Tender For Fabrication, Installation And Commissioning Of Customized Portable/Relocatable Cabin For Toilet & Changing Room At Jolly Buoy Island Under Wildlife Division, Haddo During 2026-27
Tender Value
12.56 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
23 days left
EMD
25127
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fabrication, Installation And Commissioning Of Customized Portable/Relocatable Cabin For Toilet & Changing Room At Jolly Buoy Island Under Wildlife Division, Haddo During 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Portable Container House for Toilet & Changing Room- Technical SpecificationDesign, Engineering, Supply, Fabrication, Installation and Commissioning of a Customized Portable/Relocatable Toilet and Changing Room Facility of approximately 450–500 sq. ft. built-up area for tourist/public-use locations, comprising suitably planned Male and Female toilets, changing rooms, wash areas and associated utility spaces, including a structural roof shed with colour-coated PPMS/GI metal sheets and suitable structural members. The scope shall include all necessary sanitary fixtures, wash basins, showers, plumbing, water supply and drainage systems, electrical wiring and fittings, lighting, ventilation/exhaust fans, doors, ventilators/louvers, partitions, flooring, wall finishes, waterproofing, fixtures, fittings and accessories, including transportation, loading/unloading, positioning, anchoring, erection, installation, testing, commissioning and finishing, complete in all respects for all-weather, durable, hygienic and ready-to-use facilities as per the approved design, technical specifications, applicable codes/standards and directions of the Engineer-in-Charge. |
| 2 | Bottom frame 150×75×5 mm MS/GI C-channelBottom stiffeners 100×50×4 mm channels and 80×40×3 mm MS/GI tubular membersFloor frame 100×50×3 mm primary and 80×40×3 mm secondary floor membersTop frame 80×40×3 mm MS/GI top perimeterRoof stiffeners 60×40×2.5 mm rafters and 50×50×2.5 mm purlinsCorner posts / walls 60×60×3 mm corner posts and 50×50×3 mm intermediate postsWelding & fabrication Welded MS/GI fabrication with cleaned joints, safe edges, dimensional inspection and coating touch-up before panel closure and dispatch.Walls, Roof, Floor & InsulationExterior walls 1.5mm – Plain MS/GI sheetRoof 1.6 mm corrugated MS/GI sheetInterior walls 8 mm pre-laminated board throughoutCeiling PVC ceiling panelsFloor base 19 mm marine-grade plywood or 18 mm Bison panelFloor finish 2 mm vinyl sheet flooringWall insulation 50 mm glass wool or mineral woolRoof insulation 50 mm glass wool or mineral woolDecorative / external finish standard anti-rust enamel in two standard coloursFasteners & sealing Security grill, insect mesh, guard, louver or protection selected only where the approved use and opening schedule requires it.Toilet Western Toilet With complete accessories & Exaust Vent with all Plumbing FixturesChanging Room Bath Shower with complete accessories & Exaust Vent with all Plumbing FixturesWash Area Wash Basin with complete accessories Water Storage Tank 1000 Ltr Water Storage tank over pre-fabricated structure of 5 mtrs. height (as per drawing) with FRP materials and with all plumbing fixturesDoors, Windows, Electrical & ServicesVentilation ventilation/exhaust fansElectrical wiring Concealed PVC-insulated copper wiring, typically 1.5 sq.mm lighting, 2.5 sq.mm sockets and 4 sq.mm higher-load or AC circuits, subject to the final load schedule along with supply, installation, testing and commissioning of a 0.5 HP solar-powered water pump suitable for salt-water pumping, including solar panel, controller, mounting/support structure, cables, piping, valves, connections and all accessories required for complete and satisfactory operation.Electrical protection Distribution board with MCB/RCCB protection, earthing and segregation of lighting, socket, wet-area and AC circuits according to the approved electrical drawing.Electrical fittings essential LED, fan and 6A/16A socket set to the single planPlumbing / sanitary Standerd toilet work will provide on cabinLayout / configuration o ne efficient fixed room plan per size, options quoted separately if requiredPainting / coating one red-oxide primer coat with two standard enamel coatsQuality checks Pre-dispatch checks cover dimensions, member and sheet identification, welds, coating, roof drainage, weather sealing, doors, windows, electrical continuity and functional operation.Warranty 5-year structural warranty and 1-year finishing warranty as standard; Typical service life is 20 to 25 years under proper use and maintenance, which is an engineering expectation, not a warranty period |
| 3 | 20 ft x12 ft (240 Sqft) Toilet area |
| 4 | 5 ft x 5 ft (25 Sqft) over head tank structure upto a height of 5 Mtr. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender