Tender For special Repair To Pathway Lights And Garden Lights At Vip Gate And Officer Mess Area And Certain Revenue Work Under Cijw School Vairengte
Tender Value
39.20 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
20 days left
EMD
78400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolasib → Mizoram
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Pathway Lights And Garden Lights At Vip Gate And Officer Mess Area And Certain Revenue Work Under Cijw School Vairengte
BOQ
| Sl. No. | Item Description |
| 1 | B & R Division Items |
| 2 | Rough excavation over areas not exceeding 1.5m deep and getting out soft/ loose type of soil complete all as specified and directed. |
| 3 | Excavating in trenches, n exc 1.50 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/ loose type of soil complete all as specified and directed. |
| 4 | Returning, filling in trenches including spreading, leveling watering and ramming in layers not exceeding 25cm all as specified. |
| 5 | Removing of surplus soil not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point all as specified. |
| 6 | M&L for Hardcore broken stone of gauge exc 40mm and n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 7 | M&L for PCC (1:4:8), Type D2 using 40 mm graded stone aggregate as in foundations, sub-base,filling and mass concrete complete all as specified. |
| 8 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 using (40mm graded stone aggregate) as in Sub base of floor rough surface for receiving tile complete all as specified. |
| 9 | M & L for plain cement concrete (1:2:4) type B1 using 20mm graded aggreagate as in lintels upto 1.50m clear span, bed blocks, coping , cills, steps, kneelers, bed plates, apex stones kerbs and similar works including necessary formwork complete all as specified and directed. |
| 10 | Material and labour for 40 mm thick Plain Cement concrete type B2 1:2:4 (40mm graded crushed stone aggregates) for flooring etc using in alternate 4mm thick plastic dividing strips, surface finish with steel trawel without using extra cement complete layer all as specified and directed. |
| 11 | Material and labour for 3.0 mm thick, 38mm wide glass dividing strip use in PCC flooring complete layer all as specified and directed. |
| 12 | M&L for Walling of random rubble ,coursed in retainning walls,abutments and similar works regular coursed,well bonded,bedded and solidly hearted,built in cement mortar(1:6) with lime/sand stone and PCC (1:3:6) type C1 precast bond stone (in lieu of stone bond stone ) set in cement mortar (1:4) brought upto courses Complete all as specified and directed Note :- (i) Precast PCC Bond stone shall be measured and paid separately against Item no 7(ii) RR Masonary will be measured after deducting PCC Bond stone |
| 13 | M & L for precast PCC (1:3:6) type C1 using 20 mm graded stone aggregates) as bond stone use for retainning wall, abutment and similar works and set in cement mortar 1:4 including neceessary formwork Complete all as specified and directed |
| 14 | M&L for raised pointing to random rubble, coursed or uncoursed in CM (1:3) complete all as specified and directed |
| 15 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished flat surfaces of concrete complete all as specified and as directed. |
| 16 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete all as specified and directed. |
| 17 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 18 | Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and directed. |
| 19 | Material and labour for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in foundation including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and directed. |
| 20 | Material and labour for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in column, pillars, piers, posts, and struts complete all as specified and directed. |
| 21 | Material and labour for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5m complete all as specified and directed. |
| 22 | Material and labour for Reinforced Cement Concrete M-25 (design mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roof landing balconies, canopies, deck slab and shelves and like complete all as specified and directed. |
| 23 | M & L for Mild steel TMT bars 10mm dia and over, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 24 | M & L for Mild steel TMT bars 6mm to 8mm dia and over, cut to length bend to shape as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 25 | M & L for Mild Steel TMT Bar 6mm dia and over up to 10 mm dia as in stirrups, spacers and binders as required including cranking, hooking etc and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 26 | M & L for brickwork with subclass 'B' or locally available best quality old size bricks, straight or curved on plan exc 6 m mean raduis, built in CM (1:6) complete all as specified and directed. |
| 27 | M & L for brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks in half brick thick wall complete all as specified . |
| 28 | M & L for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified. |
| 29 | M & L rendering 15 mm thick cement mortar (1:4) on fair faces of brick wall or concrete surfaces, in two layer each of 10+5 mm thick & water proofing compound mixed with second layer @ 3% finished fair and even complete all as specified. (Note :WPC measured separately). |
| 30 | M&L for 20 mm thick screed bed of cement mortar 1:6 for laying floor finishes complete all as specified. |
| 31 | Supply only integral water proofing compound WPC complete all as specified. |
| 32 | M & L Non Skid ceramic tiles coloured 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick screed bed or bedding layers in cement mortar 1:6 over brushing with neat cement slurry complete all as specified. |
| 33 | M & L Glazed ceramic coloured tiles size 450mm X 300mm X & ( 6mm to 7mm )mm thick set in vertical surface as skirting/ dado and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick screed bed or backing coat in cement mortar 1:4 laying of skirting/dado on walls all as specified and directed. |
| 34 | M&L for 18-20mm thick granite stone slab, of any type, table rubbed and polished, in steps, jambs, pillars, window cills, cooking platforms and the like in laid over and including 15mm thick screed in cement mortar (1:4) (rate shall be included) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed. |
| 35 | M&L reflective type rubber moulded chequered coloured cement concrete tile size 300mm X 300mm X 25mm thick, in floors, set, jointed & pointed with neat cement slurry with painted to match colour of tile laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed. |
| 36 | Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated/trepozoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 37 | Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 38 | Supply and fix Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 39 | Supply and fix structural steel work in tubular/hollow sections trusses , Purlin , posts, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as as specified and directed. |
| 40 | S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , smooth finish with lipping of teak wood on edges all as specified and directed. |
| 41 | Supply and fix 2 track way sliding anodized aluminium glazed ventilator shutter with frame consists of following specification all as specified & directed.(a) Ventilator frame 2/3 track of size 60mm × 25mm × 1.5mm thick.(b) Stiles and rails of size 35mm × 25mm × 1.5mm.(c) 35mm × 35mm × 1.5mm T section mullion.(d) PVC gasket with 4mm thick tinted glass, incl. aluminium handles with necessary locking arrangement.Note: Measurement to be taken as overall width and height of ventilator. No shutter or frame to be measured separately. All necessary accessories including tinted glass required for assembling and fixing window at proper place complete are deemed to be inclusive. |
| 42 | S&F 100mm long SS Butt hinges (ISI marked) with SS screws complete all as specified. |
| 43 | Supply and fix 150 mm long aluminium handles cast type anodised complete all as specified & directed . |
| 44 | Supply and fix 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 45 | Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified. |
| 46 | Supply and fix as 15 mm bore bib taps fancy type, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all specified and directed. |
| 47 | Supply and fix 110mm bore PVC (SWR) pipes single socketed with rubber joint, in any length, laid in trenches or in floors / fixed to walls complete all as specified. |
| 48 | Supply and fix 75mm bore PVC (SWR) pipes single socketed with rubber joint, in any length fixed to walls / floors or in trenches complete all as specified. |
| 49 | Supply & Fixed 75mm bore PVC (SWR) bends with access door suitable for pipe complete all as specified. |
| 50 | S&F 15mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed. |
| 51 | S&F 20mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed. |
| 52 | M & L for preparation of new or previously untreated wall surfaces and applying three coats of white wash complete all as specified and directed. |
| 53 | Material and labour for applying two coats of cement base paint over one coat of primer on plastered surfaces of walls including preparation of new or previously untreated surfaces all as specified and directed |
| 54 | M & L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 55 | M & L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 56 | E & M Division items |
| 57 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty,concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one switch. |
| 58 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One fan point/exhaust fan point controlled by one, one way switch 5 Amp. |
| 59 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, concealed PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on the same board. |
| 60 | M & L for point wiring with FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One 3 pin 5 Amp socket outlet point controlled by one switch on independent board. |
| 61 | M & L for point wiring with FRLSH stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated cable 1100 volts grade, ISI-694 marked in and including heavy duty, PVC Conduit including all accessories etc ISI marked, with GI sunken box suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for 3 pin, 15 Amp socket outlet, independent |
| 62 | S&F switch piano flush type button single pole one way 5 Amps all as specified and directed. |
| 63 | S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed. |
| 64 | S&F switch socket combination 5 in 1 5/16 Amp flush type with all as specified and directed. |
| 65 | S&F ceiling rose surface bakelite with three terminals all as specified and directed |
| 66 | M&L Sub main wiring with single core FRLS PVC insulated and unsheathed multistranded, FRLS copper conductor cable 1100 volts grade drawn through and including 20 mm size of PVC conduit concealed in wall accessories and fittings on wall INCL Taking down old unserviceable sub main wiring any type complete all as specified and directed by EIC.Note:- (a) Cable required for connection to DBs shall deemed to be including and shall not be measured separately. Earth wire shall run inside the conduit. (b) 02 runs 2.5 sqmm conductor cable and 01 run of 2.5 sqmm as earth continuity conductor. |
| 67 | Supply & Fix LED betten plastic type fitting of capacity 20W, wall mounted, operating on 230V, 50Hz, AC Supply having luminous efficiancy not less than 125 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long with decorative end caps elegently designed complete all as specified. Make : Cat Part No LDLL20-WW of crompton or equivalent of make |
| 68 | Supply and fixing LED light fitting 1X9W/1X10W bulkhead luminaires including LED light driver holder connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 69 | Supply & Fix 25 watt enviromental friendly bldg security street light, LED luminaire made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr-in–charge. |
| 70 | Supply and fix LED Post top 45 Watt 230V for garden heritage site IP-65 heavy unique ring shape landscape duty Die cast aluminium alloy for optimal heat and rust prevention Anti Corrosion powder coated typically black surge protection symmetrical light distribution with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and all accessories complete including taking down old unserviceable light fitting complete all as specified and directed by EIC. Make: Havells Cat No. SIMBOLPT45WLED75SYMPGCRYMP. |
| 71 | Supply and fix LED Step light 6 Watt outdoor type 230 V IP-65 dust light and protected form heavy range complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and all accessories complete including taking down old unserviceable light fitting complete all as specified and directed by EIC. |
| 72 | Supply and fix LED bollard light 10 Watt tripod type with soft 360 degree light distribution type 230 V complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and all accessories complete including taking down old unserviceable light fitting complete all as specified and directed by EIC. |
| 73 | S&F plastic body exhaust fan 250mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces complete all as specified and as directed |
| 74 | Supply and fix Hot press moulded SMC junction box IP 65 with double door hinged plain walls of size 325x220x150mm including 6A MCB SPN or terminal as site including making suitable size hole for cable entry complete with cable terminals/connectors and other fittings fixed on poles/wall with MS flat iron nut bolts, washers and double compressor metal glands of suitable sizes etc complete including taking down old unserviceable one complete all as specified and directed by EIC. |
| 75 | S&F factory made distribution board sheet metal enclosure powder coated single phase neutral (SPN) 4 way double door with Aluminum bus bar 100 Amp for fixing of MCBs including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed. |
| 76 | S&F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 77 | S&F MCB SP of capacity 5-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 78 | M & L for building earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron earth lead by means of bolt, nut, check nut and washer of galvanised iron strips 20x4 as earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in hard/dence soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggregate, funnel, 20mm dia GI medium grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alternative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not exceeding 50m, complete testing on completion all complete as shown in electrical plate No 3 of SSR Part I 2009 complete all as specified and directed by EIC. |
| 79 | S&F in replacement, of PVC cable 2.5 sqmm 3 core, 230V grade insulated type as per specification complete all as specified and directed. |
| 80 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts grade, cross sectional area 10 sqmm 4.0 core laid in trenches/fixed to wall/under road/pipe etc with copper cable glands & copper thimbles complete all as specified and directed. |
| 81 | Taking down old unserviceable and Supply, laying and testing in trenches or fixing on wall or passing through pipe cross sectional area 16 Sq mm 4 core 1100 volts grade heavy duty cable XLPE Insulated multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and over PVC sheathed, properly clamps on wall and connection at end point with all legs, glands etc complete all as specified and directed by EIC. |
| 82 | Taking down old unserviceable and Supply, laying and testing in trenches or fixing on wall or passing through pipe cross sectional area 25 Sq mm 4 core 1100 volts grade heavy duty cable XLPE Insulated multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and over PVC sheathed, properly clamps on wall and connection at end point with all legs, glands etc complete all as specified and directed by EIC. |
| 83 | Taking down old unserviceable light fitting and Supply & laying, tubes, 32mm medium grade, galvanised iron water tubes with screwed socket joint together with and including all GI fittings connection on wall or floor with clamps digging etc complete all as specified and directed by EIC. |
| 84 | M & L for cutting existing road / hard standing for laying GI pipe not exc 45cmX45cm in wide and depth getting out execavated material incl returning filling wth well ramming watering, removal of surplus soil and cutting road filling from 150 mm thick PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate complete all as specified and directed. |
| 85 | Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth for taking out and laying pipe lines not exceeding 10 Sqm on plan and getting out, excavated earth, forming bottom surfaces to required level complete all as specified and directed by Engr-in-Charge. |
| 86 | Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified and directed. |
| 87 | Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 88 | Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed. Note:- Depth of sand cushioning will be measured after punning down. |
| 89 | M & L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed by Engr-in-Charge. |
| 90 | M&L for Plain cement concrete PCC (1:4:8) Type D1 (20mm graded aggregate) use in foundations for brick pillar for supporting GI/DI pipe including Demolition of cement concrete existing complete all as specified and directed. |
| 91 | M & L for preparation of surface of old painted steel surface by scrapping method and applying two coats of synthetic/deco enamel paint complete as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender