Tender For Special Repair To Fencing In Armd Bde And Tk Tptr Coy Asc At Jalipa Mil Stn Under Ge (A) Barmer(Job No : 09/Bldg/Jlp/2025-26)
Tender Value
38.42 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
11 days left
EMD
76900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Fencing In Armd Bde And Tk Tptr Coy Asc At Jalipa Mil Stn Under Ge (A) Barmer(Job No : 09/Bldg/Jlp/2025-26)
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Excavating in trenches hard/ dense soil , n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out |
| 2 | M&L for PCC 1:4:8 type D-2 (using 40mm gde agg) as in foundation and mass concrete complete as specified and directed by Engr-in-Charge. |
| 3 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 4 | M&L for PCC 1:3:6 type C-2 (using 40mm gde agg) as in foundation and mass concrete for post holes complete as specified and directed by Engr-in-Charge. |
| 5 | S&F Joist, channel, angle ot tee sections, fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250) quality-A |
| 6 | Fixing only Joist, channel, angle ot tee sections, fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250)quality-A |
| 7 | S&F for MS flat iron fillets in posts and struts in fencing ,drilling holes (for securing wire mesh etc),including necessary drilling ,bolting or riveting etc confirming to Fe 410-0or fe 310-0 |
| 8 | Supply only Chain link MS galvanised fencing, any size (or) type of 3mm to 4mm dia wire. |
| 9 | S&F in repair 110 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 10 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and separating / Removing of concrete from embeded portion of post and making good disturbed ground |
| 11 | Dismantling fencing wire mesh, any type |
| 12 | Dismantling barbed wire fencing of any description |
| 13 | S & F for Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately). |
| 14 | M & L for painting one coat synthetic enamel paint on steel surface including preparation of old surface of any description , over 10 cm width or girth not otherwise described all as specified and directed |
| 15 | M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed. |
| 16 | M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description n.exc 10 cm width or girth incluidng necessary preparation of surface all as specified and directed. |
| 17 | fixing only chain link fencing including line wires, any mesh, size and type toany type of standards, rails, straning bolts, etc. including provision of binding wire |
| 18 | S & F 5 to 10mm mild steel in flat, round (or) square bars, in available length FE 410 W (GDE- E- 250) quality A |
| 19 | S&F mild stell screw bolts of 11 to 15 mm diameter of shank (machine made ) with hexagonal or squre heads at one end and screwed the other ,each screwed end to to be fitted with washers and one hexagonal or squre nut , exceeding 5 cm and not exceeding 10 cm long. |
| 20 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings (exclusive of steel sheeting or other covering, running ralls and guides) and hanging also fatening and fixing complete all as specified and as directed.(Fe-410 W Gde E-250-A) |
| 21 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 22 | M&L for Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 23 | M&L for Formwork for flat finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter all as specified and directed. |
| 24 | M&L for M-25 Cement concrete Foundations, includingrafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed. |
| 25 | M&L for Formwork for flat finished surfaces to sides of square, rectangular and polygon pillars,posts, struts, piers, columns and stanchions |
| 26 | M&L for Reinforced cement concrete (Nominal mix )M-25 in Columns, pillars, piers, posts and struts all as specified and directed. |
| 27 | M&L PCC 1:3:6 type C-1(Using 20mm graded crushed stone agg) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed incl demolition of old existing PCC band of any thickness and size |
| 28 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter |
| 29 | M&L 15mm thick plastering on concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L Preparation of newly plastered or unplastered surfaces on wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified. |
| 31 | Returning , filling in, includidng spreading , levelling , watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed. |
| 32 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender