Tender For Repair/ Renovation Of Single Storied 02 No Lsq Block Faqmily Quarters And Double Storyed 01 No Usq Block Family Quarters At Police Station Mandi Poonch Under Account Head Minor Civil And Electrical Works In Demand-51 (Police)
Tender Value
42.14 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
3 days left
EMD
84280
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Renovation Of Single Storied 02 No Lsq Block Faqmily Quarters And Double Storyed 01 No Usq Block Family Quarters At Police Station Mandi Poonch Under Account Head Minor Civil And Electrical Works In Demand-51 (Police)
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 2 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 3 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 5 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick |
| 6 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 7 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 9 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 10 | Finishing walls with Acrylic smooth exterior paint of required shade Old work (one or more coats applied @ 0.90 liters/ 10sqm) |
| 11 | Engagement of labour skilled/ unskilled for various dismantling works like tacking of floors, damaged tiles, etc including stacking of serviceable material as directed by EIC and disposal of unserviceable material up to 50 mtr lead. |
| 12 | Labour |
| 13 | Carpenter |
| 14 | Plumber |
| 15 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class Kail wood |
| 16 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class Kail wood |
| 17 | Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 18 | Providing and fixing of wardrobe of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality including back covering of 6mm thick water proof ply and fixing 1mm thick mica of approved colour and make over the frame and shutter, as around including cost of all fixtures i.e. glazing, locking arrangements, handle etc. as per the directions of site Engineer. (complete Job) |
| 19 | Providing / fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C. P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge (including glazing and paneling)for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required including all fittings complete 14 guage |
| 20 | Providing and fixing of C P fittings of approved brand and manufacture including cost and carraige of mmaterial complete Job as directed by EIC. |
| 21 | C P Angle valve |
| 22 | PVC Connection |
| 23 | Waste pipe |
| 24 | C P Bib cock long nose |
| 25 | C P Bib cock short body |
| 26 | Waste coupling |
| 27 | C P Grating |
| 28 | Soap Dish |
| 29 | C P Shower with Arm |
| 30 | C P Towel Rod |
| 31 | C P Towel Ring |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25mm nominal outer dia pipes |
| 33 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 34 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 35 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 36 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 37 | Providing and fixing of C P Wall mixer of approved brand and manufacture (Jaquar, Kerovit, Hindware or equivqlent make) as directed by EIC |
| 38 | Providing and fixing of C P Central Hole Basin mixer of approved brand and manufacture (Jaquar, Kerovit, Hindware or equivqlent make) as directed by EIC |
| 39 | Providing and fixing of C P Sink mixer of approved brand and manufacture (Jaquar, Kerovit, Hindware or equivqlent make) as directed by EIC |
| 40 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the wallswherever required Kitchen sink without drain board 470x420mm bowl depth 178mm |
| 41 | Providing and fixing of 25 liter water heater Geyser of approved make like Venus, Jupiton, Racold or equivalent make including all necessary fittings complete |
| 42 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre |
| 43 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes 75 mm diametre |
| 44 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) |
| 45 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite Work |
| 46 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 47 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 48 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of G.S. Sheet |
| 49 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 50 | Providing and fixing 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) |
| 51 | Providing and fixing plained eaves boarding 2nd class kail wood 300x40 mm (nominal size) |
| 52 | Providing hoisting and fixing trusses/purlins /rafters/ posts/ post-plates or like components including cost of screws etc. complete Second class Kail wood |
| 53 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 54 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 55 | Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 56 | Carriage of material by mechanical transport including all loading / unloading complete |
| 57 | Sand Aveg. lead of 200 Km |
| 58 | Providing and fixing of following types of switches, sockets, allied accessories including dismantling of existing switches and sockets with terminations as required Anchor/Legrand/GM/Crabtree or equivalent make |
| 59 | 16A switch only piano type |
| 60 | 16A socket only piano type |
| 61 | 6A switch only piano type |
| 62 | 6A socket only piano type |
| 63 | 6A switch socket combine with gang box piano type |
| 64 | 16A switch socket combine with gang box piano type |
| 65 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ medium class PVC conduit as required Finolex/Polycab/Anchor/V-Guard/Havells/RR kabel or equivalent make |
| 66 | 2 x 1.5 Sqmm |
| 67 | 2 x 2.5 Sqmm |
| 68 | 2x4 Sqmm |
| 69 | Providing and fixing of following MCB distribution boxes double door with inbuilt tinned copper heavy duty bus bars for earth, earth, and jumpers of proper current rattings Havells/Anchor/SSK/legrand/hager/indoasian make. |
| 70 | 12 way |
| 71 | Providing and fixing of following type of MCB's/switch gear of L&T/Havells/Anchor/ Schnedier/indoasian Opti-Pro/Legrand of 10 KA or more capacity series including testing and necessary terminations. |
| 72 | 63 A SPN |
| 73 | 6A-32A MCB's |
| 74 | Providing and fixing of LED lights of following type Crompton/Phillips/Orient/Havells/Syska make including necessary terminations as required. |
| 75 | T-5 LED 4' long 20 watt |
| 76 | 9 Watt LED Lamps |
| 77 | Providing and fixing of piano type fan dimmers of Anchor/Legrand/GM/Crabtree or equivalent make. |
| 78 | Providing and fixing of 48\\" Sweep ceiling fan with allied accessories complete including necessary terminations crompton/ Havells/Orient/Usha Make. |
| 79 | Providing and laying of 2 core 16 sq.mm aluminium armoured cable along with pin type thimbles and connectors to be laid from source to pannel/mcb box including routing underground in HDPE pipe and to be fixed on walls etc via clamps, saddles etc including terminations as required. |
| 80 | Providing and fixing of Angle/straight holders including terminations GM/Havells/Krant /Anchor/Great white make |
| 81 | Providing and fixing of Phenolic sheets of desired shapes and sizes incluting cutting, finishing, drilling etc. |
| 82 | Providing and fixing of exhaust 200/250mm including terminations as required Crompton/Havells/Orient make |
| 83 | Providing and fixing of following sizes of PVC battens along the wall or ceiling including dismantling of existing damaged battens. |
| 84 | 1\\" wide surface batten 2 meter long Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender