Tender For Revival And Restoration Of Ganga Mata Temple/Kral Bab Ashram At Venkura Baramulla.
Tender Value
4.21 Crore
Estimated cost
Bid Submission
30 Nov 2026
26 days left
EMD
8.42 Lakhs
Bank guarantee accepted
Document Fee
8500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival And Restoration Of Ganga Mata Temple/Kral Bab Ashram At Venkura Baramulla.
BOQ
| Sl. No. | Item Description |
| 1 | PART A \\"Construction of Ashram near Ganga Mata Asthapan at Venkara\\"Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in- Charge.All kinds of soil: |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | P/L of stone soling incl. ramming, hand packing and all carriages, complete job in geocell, trenches, foundation etc. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 6 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone |
| 7 | Supplying and filling of RBM in plinth incl. spreading, dressing, watering with all carrriage etc complete |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 11 | R.C.C. work including straightening, cutting, Steel reinforcement for bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe- 1500D or more. |
| 12 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 13 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.. |
| 14 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 15 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 16 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 17 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:4 (1 cement: 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):KD wood or equivalent. |
| 19 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes/wooden boardings fill (KD wood) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. kd wood or equivalent |
| 20 | Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with: glass panes 3mm |
| 21 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: using KD wood or equivalent |
| 22 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm |
| 23 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. 75mm |
| 24 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 25 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm |
| 26 | Providing and fixing ISI marked oxidized M.S. air hook with necessary screws equivalent |
| 27 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm |
| 28 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1:4 (1 cement: 4 fine sand) |
| 29 | 6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) |
| 30 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 31 | CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 32 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 Itrs |
| 33 | VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 34 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter/10sqm. |
| 35 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 36 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 37 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 MM DIA |
| 39 | Providing and fixing jali for water closet or wash basin including P.V.C waste fittings complete: |
| 40 | Providing and fixing pvc pipes class c pipe incl vent soil waste and 100mm |
| 41 | Providing and fixing pvc pipes class c pipe incl vent soil waste and 75mm |
| 42 | PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4) |
| 43 | PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 25mm OD(SDR-7.4) |
| 44 | Providing & Fixing PVC (Prince Make) Door Tee 100mm size |
| 45 | Providing & Fixing PVC (Prince Make) Door Tee 75mm size |
| 46 | Providing & Fixing PVC (Prince Make) PVC collar 100mm |
| 47 | Providing & Fixing PVC (Prince Make) PVC collar 75mm |
| 48 | Providing & Fixing PVC (Prince Make) PVC Reducer 100x75mm |
| 49 | Providing & Fixing PVC (Prince Make) Floor Trap 100 mm size |
| 50 | Providing & Fixing PVC (Prince Make) Plain Bend 100 mm size |
| 51 | Providing & Fixing PVC (Prince Make) Plain Bend 75 mm size |
| 52 | Providing & Fixing PVC (Prince Make) Door bend 100mm |
| 53 | Providing & Fixing PVC (Prince Make) Door bend 75mm |
| 54 | C.P fittings: Nipples of different sizes |
| 55 | C.P fittings: Bib cock |
| 56 | C.P fittings: Angle valve |
| 57 | C.P fittings: Ball valve |
| 58 | C.P fittings: Coupling |
| 59 | C.P fittings: Basin Mixer |
| 60 | C.P fittings: Providing and fixing PTMT liquid soap container |
| 61 | C.P fittings: CP Gratings |
| 62 | C.P fittings: Wall Mixer |
| 63 | Construction of 9\\" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete (1:4:8), 12 mm thick inside cement plaster with finishing, making channels in cement concrete ( 1:2:4) incl. cost of manhole covers PVC ISI mark with frame size (1'-6\\" x1'-6\\" x 1 -6\\") inside size |
| 64 | P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar, racold or equivalent. |
| 65 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 66 | P/F HI ribcolor coated corrugated galvanizedPPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT total coated thickness) high tensile SMP Galvalumesteel with silicon ( modified ployester coating ofapproved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.5mm THICK (TATA, JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD /c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting (TILE PROFILE). |
| 67 | \\"Providing and fixing readymade polished wooden panelling for soffit, of approved design and quality, with a thickness of 20 mm (or specify as per approved design). The work includes cutting, finishing, and fixing in proper alignment, complete in all respects. |
| 68 | Providing and fixing ornamental, second-class, Kashmiri local Deodar wooden eaves boarding of size 300x30 mm as per approved design. The work includes cutting, dressing, finishing, and fixing the boards in proper alignment with joints and supports, complete in all respects. |
| 69 | Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement: 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement: 6 coarse sand) over 75 mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1 cement: 3 fine sand) and curing complete. |
| 70 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 18mm |
| 71 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040mm bowl depth 250mm |
| 72 | Supplying and laying medium class PVC conduit pipe for point wiring recessed/surface system, including standard PVC conduit accessories like bends, tees, junction boxes: 20 mm diameter. |
| 73 | Supplying and laying medium class PVC conduit pipe recessed/surface system with all premium PVC accessories: 25 mm diameter (Designed for circuit runs). |
| 74 | Providing and fixing wooden wall panelling using seasoned Kiln Dried (KD) wood, comprising 12 mm thick KD wood panelling boards fixed over 12 mm plyboard, including all necessary framing, backing members, mouldings, beading, skirting, screws, concealed fasteners, nails, adhesives and fittings. The work shall include machine sanding, filling, surface preparation and finishing with three coats of melamine/PU polish of approved shade and quality, complete in all respects as per approved drawings and as directed by the Engineer-in- Charge. |
| 75 | \\"Providing and fixing readymade polished wooden panelling for ceiling Fixed over a framework of 50 mm x 25 mm KD wood battens at required spacing, of approved design and quality, with a thickness of 20 mm (or specify as per approved design). The work includes cutting, finishing, and fixing in proper alignment with fixing of back boarding, complete in all respects. |
| 76 | Carriages for Different Materials: Crushed Aggregate Avg Lead of 40kms |
| 77 | Carriages for Different Materials: Sand Avg Lead of 20kms |
| 78 | Carriages for Different Materials: Bricks 55 km |
| 79 | PART B \\"Construction of Footpath, Stair steps and Gates etc.\\"Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil: |
| 80 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 81 | P/L of stone soling incl. ramming, hand packing and all carriages, complete job in geocell, trenches, foundation etc. |
| 82 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) |
| 83 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 84 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 85 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 86 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam. level and DPC level Thermo-Mechanically Treated bars of grade Fe- 500D or more. |
| 87 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 88 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 89 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 90 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 91 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 92 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 4 (1 cement: 4 coarse sand) upto plinth level including curing. One face dressed. Rough chisel dressed |
| 93 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in lime mortar 1: 2 (1 lime: 2 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed |
| 94 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 95 | Providing and fixing corbel projections of approved design on stone pillars, including all parts of the pillar-base, shaft, neck, and capital-as required. The corbel shall be properly dressed, shaped, and aligned to support beams, lintels, or decorative elements. The work shall include all materials, skilled labour, scaffolding, tools, and curing, complete in all respects as directed by the Engineer-in- Charge. |
| 96 | Providing and fixing Mandir Shikhar in high-grade brass (A-grade) in Alloy 260 (C26000), Alloy 360 (C36000), or Alloy 464 (C46400), meticulously crafted with traditional architectural detailing, having a base diameter of 1'6\\" and a height of 4' feet or as per approved design. The Shikhar shall be precision-cast or handcrafted with intricate motifs, embellishments, and religious symbolism, ensuring a smooth, polished, and aesthetically appealing finish. The fixing shall be done using corrosion-resistant fasteners and appropriate anchoring techniques to ensure structural stability and durability. The scope includes fabrication, transportation, lifting, positioning, and securely installing the Shikhar at the designated location, including necessary scaffolding, safety measures, and final finishing to achieve the desired ornamental and divine religious appeal as per architectural and specifications. |
| 97 | Providing and fixing Devri stone cladding tiles of 25 mm average thickness, machine-cut, dressed, and of uniform colour and texture, laid over a 12 mm thick cement mortar 1: 2 (1 cement: 2 coarse sand), including proper leveling, jointing with neat cement slurry, finishing of edges, curing, and cleaning of surface complete in all respects. The stone shall be of approved shade, free from cracks, honeycombs, and deleterious materials, as per sample approved by the Engineer-in-Charge. |
| 98 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 99 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 100 | Carriages for Different Materials: Crushed Aggregate Avg Lead of 20kms. |
| 101 | Carriages for Different Materials: Sand Avg Lead of 20kms |
| 102 | Carriages for Different Materials: devri stones 55km |
| 103 | Part - C: \\"Renovation of Ganga Mata Asthapan\\"Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead: Of sectional area 40 sqcm. and above. |
| 104 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of: G.S. Sheet |
| 105 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead: Of area of 3 sqm. and below. |
| 106 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil: |
| 107 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 108 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 109 | P/L of stone soling incl. ramming, hand packing and all carriages, complete job in geocell, trenches, foundation etc. |
| 110 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) |
| 111 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 112 | Supplying and filling of RBM in plinth incl. spreading, dressing, watering with all carrriage etc complete |
| 113 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 114 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 115 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 116 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete |
| 117 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 118 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 119 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in lime mortar 1:2 (1 lime: 2 coarse sand) upto plinth level including curing. One face dressed Fine chisel dressed |
| 120 | Extra for fine chisel dressed Devri Stone in square or rectangular Pillars |
| 121 | Extra for carving on Devri stones: Providing and executing carving work up to 75 mm depth on Devri stones of approved design, over the basic stone fixing work, including skilled mason labour, tools, dressing, finishing, and all materials required to achieve the approved design, complete in all respects as directed by the Engineer-in-Charge. |
| 122 | Providing and fixing stone projections of approved design in masonry walls, properly dressed and shaped, aligned to serve as supports for beams, lintels, or decorative elements. The work shall include all materials, skilled labour, scaffolding, tools, and curing, complete in all respects as directed by the Engineer-in-Charge. |
| 123 | Providing and fixing local slate stone roofing tiles of 25 mm average thickness, machine-cut, dressed, and of uniform colour and texture, laid over a 12 mm thick lime mortar 1: 2 (1 lime: 2 coarse sand), including proper leveling, jointing with neat cement slurry, finishing of edges, curing, and cleaning of surface complete in all respects. The stone shall be of approved shade, free from cracks, honeycombs, and deleterious materials, as per sample approved by the Engineer-in-Charge. |
| 124 | Providing and applying 20 mm thick traditional mud plaster over prepared surface after scraping and removing the existing Loose/damaged mud plaster, cleaning the surface, wetting where required, and applying selected clay mixed with fine sand and paddy straw (bhusa) in approved proportion, finished smooth to match the existing traditional finish, including disposal of unserviceable material within 50 m lead, complete in all respects as directed by the Engineer-in-Charge. |
| 125 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 126 | Providing hoisting and fixing trusses/purlins/ rafters/posts/joists/ post-plates or like components including cost of screws etc. complete. First class Budloo/Fir wood |
| 127 | Providing and fixing readymade polished wooden panelling for ceiling/soffit, fixed over a framework of 50 mm x 25 mm KD wood battens at required spacing, of approved design and quality, with a thickness of 20 mm (or specify as per approved design). The work includes cutting, finishing, and fixing in proper alignment with fixing of back boarding, complete in all respects. |
| 128 | Providing and fixing ornamental, second-class, Kashmiri local Deodar wooden eaves boarding of size 300×30 mm as per approved design. The work includes cutting, dressing, finishing, and fixing the boards in proper alignment with joints and supports, complete in all respects. |
| 129 | Providing and fixing ornamental wooden moulded corner beading of approved profile, size 40x40 mm (or as approved), manufactured from seasoned First Class KD wood, fixed at the junctions of wall panelling, ceiling panelling, columns, beams and other exposed edges, including machine moulding, necessary screws, wooden plugs, adhesive, nails, fittings, machine sanding and finishing with melamine/PU polish or paint as specified, complete in all respects as per approved drawings and as directed by the Engineer-in-Charge. |
| 130 | Providing and fixing wooden wall panelling using seasoned Kiln Dried (KD) wood, comprising 12 mm thick KD wood panelling boards fixed over 12 mm plyboard, including all necessary framing, backing members, mouldings, beading, skirting, screws, concealed fasteners, nails, adhesives and fittings. The work shall include machine sanding, filling, surface preparation and finishing with three coats of melamine/PU polish of approved shade and quality, complete in all respects as per approved drawings and as directed by the Engineer-in-Charge. |
| 131 | Providing and fixing 35 mm thick ornamental heritage wooden wall cladding in first-class seasoned Deodar wood, comprising hand-carved decorative panels, mouldings and traditional Kashmiri architectural patterns, fixed over treated wooden battens/framework with approved screws, dowels, concealed fasteners and necessary hardware, including all cutting, fitting, carving, scaffolding, sanding and finishing, complete in all respects as directed by the Engineer-in-Charge. |
| 132 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:4 (1 cement: 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 133 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD wood or equivalent. |
| 134 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes/wooden boardings fill (KD wood) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. kd wood or equivalent |
| 135 | Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with: 3mm glass panes |
| 136 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: using KD wood or equivalent |
| 137 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm |
| 138 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. 75mm |
| 139 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 140 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm |
| 141 | Providing and fixing ISI marked oxidized M.S. air hook with necessary screws equivalent |
| 142 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm |
| 143 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement: 4 coarse sand): |
| 144 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers' specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter/10sqm. |
| 145 | P/F HI ribcolor coated corrugated galvanizedPPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalumesteel with silicon modified ployester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area) 0.5mm THICK (TATA, JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD i/c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting (TILE PROFILE). |
| 146 | Providing and fixing Mandir Shikhar in high-grade brass (A-grade) in Alloy 260 (C26000), Alloy 360 (C36000), or Alloy 464 (C46400), meticulously crafted with traditional architectural detailing, having a base diameter of 2' and a height of 6' feet or as per approved design. The Shikhar shall be precision-cast or handcrafted with intricate motifs, embellishments, and religious symbolism, ensuring a smooth, polished, and aesthetically appealing finish. The fixing shall be done using corrosion-resistant fasteners and appropriate anchoring techniques to ensure structural stability and durability. The scope includes fabrication, transportation, lifting, positioning, and securely installing the Shikhar at the designated location, including necessary scaffolding, safety measures, and final finishing to achieve the desired ornamental and divine appeal as per architectural and religious specifications. |
| 147 | Carriages for Different Materials: Crushed Aggregate Avg Lead of 20kms. |
| 148 | Carriages for Different Materials: Sand Avg Lead of 20kms |
| 149 | Carriages for Different Materials: Bricks 55 km |
| 150 | Carriages for Different Materials: devri stones 55km |
| 151 | PART D \\"Construction / Erection of Fencing\\"Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil: |
| 152 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 153 | P/L of stone soling incl. ramming, hand packing and all carriages, complete job in geocell, trenches, foundation etc. |
| 154 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) |
| 155 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:12:3 (1 cement: 1/2 coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 156 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 157 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 158 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 159 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 160 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 161 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per meter cost of total length of barbed wire used. With G.I. barbed wire |
| 162 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 163 | 12 mm Thick 1:4 cement sand plaster |
| 164 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm). |
| 165 | Carriages for Different Materials: Crushed Aggregate Avg Lead of 20kms |
| 166 | Carriages for Different Materials: Sand Avg Lead of 20kms |
| 167 | Part - E: \\"Renovation of Kuthya\\"Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead: Thickness above 25 mm upto 40 mm. |
| 168 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead: Of sectional area 40 sqcm. and above. |
| 169 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class deodar wood |
| 170 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows (32mm) fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately but including cost of tower bolts, handles etc., all complete as per direction of Engineer-in-charge. First Class deodar wood |
| 171 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick First Class deodar wood |
| 172 | Providing hoisting and fixing trusses/purlins/rafters/posts/joists/ post-plates or like components including cost of screws etc. complete. First class Budloo/Fir wood |
| 173 | Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface. Second class Deodar Wood 25mm thick |
| 174 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90 litre/10sqm over an under coat of primer applied @ 0.75 litre/10 sqm of approved brand and manufacture |
| 175 | Providing and applying 20 mm thick traditional mud plaster over prepared surface after scraping and removing the existing loose/damaged mud plaster, cleaning the surface, wetting where required, and applying selected clay mixed with fine sand and paddy straw (bhusa) in approved proportion, finished smooth to match the existing traditional finish, including disposal of unserviceable material within 50 m lead, complete in all respects as directed by the Engineer-in-Charge. |
| 176 | Providing and fixing hand-crafted turned/carved Deodar wood balusters of approved heritage pattern, approximately 75 mm x 75 mm section and 900 mm to 1000 mm height, seasoned Deodar wood, including turning, carving, moulding, sanding, fixing with hardwood dowels, screws, adhesive, tenons, mortises, all necessary fittings, finishing smooth and matching the existing heritage work, polishing/melamine polish or painting as specified, complete in all respects as directed by the Engineer-in-Charge. |
| 177 | Providing and fixing heritage handrail (top rail) in first-class seasoned Deodar wood, of approved profile and size (approximately 75 x 125 mm or as per existing), including moulding, shaping, chamfering, carving wherever required, forming joints, fixing over existing/new wooden balusters and newel posts with concealed screws, dowels, adhesive and all necessary hardware, polishing/melamine polish or painting as specified complete with sanding and finishing, matching the existing heritage work, as directed by the Engineer-in-Charge. |
| 178 | Providing and fixing 20 mm thick ornamental timber lattice (Pinjra Kari) work of approved heritage pattern/design, fabricated from Ist. Class seasoned Deodar wood, including all necessary framing, beading, screws, nails, adhesives, fittings, fixtures and hardware, complete with rubbing, polishing/melamine polish or painting as specified, including all labour, carriage and incidental charges, complete in all respects as per approved drawings and as directed by the Engineer-in-Charge. |
| 179 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil: |
| 180 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 181 | P/L of stone soling incl. ramming, hand packing and all carriages, complete job in geocell, trenches, foundation etc. |
| 182 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) |
| 183 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 184 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 185 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 186 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe- 500D or more. |
| 187 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 188 | \\"Providing and fixing readymade polished wooden panelling for ceiling/soffit, fixed over a framework of 50 mm x 25 mm KD wood battens at required spacing, of approved design and quality, with a thickness of 20 mm (or specify as per approved design). The work includes cutting, finishing, and fixing in proper alignment with fixing of back boarding, complete in all respects. |
| 189 | Providing and fixing ornamental, second-class, Kashmiri local Deodar wooden eaves boarding of size 300x30 mm as per approved design. The work includes cutting, dressing, finishing, and fixing the boards in proper alignment with joints and supports, complete in all respects. |
| 190 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture wood finish color |
| 191 | Carriages for Different Materials: Crushed Aggregate Avg Lead of 20kms |
| 192 | Carriages for Different Materials: Sand Avg Lead of 20kms |
| 193 | Part - F: \\"Upgradation of Approach Road\\"Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil: |
| 194 | Providing and laying of RBM using nallah muck, quarry much or as per availibility material for filling, including dressing of surface to required levels and grades. The work includes collection, carriage, and stacking of Nallah RBM from approved sources, spreading in layers not exceeding 225 mm in loose thickness, watering, and compacting with vibratory roller or any suitable means to achieve required compaction and level. The finished surface shall be firm and properly set for further construction activities. The rate includes mechanical lead upto 15km and head load upto 50mtrs. complete work in all respects as per the directions of the Engineer-in-Charge. |
| 195 | P/L WBM with specified stone agg, stone screening & binding material with quarry stone agg.63-45mm size & screening 13.2 mm size to specified lines grades and cross sections incl. carriages of materials required complete job. |
| 196 | Providing, laying, spreading and compacting graded stone aggs (size range 53 mm to 0.075mm) to wet mix macadam (WMM) specifications including premixing the material with water in mechanical mixing plant, carriage of mixed material by M.T. for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the density, complete as per specifications in patches/ stretches. Complete Job |
| 197 | Providing and applying tack coat using hot straight run bitumen of grade-VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. Complete job |
| 198 | Providing and laying 50 mm thick Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder @3.50% and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density in patches/stretches. Complete Job |
| 199 | Providing and laying 25 mm thick semi-dense Bituminous coat using crushed stone aggregates of specified grading, premixed with bituminous binder @ 5% and filler, transporting the hot mix to work site by tippers, laying with paver finisher to the required grade, level and alignment and rolling with smooth wheeled /vibratory rollers to achieve the desired compaction and density as per specification. Complete Job |
| 200 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete. |
| 201 | Providing and laying RCC spun pipes including trench excavation, re-filling with required cushion, carriage and rolling with road roller all complete. 18\\" DIA |
| 202 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material. etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 203 | Carriage of materials By Mech. Transport, from source to site of work: Stone agg. from for an avg lead of 30 km |
| 204 | Carriage of materials By Mech. Transport, from source to site of work: Screening from an avg lead of 30 km |
| 205 | PART G\\"Construction of Protection Works\\"Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil: |
| 206 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 207 | P/L of stone soling incl. ramming, hand packing and all carriages, complete job in geocell, trenches, foundation etc. |
| 208 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) |
| 209 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 210 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc. |
| 211 | Carriages for Different Materials: Crushed Aggregate Avg Lead of 20kms |
| 212 | Carriages for Different Materials: Sand Avg Lead of 20kms |
| 213 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil: |
| 214 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 215 | P/L of stone soling incl. ramming, hand packing and all carriages, complete job in geocell, trenches, foundation etc. |
| 216 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) |
| 217 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 218 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone |
| 219 | Supplying and filling of RBM in plinth incl. spreading, dressing, watering with all carrriage etc complete |
| 220 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 221 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 222 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:12:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 223 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at plinth beam level and DPC level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 224 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 225 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 226 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 227 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 228 | Edges of slabs and breaks in floors and walls Under 20 cm wide |
| 229 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:4 (1 cement: 4 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 230 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):KD wood or equivalent. |
| 231 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes/wooden boardings fill (KD wood) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. kd wood or equivalent |
| 232 | Providing and fixing glass panes with required beading and glazing clips in doors, windows, clerestory windows, all complete with: 3mm glass panes |
| 233 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: using KD wood or equivalent |
| 234 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm |
| 235 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. 75mm |
| 236 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 237 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 100x10 mm |
| 238 | Providing and fixing ISI marked oxidized M.S. air hook with necessary screws equivalent |
| 239 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete: 300x16 mm |
| 240 | CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1:4 (1 cement: 4 fine sand) |
| 241 | 6MM CEMENT PLASTER 6 mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) |
| 242 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 243 | CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 244 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 ltrs |
| 245 | VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 246 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers' specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter/10sqm. |
| 247 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 248 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 249 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 250 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 MM DIA |
| 251 | Providing and fixing jali for water closet or wash basin including P.V.C waste fittings complete: |
| 252 | Providing and fixing pvc pipes class c pipe incl vent soil waste and pipes (100mm) |
| 253 | Providing and fixing pvc pipes class c pipe incl vent soil waste and pipes (75mm) |
| 254 | PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4) |
| 255 | PP-R PIPES AND FITTINGS Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe, 25mm OD(SDR-7.4) |
| 256 | Providing & Fixing PVC (Prince Make) following fittings complete: Door Tee 100mm size |
| 257 | Providing & Fixing PVC (Prince Make) following fittings complete: Door Tee 75mm size |
| 258 | Providing & Fixing PVC (Prince Make) following fittings complete: PVC collar 100mm |
| 259 | Providing & Fixing PVC (Prince Make) following fittings complete: PVC collar 75mm |
| 260 | Providing & Fixing PVC (Prince Make) following fittings complete: PVC Reducer 100x75mm |
| 261 | Providing & Fixing PVC (Prince Make) following fittings complete: Floor Trap 100 mm size |
| 262 | Providing & Fixing PVC (Prince Make) following fittings complete: Plain Bend 100 mm size |
| 263 | Providing & Fixing PVC (Prince Make) following fittings complete: Plain Bend 75 mm size |
| 264 | Providing & Fixing PVC (Prince Make) following fittings complete: Door bend 100mm |
| 265 | Providing & Fixing PVC (Prince Make) following fittings complete: Door bend 75mm |
| 266 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge: Nipples of different sizes |
| 267 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge: Bib cock |
| 268 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge: Angle valve |
| 269 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge: Ball valve |
| 270 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge: Coupling |
| 271 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge: Basin Mixer |
| 272 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge: Providing and fixing PTMT liquid soap container |
| 273 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge: CP Gratings |
| 274 | Providing & Fixing following C.P fittings of standard quality & approved make incl. all fixtures etc complete as per directions of engineer in charge: Wall Mixer |
| 275 | Construction of 9\\" thick brick masonary manholes in cement mortar (1:4) mix, foundation cement concrete (1:4:8), 12 mm thick inside cement plaster with finishing, making channels in cement concrete (1:2:4) incl. cost of manhole covers PVC ISI mark with frame size (1'-6\\" x1'-6\\" x 1 -6\\") inside size |
| 276 | P/F of Geysers 50-Litre 2000-Watt Storage Water Heater (White) incl. all fittings and fixtures make: venus, jacquar, racold or equivalent. |
| 277 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 278 | P/F HI ribcolor coated corrugated galvanizedPPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalumesteel with silicon modified ployester coating ofapproved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.5mm THICK (TATA, JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD /c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting (TILE PROFILE). |
| 279 | \\"Providing and fixing readymade polished wooden panelling for soffit, of approved design and quality, with a thickness of 20 mm (or specify as per approved design). The work includes cutting, finishing, and fixing in proper alignment, complete in all respects. |
| 280 | Providing and fixing ornamental, second-class, Kashmiri local Deodar wooden eaves boarding of size 300x30 mm as per approved design. The work includes cutting, dressing, finishing, and fixing the boards in proper alignment with joints and supports, complete in all respects. |
| 281 | Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement: 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement: 6 coarse sand) over 75 mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1 cement: 3 fine sand) and curing complete. |
| 282 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 18mm |
| 283 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040mm bowl depth 250mm |
| 284 | Supplying and laying medium class PVC conduit pipe for point wiring recessed/surface system, including standard PVC conduit accessories like bends, tees, junction boxes: 20 mm diameter. |
| 285 | Supplying and laying medium class PVC conduit pipe recessed/surface system with all premium PVC accessories: 25 mm diameter (Designed for circuit runs). |
| 286 | Providing and fixing wooden wall panelling using seasoned Kiln Dried (KD) wood, comprising 12 mm thick KD wood panelling boards fixed over 12 mm plyboard, including all necessary framing, backing members, mouldings, beading, skirting, screws, concealed fasteners, nails, adhesives and fittings. The work shall include machine sanding, filling, surface preparation and finishing with three coats of melamine/PU polish of approved shade and quality, complete in all respects as per approved drawings and as directed by the Engineer-in-Charge. |
| 287 | \\"Providing and fixing readymade polished wooden panelling for ceiling fixed over a framework of 50 mm x 25 mm KD wood battens at required spacing, of approved design and quality, with a thickness of 20 mm (or specify as per approved design). The work includes cutting, finishing, and fixing in proper alignment with fixing of back boarding, complete in all respects. |
| 288 | Carriages for Different Materials: Crushed Aggregate Avg Lead of 10kms |
| 289 | Carriages for Different Materials: Sand Avg Lead of 20kms |
| 290 | Carriages for Different Materials: Bricks 55 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender