Tender For Addition/ Alteration To Building No P-01 (Officer Mess) And Repair/Replacement Of Roofing, Ceiling And Flooring Of Gym Near Bldg No P-27 At Coast Guard Under Ge Haddo, Sri Vijaya Puram
Tender Value
45.40 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
19 days left
EMD
90800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration To Building No P-01 (Officer Mess) And Repair/Replacement Of Roofing, Ceiling And Flooring Of Gym Near Bldg No P-27 At Coast Guard Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each all as specified and directed. |
| 2 | Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each all as specified and directed. |
| 3 | Demolition of (unreinforced) cement concerete in ground floors and paving not exceeding 15 cm thickness (below or above GL) etc, complete all as specified and as directed. |
| 4 | M&L for providing PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection 75 mm thick finished over and smooth without using extra cement etc all as specified and directed. |
| 5 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed by Engineer-in-Charge. |
| 6 | M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base for floors all as specified and directed. |
| 7 | M&L for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases etc, (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as specified and directed. |
| 8 | M&L PCC 1:2:4 type B2 (40mm grade stone agg) as in cement concrete in surface channel and drain, (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as specified and directed. |
| 9 | Material and labour for providing Plain Cement Concrete (1:2:4) type B1 using 20 mm graded aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones etc water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work, (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as specified and directed. |
| 10 | M&L for Reinforced cement concrete Type B1,1:2:4 using 20mm graded stone aggregate in Slab supported on walls, as in Shelves all as specified and directed. |
| 11 | M&L for use of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thickrough finished flat concrete surfaces all as specified and directed. |
| 12 | Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified. |
| 13 | Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 6 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified. |
| 14 | Demolition of Brickwork or stone/boulder masonry, built in cement ortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast masonry concrete articles |
| 15 | M&L for pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 all as specified and directed. |
| 16 | M&L for fly ash modular block masonry, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) etc all as specified and as directed. |
| 17 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 18 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 20 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 21 | Supply and fix 30mm thick \\" FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 4 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings. |
| 22 | Supply and fixing stainless steel (SS-304 grade) hinges 100x62x2.5 mm of approved quality, with necessary stainless steel screws etc, complete all as specified and directed. |
| 23 | Taking down Aluminium Windows chowkhats or door frames with shutters without taking off shutters from frames exe 1.5 Sqm and n.exc 4 Sqm each etc complete all as specified and directed. |
| 24 | Taking down Aluminium Windows and Ventilator chowkhats or frames with shutters without taking off shutters from frame n. exe 1.5 Sqm each etc complete all as specified and directed. |
| 25 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 26 | S&F for Powder coated Aluminium grill (minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge. |
| 27 | M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to timber or Aluminium frame work etc all as specified and directed. |
| 28 | Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 29 | Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 30 | Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples or beading etc complete all as specified and directed. |
| 31 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed |
| 32 | Supply and fix as in repairs 200 mm long of brass, barrel tower bolts of extruded section complete all as specified |
| 33 | Supply and fix in repairs 150 mm long extruded brass handles, cast type, polished bright etc, complete all as specified. |
| 34 | S & F for Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, length of bolt in 300 mm etc complete all as spd and directed. |
| 35 | S&F door seal bottom of width not less than 30 mm and length (ranges 500 mm to 1200 mm) suitable according to door shutter width to protect entry of insects efficiently, etc all as specified and as dierected. |
| 36 | S & F for 150 mm length floor door stopper of brass body and tongue, anodised,with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm,etc complete all as spd and directed. |
| 37 | Dismantling boarding, shelves, partitions of any description, fixed in any position with nails, screws, clamps, etc all as specified and directed. |
| 38 | M&L for work in 16-18mm thick HDHMR Boards with decorative choice lamination on one side and balancing white lamination on other side , fixed with screws/nails as in cupboards, sides of shelves, partitions, including 2 mm thickself adhesive bedding and in simillar works, etc all as specified and as directed.. |
| 39 | S&F Auto concealed hinges stainless steel grade AISI-316 (type Austenitic anticorrosive in nature) suitable for kitchen cabinets, cub boards, Shelves etc complete all as specified and as directed. |
| 40 | S&F SS Fancy 'D' Type Drawer / Cabinet handles of Size 100mm, etc all as specified and as dierected. Make Prayag Cat No SSB-2100) |
| 41 | S&F Magnetic catcher with plate, glossy finish for Drawer / Cabinet of Size not less than 50mm, etc all as specified and as dierected.Make Prayag Cat No MDC-W55) |
| 42 | S&F Stainless steel Telescopic channel 18 inches length with necessary fitting, etc all as specified and as dierected.Make Godrej Cat No 9721) |
| 43 | M&L for 12mm thick sheet glass toughned glass as in hinged doors, partitions automatic doors closer, and similar work including cutting to shape, drilling holes required etc, if sheet glass is ground or obscured or frosted, on one side including hacking out old glass panes complete all as specified |
| 44 | S&F Stainless Steel EGF combo with lock heavy duty automatic floor spring (80Kg) load, with necessary fitting, etc all as specified and as dierected. Make : Godrej or equivalent as approved by GE. |
| 45 | S&F Stainless steel 25mm thick glass door full handle 14 inches length with necessary fitting, etc all as specified and as dierected.Make Prayag Cat No SH25-14P-SS) |
| 46 | Dismantling structural steel work of any description complete all as specified. |
| 47 | M&L for rolled section as in main and cross beam, hip and jack rafter,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of grade Fe-410 (grde E-250)quality-A, etc complete all as specified and as directed |
| 48 | M&L for aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering and including dismantling of old wind tie etc fixed with self tapping screws as specified. |
| 49 | Material and labour mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 290 grade E-165 etc, complete all as specified and as directed. |
| 50 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including or similar pattern roof coverings etc, complete all as specified and as directed. |
| 51 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified and as directed. |
| 52 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified and directed. |
| 53 | M&L in repairs to Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0micron fixed over frame of aluminium tabular section 50x25mmx 2.0mm thick, having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in column, beam, wall at any height with necessary scafoldings etc complete as specified and as directed. |
| 54 | S&F for 0.71 mm thickness Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) with necessary fittings etc, complete all as specified and directed. |
| 55 | S&F PVC insulation panels (thickness of insulation pannel 10mm) with EPS stuck to 1mm plain PVC sheet suitable placed in false ceiling grid made of Anodised aluminium snap grid frame work for false ceiling and including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm, long including dismantling of ceiling boards including grid of any description fixed in any position with nails or screws etc all as specified and as directed. |
| 56 | Supply & Installation of WPC False Ceiling exterior/interior grade Wood Plastic Composite (WPC) false ceiling panels (5 mm / light weight standard interlocking profile) of approved shade and timber texture. Item includes aluminum heavy-duty perimeter channels, main runners, intermediate sections suspended with adjustable hangers, clips, metal fasteners, and jointing accessories complete as per drawing and direction of Engineer-in-Charge |
| 57 | M&L for 3 mm thick Polygranite Sheet boards as in Wall/Ceiling panelling work fixed over frame work using suitable aluminium profile sections of size 50mmx25mmx2mm thick and fixed with suitable screws / fasteners as per the site requirents including jointing clip with suitable colour etc, complete all as specified and directed.Note: Design and Pattern will be finilized by the Engr In charge. |
| 58 | Material & Labour for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc, complete all as specified and as directed. |
| 59 | S& F in repairs, 25 mm dia Stainless steel curtain rods with fancy type curtain brackets, stops, rollers as per the site requirements etc complete all as specified and as directed. |
| 60 | M& L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes etc,complete all as specified and directed. |
| 61 | M & L for Non-Skid heavy duty ceramic tiles of size 600 X 600 X 10mm thick, or high dimension (except thickness) of any colour any design Durastone, weather proof impact resistant, abrasion resistant exterior tiles, as in floors vertical cladding and etc , set and jointed in neat cement slurry over and pointed in white or coloured cement to match, over 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 62 | Material and labour for 3mm thick epoxy grouting for tiles etc, complete all as specified and directed. |
| 63 | M&L for vitrified ceramic tiles minimum 8-10mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in vertical surfaces using with white Roff cement such as skirting, dados and riser etc set including spacers and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3 complete all as specified and directed |
| 64 | M& L for Non Skid Ceramic matt finished tiles coloured shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed.complete all as specified and directed. |
| 65 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms,floor, walls and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and polishing including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 66 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 67 | S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm etc complete all as specified. |
| 68 | Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc complete all as specified. |
| 69 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 70 | S& F for 20mm bore Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. complete to walls, ceiling or in floor, including taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 71 | Supplying and fixing of outer diameter 20 mm CPVC Brass Elbow fittings on walls/ceiling or laying in floors complete all as specified. |
| 72 | Supplying and fixing of outer diameter 20 mm CPVC Brass Tee fittings on walls/ceiling or laying in floors complete all as specified. |
| 73 | S& F for 25mm bore Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. complete to walls, including taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 74 | Supplying and fixing of outer diameter 25 mm CPVC Brass Elbow fittings on walls/ceiling or laying in floors complete all as specified. |
| 75 | Supplying and fixing of outer diameter 25 mm CPVC Male Brass Threaded Adaptor (MTA/ MBTA) fittings on walls/ceiling or laying in floors complete all as specified. |
| 76 | Supplying and fixing of outer diameter 25 mm CPVC Female Brass Threaded Adaptor (FTA/ FBTA) fittings on walls/ceiling or laying in floors complete all as specified. |
| 77 | Supplying and fixing of outer diameter 25 mm CPVC UNION fittings on walls/ceiling or laying in floors complete all as specified. |
| 78 | Supplying and fixing of outer diameter 25 mm CPVC Ball Valve fittings on walls/ceiling or laying in floors complete all as specified. |
| 79 | S&F in repairs of PVC waste pipe 31x32x850 mm long, etc complete all as specified and directed.(Make : Prayag Cat No. 3272 or Equivalent) |
| 80 | S&F in repairs PVC connection 15 mm dia and 450 mm long with both and nuts etc complete all as specified. |
| 81 | Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 82 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) etc complete all as specified and as directed. |
| 83 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent etc complete all as specified and as directed. |
| 84 | S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent etc complete all as specified and as directed. |
| 85 | S&F for 110mm dia PVC (SWR) bends any radius etc complete all as specified and as directed. |
| 86 | S&F for 110mm dia PVC (SWR) bends with acess door any radius etc complete all as specified and as directed. |
| 87 | M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified. |
| 88 | Providing and fixing stainless steel linear floor drain grating of size 300 mm × 100 mm (12 inch × 4 inch) made of SS 304 grade stainless steel, complete with removable top grating, frame, anti-cockroach/anti-odour trap arrangement, outlet connection, and all fixing accessories, including embedding in floor, cutting/chasing, and making good the damaged portion complete, all as specified and directed by Engineer-in-Charge. |
| 89 | S&F in repair vitreous china wash down water closet (Rimless Blind Installation Wall Hung WC - Black Matt , Rimless Wall Hung WC), sanipure complete with UF soft close seat cover, concealed cistern body, control plate alive, inlet & outlet connection, fixing bolts, brackets and all other connected accessories, fixed to wall in approved manner and making good disturbed surfaces complete all as specified and directed. Make : Jaquar Cat No : LAS-BLM-91953BIUFor equivalent |
| 90 | S&F in repair Metropole Flush Valve Dual Flow 32mm Size (Concealed Body) with Concealed Shut off Provision & Rectangular Dual Flush Plate, ABS Chrome Plated (3.0/6.0 Lts. Per Flushing)(Metropole Flush Valve Dual Flow 32mm Size (Concealed Body) - Black Matt), and all other connected accessories, fixed to wall in approved manner and making good disturbed surfaces complete all as specified and directed. Make : Jaquar Cat No :FLV-BLM-1085DFPor equivalent |
| 91 | S&F in repair Table Top Basin,Size: 450x450x130 mm, Shape: Square (Table Top Basin Laguna - Black Matt) including , 32 mm CP waste coupling, waste fittings all necessary inlet and out let connections complete all as specified Make : Jaquar (Cat Part No : LAS-BLM-91903 or equivalent |
| 92 | S&F in repair Joystick Basin Mixer without Popup Waste with 450mm Long Braided Hoses (Joystick Basin Mixer - Black Matt ) 15 mm dia, fancy type, all other fixing accessories, complete all as specified and as directed. Make : Jaquar Cat Part No : ARC-BLM-87011B or equivalent |
| 93 | S&F in repair single Kubix Prime Pillar Cock with 190mm Extension Body (Pillar Cock - Black Matt ) 15 mm dia, cast copper alloy, fancy type, with single lever handle, concealed wih lever basin and all other fixing accessories, complete all as specified and as directed. Make : Jaquar Cat Part No : KUP-BLM-35021PM or equivalent |
| 94 | S&F in repair Hand Shower (Health Faucet) Long Easy Flex Tube & Wall Hook Hand Shower (Health Faucet - Black Matt) suitable for 15 mm dia pipe with 1.5 metre long flexible tube and premium wall bracket hook including making connections and fixed in position complete all as specified and directed Make : Jaquar Cat part No ALD-BLM-565 or equivalent |
| 95 | S&F in repair Angular Stop Cock with Wall Flange 15mm dia, (Angular Stop Cock - Black Matt), fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions complete all as specified and as directed. Make : Jaquar Cat part No KUP-BLM-35053PM or equivalent |
| 96 | S&F for 2-Way Bib Cock with wall flange - Black Matt premium wall bracket hook including making connections and fixed in position premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Jaquar Code : OPP-BLM-15041PM or equivalent |
| 97 | S&F in repair Exposed Part Kit of Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout (Exposed Part Kit of Single Lever Basin Mixer Wall Mounted - Black Matt) 15 mm dia, cast copper alloy, fancy type, with single lever handle, concealed wih lever basin and all other fixing accessories, complete all as specified and as directed. Make : Jaquar Cat Part No : ALD-233N or ALD-235N or equivalent |
| 98 | S&F in repair (Towel Rack - Black Matt) Towel Rack 600mm Long without Lower Hangers but with 3 hooks, Stainless Steel etc, premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Make : Jaquar Cat part No ACN-BLM-1181FHS or equivalent |
| 99 | S&F in repair Toilet Roll Holder with Stainless Steel Flap (Toilet Roll Holder with Flap - Black Matt) premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Make :Jaquar Code ACN-BLM-1153S or equivalent |
| 100 | S&F in repair Towel Ring Round with Round Flange - Black Matt, premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Make Jaquar ACN-BLM-1121BN or equivalent |
| 101 | S&F Soap Dish Holder - Black Matt of fixed to plugs with chromium plated brass screws premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Make : Jaquar Cat part No AKP-BLM-35731P or equivalent |
| 102 | S&F for Bottle Trap 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange wall flange - Bottle Trap - Black Matt premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Jaquar Code : ALD-BLM-769L250X190 or equivalent |
| 103 | S&F Soap Dispenser with Metallic Bottle Soap (Soap Dispenser - Black Matt) premium wall bracket hook including making connections and fixed in position premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Make :Jaquar Cat part No ACN-BLM-1137N or equivalent |
| 104 | S&F Wall Mounted Mirror Fancy type 800x800mm square frame surrounded with LED light and touch switch defogger, 3 colors lamp (white/yellow/warm) etc all other fixing accessories, complete all as specified and as directed. Make : Hindware Italian F680020 or equivalent |
| 105 | S&F for Urinal full stall (Back Inlet) With Fixing Accessories, Size: 385x325x635 mm premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. ( Urinal - Black Matt). Jaquar Code : URS-BLM-13253N or equivalent |
| 106 | S&F for Curved shaped urinal partition with frosted glass 8 mm thick Basin/Urinal Partition Urinal Finish: Chrome Size H: 900 W: 450, premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Jaquar Code : JSE-CHR-810UC450X or equivalent |
| 107 | S&F for Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange (Urinal Valve Auto Closing System ) Pressmatic Taps, premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Jaquar Code : PRS-CHR-077 or equivalent |
| 108 | S&F for Corner Glass Shelf (with Bracket) (Corner Glass Shelf - Black Matt ) Pressmatic Taps, premium wall bracket hook including making connections and fixed in position complete all as specified and directed etc, complete all as specified and directed. Jaquar Code : ACN-BLM-1173 or equivalent |
| 109 | Taking down of damaged/ loosened cement concrete/cement mortar in RCC walls/soffits of slabs and similar structure members up to depth of 20mm to 40mm. Cleaning the dismantled portion with wire brush, etc to remove dust , dirt and other foreign particles and washing with water under pressure and applying bonding agent on old concrete surfaces all as per manufacturers instruction, Providing and applying two coats of rust preventive slurry made of \\"Polyalk Fixoprime\\" or equivalent in portion 1:1.5 to existing reinforcement bars over prepared surfaces provide and apply 20 mm thick High build polymer modified cement sand mortar ( 1:2.5 ) mixed with 10 liters (minimum) Nitobond SBR per 50 kilogram of cement of M/s FOSROC chemical ( India ) Pvt Ltd or Equivalent product of manufacturer all as manufacturers instruction including necessary scaffolding up to 12 m height complete and finally applying two coats of oil bound distemper with roller finish over a coat of chalk whiting primer over an avg 2mm thick of wall care putty all as specified and directed. |
| 110 | Supply only polyester triangular fibres as secondary reinforcement in all types of concrete and mortars, etc complete all as specified and directed. |
| 111 | M&L for rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement, etc complete all as directed.Note: Water proofing compound shall be measured and paid separately. |
| 112 | Supply only integral water proofing compound all as specified and as directed. |
| 113 | M&L rendering 15mm thick in CM 1:6 on brick surfaces and finished even and smooth w/o using extra cement etc, completed all as specified and directed. |
| 114 | M&L for rendering 5mm thick in cement mortar 1:3 on fair faces of ceiling concrete surfaces finished even and smooth without using extra cement complete all as directed. |
| 115 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc, all as specified and directed |
| 116 | M&L for new plastered on walls and applying two coats of oil bound distemper over a preparatory coat of 1mm thickess of plaster of paris putty on plastered surface over a coat of priming plastered and other surfaces with alkali resistant priming paint, including necessary preparation of surfaces etc, completed all as specified and directed. |
| 117 | M&L preparation of new plastered ceilling surfaces and applying two coat of distemper oil emulsion over a coat primer including 1mm thickess of plaster of paris putty on plastered surface etc, complete all as specified and directed. |
| 118 | M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc with 1mm thick plaster of paris putty and applying two coats of acrylic emulsion distemper over one coat primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. all as specified. |
| 119 | Material and labour for Preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying one coat of oil emulsion distemper (white/Tinted) complete all as specified and as directed. |
| 120 | M&L for preparation old plastered surface of wall and applying one coats of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over existing painted surfaces etc complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard or equivalent).Note: Rate quoted shall be deemed to include scafolding upto 12m height or as per the actual site requirements. |
| 121 | M&L for preparation of new/old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete all as specified and directed |
| 122 | Material & Labour for preparation of old treated surfaces, and apply two coats of french polishing over a coats oil staining on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler etc, all as specified and directed |
| 123 | M&L preparing old wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified |
| 124 | Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed. |
| 125 | Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed. |
| 126 | Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed. |
| 127 | M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Make of wire : Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 128 | All as per item Sl No.127 above, but, for One light/fan point controlled by one modular switch 6 Amps one way complete all as specified and directed. |
| 129 | All as per item Sl No.127 above, but , for one modular 3 pin 6 Amp socket out let on independent board complete all as specified and directed. |
| 130 | All as per item Sl No.127 above, but, for one modular 3 pin 6 Amps socket outlet on same Board complete all as specified and directed. |
| 131 | All as per item Sl No.127 above, but , for one bell point controlled by one modular bell push switch 6 Amps one way complete all as specified and as directed. |
| 132 | All as per item Srl No.127 above, but , point wiring with 4.0 sqmm PVC FRLSH insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board complete all as specified and directed. |
| 133 | S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. |
| 134 | S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed. |
| 135 | S & F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. |
| 136 | S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16 Amp , universal complete all as specified and directed. |
| 137 | S & F modular bell push 5 Amps 1 modular 230v, 50Hz AC complete all as specified and directed. |
| 138 | S & F stepped type electronic fan regulator modular type complete all as specified. |
| 139 | S & F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete all as specified and as directed. |
| 140 | S&F bell Ding Dong AC suitable for working on 230 volts 50 hz complete all as specified and directed by engineer-in-charge |
| 141 | Supply & fix Modular AC Box With 20A DP MCB \\"C' Type, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top, 240 volts AC supply for air conditioner, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) model no 98492 or equivalent to Havells/L&T |
| 142 | Taking down carefully ceiling fan/exhaust fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan, make fully functional, rewinding and re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fan complete all as directed. |
| 143 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 144 | Supply and fix exhaust fan 300 mm sweep suitable for working on 230 volts 50 hz supply incl taking down existing exhaust fan of complete all as specified and as directed. |
| 145 | S & F of LED slim panel lighting fixture of 18/20 Watt recess mounted 220V , 50Hz with finished in premium white powder coating ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Luker/CG/ Philips/ Havells. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting . |
| 146 | Supply, installation, testing and commissioning Flexion profile 60 watt 4000 K warm white 5 meter strip with constant voltage LED driver, aluminium profile with opal diffuser, connectors, mounting clips, FRLS copper wiring, fixing accessories complete all as specified and directed. |
| 147 | Supply and fix high brightness IP 65 LED rope light 3000 K with driver 50 meter with uniformity of light required for perfect indoor/outdoor application complete all as specified and as directed |
| 148 | Supply and fixing LED lights fitting 1x 22W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-charge |
| 149 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge |
| 150 | S & F GI brackets of GI pipe light grade of size 32 mm dia including nuts, bolts and washers for building secufity light all as specified and directed |
| 151 | S & F 30/35 watts LED building security light fittings , pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessary fixing arrangements as per site requirements class all as specified and directed by Engr In charge. |
| 152 | Supply and fix LED flood light 200 watts made up of pressure die cast aluminum housing with toughened glass and high power LEDs and secondary lenses with IP 66 protection,efficacy 110/120 PW 10 KV inlcluding driver suitable for working on 230 Volts single phase 50 Hz supply with all accessories complete all as specified and directed by Engineer-in-charge |
| 153 | M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 25 mm wide rigid non-metallic PVC casing and capping and its accessories on surface of wall/ceiling/roof/ floor complete all as specified and as directed. |
| 154 | S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 08 ways,and making good to the distrubed surface /walls. |
| 155 | Supplying & fixing MCB SPN 32/40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed . |
| 156 | Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.Note :- All copper conductors should be connected with MCCB/ MCB alongwith copper reducer terminals of suitable size duly crimpled.” |
| 157 | M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed.NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type RCC chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. |
| 158 | NOTE: The item of BOQ shall be executed in high rise building. The contractor shall arrange necessary scaffolding/ shoring, water pressure jet pump and other safety measures to be undertaken including insurance cover for the workers engaged by him during the execution of work. The rate quoted by the contractor for the above items shall be inclusive of the above provisions . Nothing extra on this account is admissible. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender