Housing Urban and Rular Development Government Departments Closing in 1 days TDR #58315111

Tender for Tender for Widening And Strengthening Work Of Shahganj Link Road (O.D.R.) Into 04 Lanes In District Jaunpur (Including 05 Years Maintenance)

Issued by Government Departments · Jaunpur, Uttar Pradesh
Tender Value
23.40 Crore
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
35.10 Lakhs
Bank guarantee accepted
Document Fee
5590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jaunpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Widening And Strengthening Work Of Shahganj Link Road (O.D.R.) Into 04 Lanes In District Jaunpur (Including 05 Years Maintenance)

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 07-Nov-2026 Date Corrigendum 5687 Date 17-Nov-2026
2 15-Nov-2026 Rate Corrigendum Other 23-Nov-2026
3 16-Nov-2026 Date5825 Date 23-Nov-2026

BOQ

Name of Work:- & tuin tkSuiqj esa kkgxat fyad jksM ¼v0ft0ek0½ ds 04 ysu esa pkSM+hdj.k ,oa lqn`<+hdj.k dk dk;ZA
Sl. No. Item Description
1Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
2Construction of Embankment with Material Deposited from Roadway Cutting:- Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
3Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet 95% proctor density requirement of table No.300-2 MORTH specification no. 305 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
4Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
5Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
6Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
7Providing and applying tack coat1st with VG.-10 using emulsion pressure distribut or attherate of 0.20 kg per sqm in the norms bituminous surface cleaned with mechanical broom. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
8Providing and laying dense graded bituminous macadam grade-1 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder (VG-40) @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
9Providing and laying dense graded bituminous macadam grade-2 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder (VG-40) @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
10Providing and laying bituminous concrete (Grade-2) with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder(VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
11Construction of subgrade and earthen shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrowpits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement to Table 300-2 (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
12Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. As per MORTH Sr.No. 13.10 and 710.1.4.of IRC:78 and 2200 (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
13Plain cement concrete 1:3:6 with crushed stone nominal mix in foundation aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curring for 14 days. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
14RCC Grade M30 using batching plant transit mixer & manual placing as per MORTH SI. No. 12.9 Case-II and specification No.1500, 1700, 2100 (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
15Supplying, fitting and placing HYSD reinforcement complete in sub-structure drawing as per and Technical Specification As per MORTH Sr.No. 12.40 and Specification No. 1600 (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
16Plain cement concrete in open foundation complete and as per drawing technical specifications. (M- 15) As per MORTH Sr.No. 12.8 and Specification No. 1500, 1700 & (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
17Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
18Providing weep holes in Brick masonry /plain /Reinforced concrete abutment, wing wall/ return wall with 100mm dia AC pipe extending through the full width of the structure with slope of 1V:20H towards drawing foce. Complete as per drawing and technical specificationsl No. 2706 & 2200 (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
19RCC Grade M20 using batching plant transit mixer & manual placing Concrete from sub-analysis of concrete rate using batching plant 20 cum capacity.
20Providing Laying & fixing of 900mm dia. Hume Pipe in culvert including cost of collar etc complete. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
21M-150 brick work in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. in culvert. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
22Struck pointing with cement mortar consisting 1 part cement and 2 parts of sand of 1.25 fineness modulus including supply of all materials labour and T&P etc. required for proper completion of the work. in culvert. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
23Reinforced cement concrete M-15 grade Kilometer stone of standard design as per IRC:8-1980, fixing in position including including painting and printing etc. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
24Reinforced cement concrete M-15 grade Hectometer stone (precast) of standard design as per IRC:8-1980, fixing in position including including painting and printing etc. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
25Applying one coat of white cement over new surface including rubbing with sand paper including all materials T&P etc. required for proper completion of the work. NBO 18.52. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
26Supply & Erection of built up overhead structure 12.00 M to 15.00M span comprising of three vertical post of 6.00 M high made up of 300 mm N.B. havey class M.S. pipe as vertical member welded with 10mm M.S. plate at top & bottom for bearing of horizantal frame comprising of 40 mm . N.B. made havey class main pipe as of 25 mm class medium N.B. pipe bracing as per approved designed drawing with one coat of steel primer and two coats of synthetic enamle paint complate the work includes construction of RCC fundation of size 0.75x0.75M & 1.2 M deep for built up Overhead Structure including earth work in excavation , 100 mm thick Lean Concrete in 1:4:8 cement , course sand and 40 mm gauge stone balllast , RCC with 1:2:4 cement , Course sand and 20 mm stone grit including supply of grouting of 25 mm dia foundation bolts (600mm long) as per provision of structure including cost of reinforcement & shutting as per direction of Engineer in Charge (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
27Supply & Erection of built up overhead Cantileverstructure 6.00 M span comprising of one vertical post of 6.00 M high made up of 300 mm N.B. havey class M.S. pipe as vertical member welded with 10mm M.S. plate at top & bottom for bearing of horizantal frame comprising of 40 mm . N.B. made havey class main pipe as of 25 mm class medium N.B. pipe bracing as per approved designed drawing with one coat of steel primer and two coats of synthetic enamle paint complate the work includes construction of RCC fundation of size 750x750 mm & 1500 deep for built up Overhead Structure including earth work in excavation , 100 mm thick Lean Concrete in 1:4:8 cement , course sand and 40 mm gauge stone balllast , RCC with 1:2:4 cement , Course sand and 20 mm stone grit including supply of grouting of 25 mm dia foundation bolts (600mm long) as per provision of structure including cost of reinforcement & shutting as per direction of Engineer in Charge . (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
28Direction and Place Identification signs with size moretha 0.9 sqm size board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting . Sheet fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
29Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is excludive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes. (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
30Reflective Raised Pavement Markers (Road Studs/Cat Eye) Supply and Fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylic styrence Acrylonitrite) or HIPS (Hi- impact Polystyrene) of acrylonitrile butadiness styrence (ABS). The marker shall upported a load of 1335 kg tested in accordace with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prosmatic cubes of providing total internal reflection of the light entering the lens face Retro reflecting surface shall preferably be base and area of each retro-reflecting surface shall not be less than 13.00 sqcm road studs shall be legibly marked with name trade mark or other means of indenfification of the manufacturer. Dimensions of road studs should not be less than 100mmx100mmx10mm. (RPM (With shank) as per ASTM (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
31Supply & fixing of MS Delineator made of mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion the surface should be conceated so that there should not be any exposed surface without powder coating aaltematively these metal guide poles can be conceated with thermoplastic body. the posts shall have lan elipsoidal or circular design with the height of the pole shall be 800 to 900mm above the ground with about 200 to 300 mm base which can be anchored onto the ground Mild steel Guide poles shall conform to Type XI sheeting specifications as per IRC.67 and ASTM D4956 which would ensure to obtainl clear visbility of the road alignment during night time. the retro reflective sheeting shall be tested A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexbilty, liner removal adhesion impact resistance specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international government laboratory/ institute by the manufactuurer of the sheeting and in case the certificate is obtained from international condition it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad alternatively a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements form a reputed laboratory in india can be acceaped provisionally. in such a situation the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meening the requirement of three years outdoor weathering of the sheeting as per IRC 67-2012 & Proof ot the same report shall be uploaded which quoting tender. the rate shall include all materials labour T&P transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge.(Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
32Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 (Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
33Providing and Laying of Rubber moulded (Red colour) Interlocking Concrete Block Pavements having thickness 80 mm including leveling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504. SOR NS-1(Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
34Providing and Laying of Rubber moulded (Grey colour) Interlocking Concrete Block Pavements having thickness 80 mm including leveling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504. SOR NS-2(Including cost of all material and Labour, all taxes and labour Cess etc but Excluding Cost of GST)
35PART BMaintainance cost :- Maintainance cost will be paid year wise as per Government order No. 17/2024/SA.-113/23-1-2024-23-1099/113/2023 Date 16.01.2024 and HQ UPPWD,Lucknow order No. 3689COPRMC/Mul-23-24 Date 17.02.2024
36The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 1st Year Maintenance charge @ 0% of Sub toal of Part-A work done (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
37The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 2nd Year Maintenance charge @ 0.25% (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
38The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 3rd Year Maintenance charge @ 0.50% (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
39The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 4th Year Maintenance charge @ 0.75% (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )
40The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 5th Year Maintenance charge @ 1.00% (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST ) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58315111
AUTHORITY Government Departments
TENDER VALUE 23.40 Crore
LAST DATE 23-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Widening And Strengthening Work Of Shahganj Link Road (O.D.R.) Into 04 Lanes In District Jaunpur (Including 05 Years Maintenance)
Basic Detail
Tender No 5204/SETender/jnp-gzp circle/26 Date-13-10-2026
Bidding Type Tender
Location
City Jaunpur
State Uttar Pradesh
Key Dates
Publish Date 15 Nov 2026
Submission Date 23 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 23.40 Crore
Tender Fee 5590
EMD 35.10 Lakhs
Exemption Available
Document List
399246ca-f93b-4e91-8144-2a532f6b7d19.html
BOQ_2279348.xls
Corrigendum.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 17, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 23, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Nov 23, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

399246ca-f93b-4e91-8144-2a532f6b7d19.html

xls

BOQ_2279348.xls

pdf

Corrigendum.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender