Tender For Repair Replacement Of Flooring, Wall Panelling, Joinery, Sanitary Fittings,Plumbing, Ceiling And Other Misc Work At Officer Accn And Offices In Naugam Mil Stn Under Ge 969 Ews
Tender Value
24.94 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
17 days left
EMD
49880
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Replacement Of Flooring, Wall Panelling, Joinery, Sanitary Fittings,Plumbing, Ceiling And Other Misc Work At Officer Accn And Offices In Naugam Mil Stn Under Ge 969 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demoliton of cement concrete (un-reiforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) ,complete all as specified and as directed. |
| 2 | M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded agg as in flooring,complete all as specified and as directed. |
| 3 | M& L for 75 mm thick PCC 1:4:8 type C-2 using 40 mm graded aggregate as in sub base,complete all as specified and as directed. |
| 4 | M& L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protection finished even and smooth w/o using extra cement,complete all as specified and as directed. |
| 5 | M & L Cement concrete in foundations, filling and mass concrete1:3:6 type C-2 using 40 mm graded aggregate 75 mm thick,complete all as specified and as directed. |
| 6 | M&L Sand filling under floors or in foundations including watering and consolidation,complete all as specified and as directed. |
| 7 | M& L Machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment,complete all as specified and as directed. |
| 8 | M & L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6),complete all as specified and as directed. |
| 9 | M&L Chequered cement concrete tiles 30cm x 30m x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thick screed bed in CM (1:4) for laying floor finishes,complete all as specified and as directed. |
| 10 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of f the permishes,complete all as specified and as directed. |
| 11 | M & L for glazed ceramic tiles in vertical surface350x250x7mm/450x350x7mm mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4),complete all as specified and as directed. |
| 12 | M & L for non skid coloured printed ceramic tile 8 to 10 mm thick ( Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4),complete all as specified and as directed. |
| 13 | Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar,complete all as specified and as directed. |
| 14 | M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6,complete all as specified and as directed. |
| 15 | M&L Walling of random rubble mm thick, uncoursed built in CM (1:6),complete all as specified and as directed. |
| 16 | M & L For Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement,complete all as specified and as directed. |
| 17 | Preparation of Preparing surfaces plastered New surfaces walls and applying two coat of white wash,complete all as specified and as directed. |
| 18 | Preparation of undecorated surfaces of old surfaces walls Washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of white wash,complete all as specified and as directed. |
| 19 | S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position including dismantling,complete all as specified and as directed. |
| 20 | Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work,complete all as specified and as directed. |
| 21 | M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section,complete all as specified and as directed. |
| 22 | Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets any thickness inlcuding cover fillets,complete all as specified and as directed. |
| 23 | S&F 6 mm thick insulation consisting of PVC Insulated Panels as in wall having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium) |
| 24 | S&F 6 mm thick insulation consisting of PVC Insulated Panels as in ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing. Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium) |
| 25 | M & L of 4 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) in ceiling, fixed with nails to timber frame work,complete all as specified and as directed. |
| 26 | M & L of 4 mm thick veneered decorative plywoode,grade 1 (with decorative face veneers on one faces) on wall, fixed with nails to timber frame work,complete all as specified and as directed. |
| 27 | M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section,complete all as specified and as directed. |
| 28 | All as item no. 27 above but except sheeting removing and refixing in repair,complete all as specified and as directed. |
| 29 | Taking down of Shutters of any description n exc 1 sqm each,complete all as specified and as directed. |
| 30 | Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each,complete all as specified and as directed. |
| 31 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm,complete all as specified and as directed. |
| 32 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm,complete all as specified and as directed. |
| 33 | S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and as directed. |
| 34 | S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats,complete all as specified and as directed. |
| 35 | S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers,complete all as specified and as directed. |
| 36 | S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b),complete all as specified and as directed. |
| 37 | S&F Door closer hydraulically regulated cost iron body designation No 1 universasl type suitable for door shuutters up to 700 mm in width and of weeight not more than 35 kgs |
| 38 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed,complete all as specified and as directed. |
| 39 | S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed,complete all as specified and as directed. |
| 40 | S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and as directed. |
| 41 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel,complete all as specified and as directed. |
| 42 | S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel,complete all as specified and as directed. |
| 43 | S&F Aluminium handles 100 mm , cast type,anodised ,complete all as specified and as directed. |
| 44 | S&F Aluminium handles 150 mm , cast type,anodised,complete all as specified and as directed. |
| 45 | S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring,complete all as specified and as directed. |
| 46 | S & F anodised aluminium door shutter with chowkat including 5.5 mm thick tinted glass selected quality with hydroulic floor door closer , hinges.Aluminium section for chowkat weight not less than 0.55 kg per running meter including necessary jointing,cleat glazing clips rubber packing aluminium handles , locking arrangement design and approved by Engr- in -charge |
| 47 | M&L two coats of synthetic enamel paint over and incl a coat of pink primer including preparation of surface on new wooden sruface over 10 cm width or girth,complete all as specified and as directed. |
| 48 | Dismantling boarding, any description, fixed in any position with nails,complete all as specified and as directed. |
| 49 | S&F Softwood 2nd class Clean sawn with butt joints eaves boards 20 mm thick,complete all as specified and as directed. |
| 50 | M&L Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed,complete all as specified and as directed. |
| 51 | S & F 25 mm thick 2nd class soft wood Planed one side & edges tongued and grooved or rebated, with nails in flooring and skirting,complete all as specified and as directed. |
| 52 | S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove joint as in ceiling panelling,complete all as specified and as directed. |
| 53 | M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with one or more coats,complete all as specified and as directed. |
| 54 | M&L two coats of synthetic enamel paint including preparation of surface on old wooden surface over 10 cm width or girth,complete all as specified and as directed. |
| 55 | S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make)(g) Making good of wall surface to match with existing surface complete. |
| 56 | S&F aluminium alloy powder coated aluminium sliding windows three track with movable shutters (sliding on minimum two PVC roller of best quality, for such shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50mm thick glass & stainless steel wire mesh fixed with neoprane rubber gasket with aluminium beading clips frame made with aluminium section as appended below :-(a) Window Frame - 75mm x 35mm x 1.48mm thick..(b) Top/Bottom rail and style/rail of shutter - 38mm x 19mm x 1.48mm thick and cover (c) Aluminium beading / clips - 0.7mm thick.(d) Stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium fire staples complete.(e) Aluminium fittings such aluminium suitable handle with auto interlocking closing.(f) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 57 | S&F aluminium partition wall of powder coated aluminium hollow sections members of size 63.50mmx38mmx1.48mm with distance of vertical hollow section, 1.2 mtr to 1.8 mtr having top rails, bottom rails and middle rails of size 63.5mm x 38mm x 1.48 mm and upto middle rails wall panels shall be covered by 5mm glass thick aluminium composite panel LDPE core PET coating (both side decorative type) with aluminium clip height of middle rail shall be 1.0 mtr from floor and remaining portion above middle rail shall be provided with 5mm glass incl approved designed with aluminium strips/beadings with rubber gasket as per existing or as per provided complete all as specified and directed. |
| 58 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 |
| 59 | Taking down and replaced with 15 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed to walls/ceilings,complete all as specified and as directed. |
| 60 | Taking down and replacement 20 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors,complete all as specified and as directed. |
| 61 | Taking down and replacement 25 mm 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors , complete all as specified and directed. |
| 62 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,complete all as specified and as directed. |
| 63 | S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish,complete all as specified and as directed. |
| 64 | S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish,complete all as specified and as directed. |
| 65 | M&L Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 ltrs to 500 Ltrs,complete all as specified and as directed. |
| 66 | S & F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed,complete all as specified and as directed. |
| 67 | S&F Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed , chromium plated,complete all as specified and as directed. |
| 68 | S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe,complete all as specified and as directed. |
| 69 | S&F in repairs for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule,complete all as specified and as directed. |
| 70 | S&F in repair stop valves fancy tupe chromium plated screwed down high presure , with crutch or butterfly handle, cscrewed both ends for iron pipe or for unions 15 mm bore,complete all as specified and as directed. |
| 71 | S&F in repair vitreous china wash down water closet pan (one piece type) ivory with PVC sheet cover & flushing cistern, flushing pipe), including making good the floor with adjacent floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/watse materials to a distance n. exc 50m,complete all as specified and as directed. |
| 72 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long,complete all as specified and as directed. |
| 73 | S&F in repair vitreous chine wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl braxkets with waste fittings and connection pipe etc including pedestal,complete all as specified and as directed. |
| 74 | S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed,complete all as specified and as directed. |
| 75 | S&F in repairs vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cober incl provision of concrete/ white cementing and P or S trap,complete all as specified and as directed. |
| 76 | S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing,complete all as specified and as directed. |
| 77 | S&F Sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square exceed 0.5 sqm in each pane including hacking out old brioken glass,complete all as specified and as directed. |
| 78 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages,complete all as specified and as directed. |
| 79 | S&F in repairs corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard,complete all as specified and as directed. |
| 80 | S & F in repairs Brass CP wall mixer 15 mm for mixing hot & cold water screwed down for iron pipeand fixed,complete all as specified and as directed. |
| 81 | S &F in repairs curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc,complete all as specified and as directed. |
| 82 | S&F in repairs Rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkat,complete all as specified and as directed. |
| 83 | S&F in repairs Vitreous China Wall Hung coupled closet including cistern with lid dual flush fitting with PVC seat cover size not less than 665x360x765 mm (white) including fixing bolt,complete all as specified and as directed. |
| 84 | S&F in repairs CP health faucet (ABC) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connection and fixed in position completed in all respected,complete all as specified and as directed. |
| 85 | S&F toilet paper holder premium quality, stainless steel or brass chromium plated,complete all as specified and as directed. |
| 86 | S&F in repairs CP jet spray with flexible tube 1.5 mtr long,complete all as specified and as directed. |
| 87 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms),complete all as specified and as directed. |
| 88 | S&F in repairs Vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe,complete all as specified and as directed. |
| 89 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup,complete all as specified and as directed. |
| 90 | S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples,complete all as specified and as directed. |
| 91 | S&F in repairs 20 mm Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples,complete all as specified and as directed. |
| 92 | S & F in repairs Brass CP basin mixer 15 mm for mixing hot & cold water screwed down for iron pipeand fixed,complete all as specified and as directed. |
| 93 | S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor,complete all as specified and as directed. |
| 94 | S&F in PVC (SWR) junction single T equal or unequal 110 mm dia,complete all as specified and as directed. |
| 95 | S&F PVC (SWR) bends 110 mm dia fixed,complete all as specified and as directed. |
| 96 | S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor,complete all as specified and as directed. |
| 97 | S&F in PVC (SWR) junction single T equal or unequal 75 mm dia,complete all as specified and as directed. |
| 98 | S&F PVC (SWR) bends 75 mm dia fixed,complete all as specified and as directed. |
| 99 | S&F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II,complete all as specified and as directed. |
| 100 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010,complete all as specified and as directed. |
| 101 | Note:- Schedule of credit Rs 62,698.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender