Tender For Adding 2 No 33 Kv Saket Nagar And Dasaswamedh Bay At 220 Kv Sub Station Bhelupur Varanasi Under Electricity Transmission Division-I, Varanasi
Tender Overview
Project Description
Tender for Adding 2 No 33 Kv Saket Nagar And Dasaswamedh Bay At 220 Kv Sub Station Bhelupur Varanasi Under Electricity Transmission Division-I, Varanasi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Nov-2026 | Opening Dated Extended | Date | 25-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Laying of 40 mm dia MS round bar 0.9 Meter below ground level including cutting, bending, straightening, welding, and painting, excavation, back feeling & all other associated work to complete the job satisfactorily as per direction of Engineer in charge (M.S. round bar shall be provided by department). |
| 2 | Piercing of MS Electrode below 1200mm into the ground using hammer completely at all the junction points along with welding & painting at outer periphery of earth mat as per relevant IS. |
| 3 | Interconnection of the earth mat laid with the existing earth mat of the 220 KV S/S Bhelupur at specified point by welding as that complete earth mat acts in coherent manner to provide proper earthing of the substation. |
| 4 | Sorting counting shifting of GI/CI structure to loading point and loading on private vehicle at EFU Naini, Prayagraj. Safe Carriage of GI/CI structure(17 MT Approx.) from EFU Naini Prayagraj to 220 KV S/S Bhelupur (Approx. distance 140KM) through private vehicle to be provided by the contractor. Unloading of structure from vehicle, its sorting counting and proper stacking at the premises of 220 KV S/S Bhelupur at suitable place. (17 MT Approx.) |
| 5 | Erection of structure parts of Main & Auxiliary structure. The job consist to shifting of all material, structure parts, nut bolts washers etc from store to work site, erection of structure as per relevant drawing and practices. |
| 6 | Dismantling of old security fencing and horizontal angle pales, including gas cutting of stay and upright for extension of switchyard, including dismantling base of above ground level and shifting material at safe place. |
| 7 | Erection of pale fencing for switchyard by way of grouting vertical upsise at approx 3 mtr apart in pit size 350x350x370mm with 1:2:4 cement stone,blast and sand ratio and making platform then fixing of horizontal runner and pales with suitable size of nut bolt and washer including cost of men ,material and T&P but excluding cost of pale fencing and including tag welding of pale fencing all other associated work fencing include welding shifting the material to site etc. including cost of nut & Bolt. |
| 8 | Painting of Newly erected pale fencing by scratching,rubbing,with wire brush, cleaning applying one coat of red oxide primer and two coat of synthetic enamel paint of bus green color of standard quality. |
| 9 | Erection of following equipments including shifting from different storage location under this Division to 220KV SS Bhelupur erection site including all other associated works to complete the job satisfactorily. |
| 10 | 36 KV VCB |
| 11 | 36 KV CT |
| 12 | 36 KV CT Junction Box |
| 13 | 36 KV PT |
| 14 | 36 KV PT Junction Box |
| 15 | 36 KV LSI |
| 16 | 36 KV LSI Junction Box |
| 17 | 36 KV BSI |
| 18 | 36 KV BSI Junction Box |
| 19 | 33KV C&R Panel |
| 20 | Erection of 33 KV Main Bus bar of Double Moose conductor including stringing of bus bar with disc insulators cutting bending shifting and all other associated work for completion of work satisfactorily(1 Span= 6 mtr.) |
| 21 | Erection of 33 KV Transfer Bus bar of Single Moose conductor including stringing of bus bar with disc insulators cutting bending shifting and all other associated work for completion of work satisfactorily(1 Span= 6 mtr.) |
| 22 | Jumpering of following bay equipments with the help of Twin ACSR Panther/Moose conductor including cutting bending clamping with all other associated work from main bus to outgoing isolators for all phases. |
| 23 | Laying of following sizes of control cable in the cable trenches from C&R Panel to various type of equipments, junction boxes in switch yard as per cable schedule, its clamping/binding at every two meter distance with aluminium sticks 25x1mm size including carriage of cable drums from store to laying site and shifting back to store and all other associated work to complete the job satisfactorily as per tech. specification: |
| 24 | 2x2.5mm²Control Cable |
| 25 | 4x2.5mm²Control Cable |
| 26 | 6x2.5mm²Control Cable |
| 27 | Termination of following size of cable as laid above as per cable schedule including making necessary holes in glands plate or boxes where ever required. Supply and fixing of cable glands of appropriate size. Supply and providing ferrules and No. for each core of cable and its termination with crimping type lugs of Dowell/Tension and all other associated work to complete the job satisfactorily as per tech. specification: |
| 28 | 2x2.5mm²Control Cable |
| 29 | 4x2.5mm²Control Cable |
| 30 | 6x2.5mm²Control Cable |
| 31 | Cutting straitening bending laying of 75x10 mm MS flat for earthing of main structures including welding with main earth mat below 500-700 mm of ground level with object to earth excavation of trenches its back filling, painting with one coat of red oxide primer and two coats of synthetic enameled green colour with all cost of Paint, T&P required for completion of work. |
| 32 | Cutting straitening bending laying of 50x6 mm MS flat for earthing of main structures including welding with main earth mat below 500-700 mm of ground level with object to earth excavation of trenches its back filling, painting with one coat of red oxide primer and two coats of synthetic enameled green colour with all cost of Paint, T&P required for completion of work. |
| 33 | Earthing of trench alongwith 25x6mm MS flat after cutting and welding with cable rack and trench with all cost of MS flat, including painting with one coat of red oxide primer and two coats of synthetic enamelled paint. with all cost of Paint, T&P required for completion of work. |
| 34 | Laying of 6 no. 36 KV XLPE Power cable of size 1Cx630 Sq mm, below 1000mm from the ground level including excavation of trench and laying cable and putting 1st class bricks on its 75mm edge along with cable on both side. Filling the same with Ganga sand and then putting patiya to cover the trench and then filling with earth including cost of bricks, sand, patiya miscallaneous and all other associated work to complete the job satisfactorily. |
| 35 | Hoisting of 36KV 1Cx630 sq mm cable on pole/structure through G.I Pipe of size 6''(150mm) dia, 3 meter long including it's jumpering with the help of suitable size of alluminium lugs. |
| 36 | Termination and Jointing of above power cable by 1Cx630 Sq mm cable jointing kit O/D type and all other associated works to complete the work satisfactorily as per techenical specification. |
| 37 | Fabrication,fixing and fitting of cable structure in shape of H- pole,3 meter long including it's grouting with RCC of size 150*150*150mm in ratio 1:4:8 including all men & material except structure/angle. |
| 38 | Fabrication of display board made of M.S. angle iron 50x50x6mm, 3 long support and M.S. board of 2'x1' M.S. sheet 18 gauge and M.S. flat iron 25x6mm size 2'x1' welded on M.S. sheet after then M.S. pipe of 1.5\\" dia. fitted around M.S. flat on the sheet board and 0.5\\" dia M.S. pipe 4\\" long welded in M.S. angle iron from two places at one side and two at other to complete the display board. Digging pit size 2'x2'x3' and grouting above board with 1:2:4 cement, ballast, sand ratio and making plinth of size 1'x2'. Board shall duly painted by yellow color and equipment name shall be written in black. |
| 39 | Supply |
| 40 | Supply & fixing of 250W outdoor type LED flood light complete fitting with all fixing accessories including bracket and clamps of Philips/Crompton/Havells/Bajaj/Halonix make. Original warranty card should also be submitted along with above material. |
| 41 | Double Tension type gun fitting suitable for 70kN disc insulator complete with all accessories suitable for Moose conductor. |
| 42 | Single Tension type gun fitting suitable for 70kN disc insulator complete with all accessories suitable for Moose conductor. |
| 43 | PG clamp Moose to Panther made of LM-6 alloy four bolted type complete with good quality nut bolt washer and spring washer exactly as per sample in ready to use condition. |
| 44 | PG clamp Panther to Panther made of LM-6 alloy four bolted type complete with good quality nut bolt washer and spring washer exactly as per sample in ready to use condition. |
| 45 | Alluminium Alloy Trefoil Clamp as per sample/Technical specification. |
| 46 | Supply of GI Nut bolt of Size 16x40mm |
| 47 | Supply of GI Nut bolt of Size 16x45mm |
| 48 | Supply of GI Nut bolt of Size 16x50mm |
| 49 | Supply of Spring Washer Size 16x3.5mm |
| 50 | GI Perforated Cable Tray 225 MM |
| 51 | GI Perforated Cable Tray 75 MM |
| 52 | 36kV, 1Cx630mm2, XLPE copper conductor power Cable as per Technical Specification. |
| 53 | 36kV, Terminal Kit for 1x630mm2, XLPE copper Cable (outdoor type) as per Technical Specification. |
| 54 | MS Electrode (3 meter x40mm) |
| 55 | MS Flate Size 75x10 mm |
| 56 | MS Flate Size 50x6 mm |
| 57 | MS Flate Size 25x6 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender