Tender For Repair/Maint Of Internal Electrification Fittings, Fixtures At Rms Dholpur Under Ge Bharatpur
Tender Value
40 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bharatpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Internal Electrification Fittings, Fixtures At Rms Dholpur Under Ge Bharatpur
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting & taking down the ceiling fan of 1200mm/1400mm sweep, cleaning the dust etc with air pressure, cotton cloth & brush, cleaning with kerosine oil, lubricating greasing, oiling, cleaning to winding including supply and replacement of nuts, bolts, hanging clamp, rubber seal, split pin,capacitor connector and copper cable PVC size 3 core 0.5 Sqmm upto required lenght from ceiling rose to connector of ceiling fan including hanging, connecting up and testing complete all as specified.Note : Parts/components replaced other than mentioned above will be measured and paid separately under respective items. (ii) After completion of work all fans/geysers shall be tested in E/M store yard to the entire satisfaction of Engr-in-charge |
| 2 | M&L for painting of ceiling fan of any sweep complete with blades, down rod etc with synthetic enamel paint of approved colour by spraying including filling cavaties with filler, preparation of surfaces cleaning all dust etc and writing of MES No of size not exc 5cm thick using black enamelled paint complete all as specified. |
| 3 | M&L for cutting and dismantling the existing winding of ceiling fan of 1200mm sweep and rewinding with super enamelled copper winding wire of suitable gauge including varnishing, lubricating, greasing, oiling and testing complete,including replacing of all bearing in a fan as per existing size and hanging clamp complete all as specified. |
| 4 | Supply and replacement of ceiling fan blade suitable for ceiling fan 1200mm sweep (set of three blades) complete all as specified. |
| 5 | Supply and replacement of down rod 50cm long 15mm internal dia heavy duty duly painted including hanging clamp, rubber ring, nut and bolts complete suitable for ceiling fan of 1200/1400mm sweep.including necessary hole complete all as specified. |
| 6 | Supply and replacement of canopy suitable for ceiling fan of 1200/1400mm sweep complete all as specified. |
| 7 | Supply and replacement Capacitor 2.5/3 mfd, oil filled, 400V AC, 50 HZ, ISI marked complete all as specified. Make : Asian/Unistar/Usha/Amcap |
| 8 | Supply and replacement ball bearing suitable for existing ceiling fan of size 1200mm/1400mm sweep complete all as specified. |
| 9 | Supply and fixing in replacement PCB circuit for BLDC fan of 1200mm sweep as per existing make complete all as specified. |
| 10 | Supply only remote along with two batteries suitable for existing BLDC fans complete all as specified. |
| 11 | M&L for cutting and dismantling the existing winding of exhaust fan 300mm sweep and rewinding with super enamelled copper winding wire of suitable gauge including varnishing, lubricating, greasing oiling testing complete including gun bush sutiable for exhausr fan complete all as specified. |
| 12 | All as per item No 11 above but for exhaust fan 380/450mm sweep complete all as specified. |
| 13 | Supply and replacement of following parts/components suitable for exhaust fan 300/380/450mm sweep :- |
| 14 | (a) Capacitor 4 mfd, oil filled, 400V AC, 50 HZ, 850C ISI marked complete all as specified.Make : Asian/Unistar/Usha. |
| 15 | (b) Fan blade set (set of three) for exhaust fan of 300mm sweep complete all as specified. |
| 16 | (c) Fan blade set (set of three) for exhaust fan of 380/450mm sweep complete all as specified. |
| 17 | (d) Supply and fix in replacement of Exhaust fan outsied wire mesh for protection to exhaust fan all as specified and as per existing size complete all as specified. |
| 18 | M&L for cutting and dismantling the existing winding of wall mounting fan 400mm sweep with super enamelled copper winding wire of suitable gauge including varnishing, lubricating, greasing oiling testing complete including gun bush sutiable for exhaust fan complete all as specified. |
| 19 | S&F in replacement Heating element 1500/2000W with rubber ring clamping screws etc in geyser water storage type of capacity 25/35 ltr/50 ltr complete all as specified.Make : Bajaj/Venus/Theeta/Micron/Havells. |
| 20 | Supply and replacement following parts required for repair of the geyser water storage type 25 ltr capacity. Make : Ditz/Recold/Venus/Sidhson/ Bathwall/Bajaj. |
| 21 | (a) Thermostat switch adjustable type as per existing complete all as specified. |
| 22 | (b) Reset type thermal cut out complete all as specified. |
| 23 | (c) Brass inlet/outlet assembly complete without element and thermostat complete all as specified. |
| 24 | (d) Indicator bulb square type complete with necessary connection wire of red & green colour complete all as specified. |
| 25 | (e ) Brass NRV 15mm bore suitable for 25/35/50 Ltrs Geyser complete all as specified. |
| 26 | M&L for removing unserviceable grouted \\"Anchor\\" type bolts and nuts from the wall and S&F new \\"Anchor\\" type bolts (04 Nos of 12mm dia) including fastener grouted properly in wall to hold 25/35/50 ltr capacity water storage type geyser with and including nuts and washers and marking good the disturbed surface in cement mortar 1:3 complete all as directed by Engr-in-charge. |
| 27 | S&F in repair PVC connection 15mm dia, 45cm long with PTMT coupling complete all as specified. |
| 28 | Supply and fix bibcock , brass chromium plated screwed down for size 15mm dia pipe complete all as specified. |
| 29 | Supply and fix stop core brass chromium plated screwd down for 15mm dia pipe complete all as specified. |
| 30 | S&F Water storage tank suitable for 25/35/50ltrs geyser made out of special laminated texture finished body with covering of non corrosive protection on both sides of sheet with 100% pure Salem stainless steel sheet/electro statically powder coated body made of heavy gauge CRCA sheet complete all as specified. |
| 31 | Taking up or down the existing unserviceable GI steel tubing and connection and S&F new M&L pipe galvanized iron medium grade ISI marked complete with all fittings and fixed complete to walls ,and ceiling or laid in floors, jointed tested and commissioned complete following sizes, |
| 32 | (a) 15mm |
| 33 | (b) 20mm |
| 34 | S&F in repair PVC cable 3 core copper conductor of size 2.5 Sqmm for water storage type geyser of capacity 25/35/50 ltr including taking out old cable complete all as specified. |
| 35 | Taking down U/S plug top and S&F new 3 pin plug top 16 amps, 230 volts, ISI marked complete all as specified. Make : Anchor/Kinjal/cona/Recold/Leader. |
| 36 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of wall, floor & ceiling etc complete all as specified. |
| 37 | M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in and including PVC casing and caping double locked box type with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size of PVC boards for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete all as specified for the following :- |
| 38 | (a) One light point controlled by one way switch complete all as specified. |
| 39 | (c) One bell/buzzer point controlled by one push button complete all as specified. |
| 40 | (d) One 3 pin 6 Amp socket point outlet on the same board with other switches complete all as specified. |
| 41 | (e) One 3 pin 6 Amp socket point outlet on the independent board complete all as specified. |
| 42 | All as per item No 27 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified. |
| 43 | S&F socket outlet 2 in 1, 5pin, 6 Amps multi purpose flush type 230 volt complete all as specified. |
| 44 | S&F socket outlet 2 in 1, 16 Amp flush type multi purpose 230 volt complete all as specified. |
| 45 | S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified. |
| 46 | S&F switch piano flush button single pole one way 16 Amps 230 volt grade complete all as specified. |
| 47 | S&F bell push flush type 5 Amps 230 volts grade complete all as specified. |
| 48 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required. |
| 49 | M&L point wiring concealed type complete including cutting chases for conduit pipes on stone masonry wall with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in pvc conduit pipes with accessories such as Tee, bend, collar, elbow, square junction box etc fixed inside the wall/ceiling by means of pvc conduit pipes and suitable accessories including suitable size of PVC boards/existing sunken box with modular boards for mounting fittings like switches, sockets, fan regulator etc including 1.5 Sqmm insulated but unsheathed copper earth continuity conductor to common earth and connedcted to earth dolly complete rate including cutting chases and finishing the wall after concealing the pipe with suitable plastering/putty/distembering etc all as specified and directed for the following :- |
| 50 | (a) One light point controlled by one way switch. |
| 51 | (b) One ceiling fan/exhaust fan point controlled by one way switch. |
| 52 | (c) One 3 pin or 5 pin 6 Amp socket point outlet on the same board with other switches |
| 53 | (d) One 3 pin or 5 pin 6 Amp socket point outlet on the independent board |
| 54 | All as per item No 34 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps socket point outlet on independent board including 1.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified. |
| 55 | S&F modular switch 1 way , 6 Amp, 1 module, as per existing model and type complete all as specified. |
| 56 | S&F in repair modular switch 1 way , 16Amp, 1 module, as per existing model and type complete all as specified. |
| 57 | S&F modular socket on existing plate, 6Amp, 2/3 pin combined, 2 module as per existing type and model complete all as specified. |
| 58 | S&F modular socket on existing plate, 6Amp/16Amp combination, 2/3 pin combined, 2 module as per existing type and model complete all as specified. |
| 59 | S&F modular white cover plate with frame of 3 module as per existing model and type complete all as specified. |
| 60 | S&F modular white cover plate with frame of 4 module as per existing model and type complete all as specified. |
| 61 | S&F modular white cover plate with frame of 6 module as per existing model and type complete all as specified. |
| 62 | S&F modular white cover plate with frame of 8 module as per existing model and type complete all as specified. |
| 63 | S&F modular white cover plate with frame of 12 module as per existing model and type complete all as specified. |
| 64 | S&F modular white cover plate with frame of 18 module as per existing model and type complete all as specified. |
| 65 | S&F modular fan regulator 2 module SP, 240Volt complete all as specified. |
| 66 | S&F modular flush metal box 3 module complete all as specified. |
| 67 | S&F modular flush metal box 4 module complete all as specified. |
| 68 | S&F modular flush metal box 6 module complete all as specified. |
| 69 | S&F modular flush metal box 8 module complete all as specified. |
| 70 | S&F modular flush metal box 12 module complete all as specified. |
| 71 | S&F modular flush metal box 18 module complete all as specified. |
| 72 | Taking down old U/S sub main wiring of any size & make. |
| 73 | M&L submain wiring complete with 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 4 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface by putti/cement and paint to match with existing complete all as specified. |
| 74 | M&L submain wiring complete with 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor two runs and one run of 6 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface by putti/cement and paint to match with existing complete all as specified. |
| 75 | M&L submain wiring complete with 10 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor four runs and two run of 10 Sqmm copper cable for earth continuity conductor(measured as one RM) in and including drawn through PVC casing capping PVC conduit/sleeves with all PVC accessories fixed on wall, floor/ceiling and making good the distrubed surface by putti/cement and paint to match with existing complete all as specified. |
| 76 | Taking down old U/S rusted main switch/DB of any size capacity complete all as specified. |
| 77 | M&L of Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs :- |
| 78 | (a) 4 way TPN with busbar 415 volts (double door type) complete all as specified. |
| 79 | (b) 12 way SPN with200 Amp rated busbar 240 volts (double door type) complete all as specified. |
| 80 | (c) 8 way SPN with200 Amp rated busbar 240 volts (double door type) complete all as specified. |
| 81 | (d ) 4 Way SPN with 200Amp rated busbar 240V (Double door type) complete all as specified. |
| 82 | S&F MCB 240 volts 10 KA, rupturing capacity fixed in DB's of the undermentioned type and rating. |
| 83 | (a) MCB SP 240 volts 10-40 Amps |
| 84 | (b) MCB SPN 240 volts, 40 Amps |
| 85 | (c) MCB TPN 415 volts, 63 Amps 16 KA 4 Pole |
| 86 | S & F LED batten 20watt suitable for 1200mm long with G-13 lamp holder T5 and T8 , housing finished in aluminium powder coating with all accessaries complete all as specified. |
| 87 | M&L batten/angle holder insulated with back plate including suitable size of PVC round block make Anchor code No 51205 complete all as specified. |
| 88 | S&F LED bulb 07W cool day light , in-built voltage surge protection > 3.5kV, single ph, 230V, luminous efficacy 100Lm/Watt, base B22, min 3 star rated complete all as specified. |
| 89 | S & F LED light fitting mirror type with high output diffurser 2 feet, 7w/10w 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable suitable size complete all as specified. |
| 90 | Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid inside the pipes of sutiable sizes including clip/clamp/nut bolts as required for cable size 16 Sqmm 2 core complete all as specified. |
| 91 | Supply and fix in repair bulk head light 1x10w with surge protection, dust and water resistant hexagonal/circular shape ,operating voltage 140V to 270V, 50hz, minimum lumen output of 80lm/W ,THD less then 15% polycarbonate body CCT 6500k complete all as specified. Please Enable Macros to View BoQ information |
| 92 | Supply and fix in repair bulk head light 1x10w with surge protection, dust and water resistant hexagonal/circular shape ,operating voltage 140V to 270V, 50hz, minimum lumen output of 80lm/W ,THD less then 15% polycarbonate body CCT 6500k complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender