Defence Statutory Bodies & Commissions/Committees Closing in 2 days TDR #58319919

Tender For Repair To B/R And E/M Assets At Various Locations Of Khanabal At Sector -2 Under Age B/R (P) Of Ge 861 Ews

Issued by Statutory Bodies & Commissions/Committees · Anantnag, Jammu and Kashmir
Tender Value
43 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Repair To B/R And E/M Assets At Various Locations Of Khanabal At Sector -2 Under Age B/R (P) Of Ge 861 Ews

BOQ

Name of Work:- REPAIR TO B/R AND E/M ASSETS AT VARIOUS LOCATIONS OF KHANABAL AT SECTOR -2 UNDER AGE B/R (P) OF GE 861 EWS
Sl. No. Item Description
1Demolition cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge.
2Material & Labour for 25 mm thick PCC 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and directed by Engineer-in-Charge.
3Material & Labour for Non skid ceramic coloured joint free tiles , thickness 7mm to 8mm thick (square/ rectangular), colour as approved by Engineer-in-charge area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:6 with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge.complete all as specified and directed by Engineer-in-Charge.
4Material & Labour for Non skid ceramic coloured joint free tiles , thickness 7mm to 8mm thick (square/ rectangular), colour as approved by Engineer-in-charge area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting ,vertical surfaces set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick screed bed in cement mortar 1:4 with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge.
5Material & Labour for Virified Ceramic tiles10mm thick (square/rectangular) polished, (shade as approved by Engineer-in-charge ) , area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured/ shade cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:6 with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge.
6Material & Labour for Virified Ceramic tiles dark shade ,10mm thick (square/rectangular) polished, (shade as approved by Engineer-in-charge ) , area of each tiles not exceeding 0.36 Sqm , in vertical surfaces etc. set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 with and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge.
7Supply and fixing in replacement 20 mm bore bib tap cast copper alloy, chromium plated, fancy type (ISI marked) with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
8Supply and fixing in replacement 15 mm bore bib tap cast copper alloy, chromium plated, fancy type (ISI marked) with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.
9Supply & Fixing in replacement water closet vitreous china squatting pan, Orissa pattern size 580mm x 440mm white with integral foot rests with and including provision of lime concrete bedding with and including 110mm bore PVC (SWR)'P' Trap and connection to drain and to flushing pipe anti symphonage pipe complete all as specified and directed by Engineer-in-Charge.
10Supply and Fixing in replacement Vitreous china wash hand basin, Vitreous china white, flat back, size of 550mm x 400 mm with Mild steel brackets, with and including cutting for and pinning in ends of brackets or erecting stand, with and including waste fittings of brass chromium plated ,with and including 32mm dia PVC waste pipe of required length complete all as specified and directed. as directed by Engineer-in-Charge.
11Supply and Fixing in replacement PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle , with and including brackets, with and including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and as directed by Engineer-in- charge.
12Supply & Fixing in replacement Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
13Supply & Fixing in replacement Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.
14Material and Labour in replacement for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed in ceiling flat and sloping with nails , screws to timber frame work complete all as specified and directed by Engineer-in-Charge.
15Material and Labour in replacement for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed in wall with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.
16Material and Labour in replacement for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed in wall with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.
17Dismantling timber scantlings 40 sq. cm in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engineer-in-Charge.
18Material and labour for Second class soft wood in scantlings ,clean swan in framed work complete all as specified and directed by Engineer-in-Charge.
19Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area not exceeding 03 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.
20Material & Labour 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area exceeding 03 Sqcm but not exceeding 6 Sqcm splayed chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.
21Supply & fixing in replacement Rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position with and including Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in-charge. Note: The rate of 20mm bore ball valves, high pressure of PTMT is included in this iterm and nothing shall be paid extra on this account.
22Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm and not exceeding 4.00 Sqm complete all as specified and as directed by Engineer-in- charge.
23Taking down shutters of any description not exceeding 1.00 sqm each complete all as specified and as directed by Engineer-in- charge. Please Enable Macros to View BoQ information
24Taking down shutters of any description not exceeding 1.00 sqm each complete all as specified and as directed by Engineer-in- charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58319919
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Repair To B/R And E/M Assets At Various Locations Of Khanabal At Sector -2 Under Age B/R (P) Of Ge 861 Ews
Basic Detail
Tender No GE 861 EWS-64(T)/2026-27
Bidding Type Tender
Location
City Anantnag
State Jammu and Kashmir
Key Dates
Publish Date 31 Oct 2026
Submission Date 24 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 43 Lakhs
Tender Fee 500
EMD 86000
Exemption Not Available
Document List
BOQ_893557.xls
ec43aafc-1595-47c1-9052-1681fa39387f.html
SchofCredit64T.pdf
Tender64T.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 31, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_893557.xls

html

ec43aafc-1595-47c1-9052-1681fa39387f.html

pdf

SchofCredit64T.pdf

pdf

Tender64T.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender