brass chromium plated Wall mixer for mixing hot and cold water with provision of over head shower, for iron pipe complete all as specified & as directed. |
| 64 | S&F in repairs 15mm dia Bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified & as directed. |
| 65 | S&F in repairs Bib taps Quarter turn, 2 in 1 brass chromium plated 15mm dia fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified & as directed. |
| 66 | S&F in repair 15mm dia Stop Valves / Angle Cock fancy type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified & as directed. |
| 67 | S&F in repairs brass chromiun plated tubular towel rail, 20mm dia ‘D’ type, 60cm long between flanges complete all as specified & as directed. |
| 68 | S&F in repairs Shower rose 100mm dia, 3 flow brass chromium plated, including fixing to 15mm dia pipe or union complete all as specified & as directed. |
| 69 | S&F as in repair Hand Shower (Health Faucet) ABS, with 1 Mtr long tube & Hook complete all as specified & directed.(Make:- PRAYAG Cat No BEA-40 or equivalent make specified in P S and as approved by GE) |
| 70 | S&F in repairs Soap dish brass chromium plated gloss finish, fixed to wall with chromium plated brass screws complete all as specified & directed.(Make:- PRAYAG Cat No BA-45 or equivalent make specified in P S and as approved by GE) |
| 71 | S&F in repairs Toilet paper holder, stainless steel gloss finish, fixed to wall with chromium plated brass screws complete all as specified & as directed.(Make:- PRAYAG Cat No BA-18S or equivalent make specified in P S and as approved by GE) |
| 72 | M&L for Preparing new plastered wall surfaces including in narrow widths/ bands etc of any description and finishing as per following specification complete all specified and as directed :-(i) Applying 1 mm thick wall care putty on prepared wall surfaces finished to smooth surface(ii) Applying one coat of alkali resistant primer (iii) Applying two coats of Acrylic emulsion distemper |
| 73 | M&L for Preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all specified and as directed |
| 74 | M & L for applying two or more coats of 100% premium acrylic emulsion weather proof exterior paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior grade primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & as directed. |
| 75 | M & L for Complete removal of existing treatment on walls including in narrow widths/ bands etc of any description and finishing as per following specification complete all specified and as directed :-(i) Applying 1 mm thick wall care putty on prepared wall surfaces finished to smooth surface.(ii) Applying one coat of alkali resistant primer (iii) Applying two coats of Acrylic emulsion distemper |
| 76 | M&L for Preparation of Old decorated ceiling surface and applying two coat of white wash etc., complete and as specified & as directed. |
| 77 | M&L for Preparation of new wood or wood based surface exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete and as specified & as directed. |
| 78 | M&L for preparation of old treated steel surface over 10cm width or girth and applying two coats of synthetic enemal paint complete all as specified & as directed. |
| 79 | S & F in repairs PVC (SWR) floor trap, 75mm dia outlet plain with stainless steel grating including jointing with solvent cement etc complete all as specified & as directed. |
| 80 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified & as directed. |
| 81 | S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified & as directed. |
| 82 | S&F PVC (SWR) bends 110mm dia any radius with access door all as specified & as directed. |
| 83 | S&F PVC (SWR) bends 75 mm dia any radius with access door all as specified & as directed. |
| 84 | S&F PVC (SWR) junction single T, 110mm dia equal or unequal with access door all as specified & as directed. |
| 85 | S&F PVC (SWR) junction single T, 75mm dia equal or unequal with access door all as specified & as directed. |
| 86 | S&F PVC (SWR) branch piece Single Y, 110mm dia equal or unequal with access door all as specified & as directed. |
| 87 | S&F PVC (SWR) branch piece, Single Y, 75mm dia equal or unequal with access door all as specified & as directed. |
| 88 | S&F PVC (SWR) Vent cowl 110mm dia bore all as specified & as directed. |
| 89 | S&F PVC (SWR) Vent cowl 75mm bore all as specified & as directed. |
| 90 | S&F in repair Stasinless Steel Grating 100mm dia, With or Without Waste hole all as specified & as directed. |
| 91 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for roof /chajja padding including removal of debris Complete all as specified & as directed. |
| 92 | M&L for PCC (1:2:4) type B-0 using 12.5mm graded Crushed stone aggregate as in Padding over roof / chajja finished even and smooth without using extra cement all as specified & as directed. |
| 93 | M&L for Rendering 10mm thick cement mortar (1:3) over roof slab concrete surface finished even and smooth without using extra cement, mixed with WPC Complete all as specified & as directed.(Note : WPC will be measured and paid seprately). Please Enable Macros to View BoQ information |
| 94 | M&L for Rendering 10mm thick cement mortar (1:3) over roof slab concrete surface finished even and smooth without using extra cement, mixed with WPC Complete all as specified & as directed.(Note : WPC will be measured and paid seprately). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender