Tender For Special Repair To Sewage Line And Other Allied Works At 180 Or Mahipalpur Under Age B/R-Ii Of Ge (South) Delhi Cantt-10
Tender Value
47.50 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
8 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Sewage Line And Other Allied Works At 180 Or Mahipalpur Under Age B/R-Ii Of Ge (South) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ infoundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out in the excavated all type of soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed. |
| 2 | All as per srl item No 1.00 here-in-before but exceeding 1.50 m and not exceeding 3.0 m depth complete all as specified and as directed. |
| 3 | All as per srl item No 1.00 here-in-before but exceeding 3.0 m and not exceeding 4.50 m depth complete all as specified and as directed. |
| 4 | M&L for concrete bed to 150 mm internal dia drain pipes in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregates including packing under and haunching against the sides of pipes and testing after they are laid, (Thickness of bed below the pipes shall be 150 mm and width shall be D+300mm) including demolition of unserviceable concrete any type complete all as specified and as directed. |
| 5 | M&L for concrete bed to 200 mm internal dia drain pipes in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregates including packing under and haunching against the sides of pipes and testing after they are laid. (Thickness of bed below the pipes shall be 150 mm and width shall be D+300mm) including demolition of unserviceable concrete any type complete all as specified and as directed. |
| 6 | M&L for concrete bed to 250 mm internal dia drain pipes in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregates including packing under and haunching against the sides of pipes and testing after they are laid, (Thickness of bed below the pipes shall be 150 mm and width shall be D+300mm) including demolition of unserviceable concrete any type complete all as specified and as directed. |
| 7 | M&L for 150 mm internal dia Double wall corrugated high density polyethylene pipe (DWC HDPE) (SN8) Conforming to IS 16098 (Part 2) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, including demolition of unserviceable existing pipe any type any dia complete all as specified and as directed. |
| 8 | M&L for 200 mm internal dia Double wall corrugated high density polyethylene pipe (DWC HDPE) (SN8) Conforming to IS 16098 (Part 2) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, including demolition of unserviceable existing pipe any type any dia complete all as specified and as directed. |
| 9 | M&L for 250 mm internal dia Double wall corrugated high density polyethylene pipe (DWC HDPE) (SN8) Conforming to IS 16098 (Part 2) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, including demolition of unserviceable existing pipe any type any dia complete all as specified and as directed. |
| 10 | Cutting into existing road for laying of DWC HDPE (SN8) / NP-2 pipes upto 300 mm dia pipe as directed and making good the disturb portion of road as per the existing road layers or road specification complete all as specified and as directed. |
| 11 | S&F Precast RCC circular manhole of size 0.60m (cover) x 1.20m (internal dia) x 1.05m (depth) (MH-1) with precast RCC cover slab including demolition of unserviceable existing main hole any dia or any type complete all as specified and as directed. |
| 12 | S&F Precast RCC circular manhole of size 0.60m (cover) x 1.20m (internal dia) x 1.90m (depth) (MH-2) with precast RCC cover slab including demolition of unserviceable existing main hole any dia or any type complete all as specified and as directed. |
| 13 | S&F Precast RCC circular manhole of size 0.60m (cover) x 1.50m (internal dia) x 2.65m (depth) (MH-3) with precast RCC cover slab including demolition of unserviceable existing main hole any dia or any type complete all as specified and as directed. |
| 14 | S&F Precast RCC circular manhole of size 0.60m (cover) x 1.50m (internal dia) x 3.60m (depth) (MH-4) with precast RCC cover slab including demolition of unserviceable existing main hole any dia or any type complete all as specified and as directed.Note for item No 11 to 14 :- The minimum grade of RCC shall be M-25 (Design Mix) for all precast RCC manhole.Make :- Shubh Sanskar Concrete (I) Pvt Ltd / BRHC Concrete Industries / Tokas Concrete Products / Jain Spun Pipe Co. |
| 15 | M&L for 450 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars including cement concrete 1:4:8 type D2 (40mm graded aggregate) in bed to 450 mm dia pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete including dismantling all as specified and as directed. |
| 16 | Returning and filling including spreading leveling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and as directed. |
| 17 | Removing excavated materials exc 50 m but nexc 250 m at a level n.exc. 1.50 above the starting point and depositing where directed by Engineer-in-Charge. |
| 18 | Dismantling of wrought iron or mild steel work of any description, otherwise provided, complete all as specified and as directed. |
| 19 | S&F mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) incudingl all necessary drilling, bolting and riveting, etc, and similar work conforming to Fe 410-o or Fe 130-O complete all as specified and as directed. |
| 20 | M&L for excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. |
| 21 | Dismantling fencing wiremess, complete all as specified and as directed. |
| 22 | M&L for cement concrete 1:3:6 type-C2 (40 mm graded crushed stone aggregate) as in filling of post holes as mass concrete etc complete all as specified and as directed. |
| 23 | Supply only Chain link MS galvanised fencing any size or type complete all as specified and as directed. |
| 24 | Fixing only chain link MS galvanised fencing any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed. |
| 25 | S & F mild steel screw bolts 11 to 15 mm dia of neck (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and as directed. |
| 26 | S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 27 | M&L for preparation of new steel and iron surfaces exceeding 10 cm width or grith and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 28 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 29 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender