Tender For Providing & Fitting Of Horizontal Pumping Unit 01 No. And Other Works For Water Supply Scheme Trich Under M&E (Ut Capex).
Tender Value
3 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
7 days left
EMD
6000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing & Fitting Of Horizontal Pumping Unit 01 No. And Other Works For Water Supply Scheme Trich Under M&E (Ut Capex).
BOQ
| Sl. No. | Item Description |
| 1 | Supply, installation, testing and commissioning of Horizontal pumping unit as per IS 1520 with following specification:-Pump:-1.Type :- Horizontal split casing Discharge = 18000 GPH Head = 30 Mtrs Motor Rating = 15 KWMaterial of construction1. Impeller:- Stainless steel/chrome steel 2. Pump Shaft:- Stainless steel 4103. Pump casing:- Cast Iron The pump shall confirm to IS-1520 code MOTOR :- A) Type :- Horizontal squirrel cage Induction TypeB) No. of phases:- 3 phase 415 V+10%,50 Hz, AC supplyC) Winding:- Copper wound squirrel cageD) Type of enclosure:- SPDP/TEFCE) Method of cooling:- Air cooled with fan mountedF) Method of Starting: star deltaThe pump-motor should be mounted on a common base frame fabricated out of M.S channel of suitable size and duly fitted with T- type foundation bolts /nuts and washers to make the pumping unit vibration free. The pump and motor should be coupled through suitable coupling. The coupling faces checked for both angular and axial alignment with the help of tapered gauges/feeler gauges or dial indicator. Job includes testing and commissioning of pumping unit on full load at site.Note: Test certificate having the Serial No. of the Pumping Unit along with the performance curve in duplicate from the Manufacturer must be produced on delivery of the item and pumping unit is to be approved from the concerned Sub Divisional office before procuring. |
| 2 | Replacement of damaged 150mm DN Rising Main pipe by way of Providing and fitting of G.I flanged Rising Main at site. The Pipe shall be hot dip Galvanized, class C confirming to IS 1239. The job includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16). The flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make.Flanges (as per IS 6392/1997 Table:17)Thickness shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint.Welding ElectrodeDC Arc Welding using welding electrode having diameter not less than 4mm. Nuts and BoltsNuts and Bolts (conforming to IS:1363 Part 1st) Rubber Insertion GasketsRubber Insertion Gaskets (conforming to IS: 638/79) to be used between flanged joints. The main technical specifications of the pipe are given here under:Size: DN 125 mm Class: C |
| 3 | Fabrication, Providing and fitting of Y- junction having 1m length (Approx.) of each arm to be fabricated out of hot dip galvanized G.I, C-Class pipe. The job also includes Providing and welding of M.S flanges to the ends of each arm. The Thickness of flange shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint by dint of DC arc welding. The job further includes Providing and Fitting of nuts and bolts (conforming to IS:1363 Part 1st) and Rubber Insertion Gaskets (conforming to IS: 638/79) to be used between flanged joints. The size of the Y- junction is given below:Dia of Pipe: 125 mm |
| 4 | Providing & fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) (PN16) 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber (Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve.Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.Size: 125 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender