Tender For A)Repair To Sanitary, Electric/Renovation Of Family Quarters One Room Sets 12 Nos, B) Repair/ Renovation Of Electricity Fitting And Sanitary Repairs To 02 No Washroom Of Inmates Barrack, C) Renovation Of Rp Gate And Tile Work To Main Entry
Tender Value
24.84 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
1 days left
EMD
49680
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for A)Repair To Sanitary, Electric/Renovation Of Family Quarters One Room Sets 12 Nos, B) Repair/ Renovation Of Electricity Fitting And Sanitary Repairs To 02 No Washroom Of Inmates Barrack, C) Renovation Of Rp Gate And Tile Work To Main Entry At Rp Gate At District Jail Kishtwar (C. No.30)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per directions Kiln seasoned and chemically treated hollock wood 30mm |
| 2 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt- hinges bright finished of required size with necessary screws. all complete as per direction of engineer- in charge. 35mm thick. Kiln seasoned and chemically treated hollock wood |
| 3 | Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface with imported wood panneling 12 mm thick over and incl P/F of frame work of 50x50mm imported wood for base of lining/cladding with necessary screws |
| 4 | Finishing walls with premium Acrylic smooth exterior paint with silicon additives of required shade: Old work (Two or more coats applied @ 1.43 liters/ 10 sqm) over existing cement paint surface. |
| 5 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 6 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm to 2mm thick |
| 7 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 9 | Providing fixing Ply wood 12mm comercial ply |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 11 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 12 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade |
| 13 | ( A ) Area of slab over 0.5 sqm 16mm th |
| 14 | ( B ) Area of slab upto 0.5 sqm 16mm th |
| 15 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 16 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 17 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 18 | Internal work-exposed on wall with clamps at 1.00 meterspacing PN-16 pipe , 32mm OD(SDR-7.4) |
| 19 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 32mm OD(SDR-7.4) |
| 20 | Providing and fixing PPR Unions PPR Union 32mm |
| 21 | Providing and fixing PPR Ball value 32mm |
| 22 | Providing and fixing Tankey nipple GI 25mm |
| 23 | Providing and fixing 15 mm nominal bore C.P. brass wall mixer of approved make conforming to IS : 8931 |
| 24 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 a) 15 mm nominal bore |
| 25 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 26 | Providing and fixing C.P. brass Angle valve approved quality conforming to IS : 8931 a) 15 mm nominal bore |
| 27 | Providing and fixing C.P. Gate valve approved quality conforming to IS : 8931 a) 15 mm nominal bore |
| 28 | Providing and fixing . Ballvalve approved quality conforming to IS : 8931 a) 15 mm nominal bore |
| 29 | Constructing brick masonarry collection chambers 450X450 internal size and 450mm deep fixed with C I cover and frame 300x 300 mm |
| 30 | Providing and fixing PVC conduits of dia 20mm. As required |
| 31 | Wiring for lighting points / fan points/ exhaust points/ call bell points with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable This excludes conduit make Anchor/finolex/polycab or equivalent.B) Lighting points Group B |
| 32 | Re-Wiring for lighting points / fan points/ exhaust points/ call bell points with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable This excludes conduit make Anchor/finolex/polycab or equivalent.B) Lighting points Group B |
| 33 | wiring for light / power plug with 2x4 sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1x4sqmm FRLS PVC insulated copper conductor single core for loop earthing |
| 34 | Supply and drawing the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required make Anchor/finolex/polycab or equivalent. |
| 35 | Sub main 2x2.5 sqmm |
| 36 | Sub main 2x4 sqmm |
| 37 | Sub main 2x10sqmm |
| 38 | Supply and fixing following modular switch/ socket on the existing modular plate including conections etc as required. But excl modular plate. |
| 39 | 5/6 A switch |
| 40 | 15/16 A switch |
| 41 | 5/6 A socket out let |
| 42 | 15/16 A socket out let |
| 43 | Supply and fixing following size / modules GI box along with modular base and cover plate for modular switches in recess etc required. |
| 44 | 1 or 2 module 75x75mm |
| 45 | 3 module 100x75mm |
| 46 | 6 module 200x75mm |
| 47 | Supply and Fixing of following way horizontal type three pole and neutral, sheet steel, MCB distribution board , 415 V on surface / recess complete with tinned copper bus bar , neutral bus bar, earth bar, din bar, interconnections, Powder painted including earthing etc. as required. ( but without MCB /RCCB / isolator ) make Anchor/finolex/polycab or equivalent. |
| 48 | Supply and fixing of 5 amps to 32 amps rating 240/415 Volts 10KA \\"C\\" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB comlete with connections, testing and commissiong etc as required of approved brand make Anchor/finolex/polycab or equivalent. |
| 49 | Single pole |
| 50 | Double pole |
| 51 | Supply and fixing of following rating double pole single phase and neutral 240 Volts residual current circuit breaker (RCCB) having a sensitive current of 30mA in the existing MCB DB comlete with connections, testing and commissiong etc as required of approved brand make Anchor/finolex/polycab or equivalent. 63 A. |
| 52 | Installation ,testing , commissioning of wall bracket /ceiling fittings of all sizes and shapes containing up to two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 53 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 54 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix |
| 55 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) 50 mm thick with 20mm nominal size stone aggregate. |
| 56 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead. |
| 57 | CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix: ( 1 cement : 6 coarse sand) |
| 58 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm |
| 59 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 450x600 mm |
| 60 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm |
| 61 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White |
| 62 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 63 | Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap. |
| 64 | P/F of PVC Class C waste pipes and fittings |
| 65 | 100mm dia pipe |
| 66 | 75mm dia pipe |
| 67 | Plain bend of required degree 100mm |
| 68 | Plain bend of required degree 75mm |
| 69 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. |
| 70 | Providing and fixing . PVC connection 24\\" long incl nuts and washers |
| 71 | Providing and fixing . Water heater gyser 50 liter capacity |
| 72 | Providing and fixing 1st quality ceramic glazed tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 73 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 74 | Installation ,testing , commissioning of exhaust fans 450 dia sweep mtal body and blades AC single phase incl cutting walls and making good. Incl mounting on wall |
| 75 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 25 metres: |
| 76 | P/L of Nallah boulder 150mm size dry hand packed incl all leads complete job. |
| 77 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) (A) Crushed |
| 78 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:2:4 (1cement: 2coarse sand: 4 graded stone aggregate 20mm nominal size) |
| 79 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Medium shade using 50% white cement and 50% ordinary cement. |
| 80 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 81 | Reinforcement for RCC incl straightening , cutting , bending and binding in position TMT bars |
| 82 | Centring and shuttermg including strutting, propping etc. and removal of form work |
| 83 | for Foundations: footings, bases of columns etc. for mass concrete. |
| 84 | Carraige of different materials from sourse to site of work by M.T. |
| 85 | Stone Agg/ sand 20 Km+ 200 mtr by HL |
| 86 | Sand from 30 Km + 200 mtr by HL Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender