Tender For Supply & Fixing Of Octagonal Pole With Single Arm In Kacheri Churaha To Kabba Kheda At Nagar Palika Parishad, Unnao
Tender Value
69.17 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
15 days left
EMD
6.91 Lakhs
Bank guarantee accepted
Document Fee
8980
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Unnao → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply & Fixing Of Octagonal Pole With Single Arm In Kacheri Churaha To Kabba Kheda At Nagar Palika Parishad, Unnao
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Fixing of Octagonal pole with Single Arm in Kacheri Churaha To Kabba Kheda at Nagar Palika Parishad, Unnao |
| 2 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3 mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect.(Sl No. 21.2.PWD SOR-2024) |
| 3 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT- AAA (Sl No. 23.16 PWD SOR-2024) |
| 4 | Supply and laying 16 Sqmm 4 core size of Aluminium Conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top as directed by Engineer in Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (Sl No. 20(A) 1.9 PWD SOR-2024) |
| 5 | Supply and Wiring of submains with 06 Sqmm 02 core FRLSH PVC insulated 1100 V grade multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge.(Sl No. 20(C) 1.1 PWD SOR-2024) |
| 6 | Supply and fixing 40 A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. (Sl No. 807(f-ii) PWD SOR-2018) |
| 7 | Supply and laying of 32mm x 6mm GI strip from earth electrode directly in the ground as required complete in all respect. (SI. No-716 PWD SOR-2018) |
| 8 | Supply and fixing of 18 Mtr Triglow Rope Light all complete. |
| 9 | Supply & Fixing of Logo pattern made up of MS Sheet andhaveingress protection of IP66 for optical compartment. The decorative pattern shall beof height 1mtr with width 750 mm level with LED of 20 Wt oglowpre designed UPSIDA Logoand Tag line with noticeable mode. Logo made of MS sheet with finela sercut design tailored with lightning to suityours pecific need sasper detail drawing. Luminaire logoprimarily coated with epoxyresinandtopcoated with powdercoat.Light out put of source is more than 100lm/watt, surge protection 4k,operatingvoltage140-270V. Fitting is complete in all aspects with all accessories with foundation bolt or fastener As per AOR Attached with 03 year maintenance & warranty on manufacturing |
| 10 | S/F of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete all respect as per direction of the E/I (Sl No. 504 PWD SOR-2018) (i) 25 Sqmm |
| 11 | Supply and fixing of crimping shoulderless copper tin electroplated lugs of Dowells/Ismail make suitable of 1.5 sqmm to 2.5 sqmm cables.(SI. No-1129 PWD SOR-2018) |
| 12 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3 On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender