Tender For Provn For Constr Of 01 X Store Room Near Single Accn Of Jcos/Or Of 48(I) Sup Pl Asc, Ramgarh Cantt
Tender Value
21.36 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
0 days left
EMD
42720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn For Constr Of 01 X Store Room Near Single Accn Of Jcos/Or Of 48(I) Sup Pl Asc, Ramgarh Cantt
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Nov-2026 | OTHER CORRIGENDUM | Other | 21-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30cm deep & averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out soft/loose soil all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed. |
| 4 | Removing excavated soil not exceeding 50m & depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 5 | Spreading & levelling in layers not exceeding 25 cm thick & well ramming including watering as required complete all as specified and directed. |
| 6 | M&L for cement concrete 1:4:8 type D-2 (40 mm graded aggregate)in foundation, filling and mass concrete all as specified and directed. |
| 7 | M&L for reinforced cement concrete B-1 1:2:4 (nominal mix) (using 20 mm graded crushed stone aggregate) as in foundation including rafts, footings,plinth beams, and mass concrete etc. complete all as specified and directed. |
| 8 | M&L for reinforced cement concrete B-1 1:2:4 (nominal mix) (using 20 mm graded crushed stone aggregate) as in columns,pillars,piers,popst and struts etc. complete all as specified and directed. |
| 9 | M&L for reinforced cement concrete B-1 1:2:4 (nominal mix) (using 20 mm graded crushed stone aggregate) as in lintels beam, floor/roof Beams, cantilevers, bressummers, etc complete all as specified and directed. |
| 10 | M&L for Use & waste of form work to sides of concrete foundation, base of column ,rafts, footings, plinth beams, and plinth beam and similar work for rough finished flat surfaces of concrete complete all as specified and directed. |
| 11 | M&L for Use and waste of form work to sides of columns,pillars,piers,post and struts for rough finished surface of concrete complete all as specified and directed. |
| 12 | M&L for Use and waste of form work to sides and soffit of lintel Beam,floor/roof Beams, etc for rough finished surface of concrete complete all as specified and directed. |
| 13 | M&L for mild steel TMT bars 08 mm dia and over grade Fe -500, as in stirrups, spacers & binders ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc complete all as specified directed. |
| 14 | M&L for mild steel TMT bars 10mm dia and over grade Fe-500, cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed. |
| 15 | M&L for hard core of broken stone or boulder gauge not exceeding 63mm deposited, spread & leveled in layers not exceeding 15cm thick, watered and rammed to a true surface etc complete all as specified& directed. |
| 16 | M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed. |
| 17 | M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base to flooring/hard standing /Paver block etc ,complete all as specified and directed. |
| 18 | M&L for brickwork with fly ash bricks,old size, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 19 | M&L for rendering 10 mm thick on brick masonry/concrete surface etc in CM (1:6) surface finished even & smooth using extra cement complete all as specified and directed. |
| 20 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even & smooth (without using extra lime or cement) all as specified and directed. |
| 21 | M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali primer including necessary scaffolding complete all as specified & as directed. |
| 22 | M&L for preparation of newly plaster surface of wall and applying two coats of Distempering walls with white or tinted over a coat of alkali primer including necessary scaffolding complete all as specified & as directed. |
| 23 | Supply only liquid water proofing compound complete all as specified and directed. |
| 24 | M&L for machine cut kota stone slab as in steps 22-25mm thick over and incl 20 mm thick cement screed base in CM 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including ,moulding ,rubbing and polishing as in staircase complete all as specified and directed. (Rates are inclusive for screed base) |
| 25 | All as per item no 24 here in before but for skirting over 10mm thick rendering in CM (1:4) etc complete all as specified and directed. |
| 26 | M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX 1.4mm, weighing 0.24 kg/RM and 23.5mmX36.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified and directed. |
| 27 | S&F Non asbestos fibre cement building board 4 mm thick in ceiling fixed or laid/inserted to timber /GI/Aluminium frame work with screw complete all as specified and directed. |
| 28 | M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc complete all as specified & directed. |
| 29 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.53 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws complete all as specified and diected.Note - Independent Testing of galvalume sheet shall be carried out by the contractor from IIT/NIT and MTC for each lot at his own cost and records shall be verified by Engg-In-Charge and kept in records |
| 30 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.53mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks complete all as specified and directed.Note - Independent Testing of galvalume sheet shall be carried out by the contractor from IIT/NIT and MTC for each lot at his own cost and records shall be verified by Engg-In-Charge and kept in records |
| 31 | S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and directed. |
| 32 | S&F 1.00mm thick Mild steel, plain, black sheet in covering to door shutters; covering to door chowkhats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as reqd complete all as specified and directed. |
| 33 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, complete all as specified and directed. |
| 34 | M&L cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in coping, sides of paver block or chamferred edges and like complete all as specified and directed. |
| 35 | M&L for painting steel & iron surface with two coats of synthetic enamel paint over a priming coat of red oxide including preparation of surface all as specified and directed. |
| 36 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 37 | One light point/Ceiling fan/Exhust fan controlled by one, one way switch 5 Amps |
| 38 | one 5 Amps socket outlet on same board. |
| 39 | one 5 Amps socket outlet on independent board. |
| 40 | All as per item No 36 here in before but 2.5 Sqmm (nominal area) FRLSH cable PVC for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor green as colour for earth continuity all as specified and directed. |
| 41 | S&F Switch piano flush button single pole one way 5 Amps,working on 230 V, 50 Hz, AC supply complete all as specified and directed. |
| 42 | S&F socket outlet 2 in1, 3 pin,5 Amps flush type,universal working on 230 V, 50 Hz, AC supply complete all as specified and as directed. |
| 43 | S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universal working on 230 V, 50 Hz, AC supply complete all as specified and as directed. |
| 44 | S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal ,working on 230V,50Hz, AC supply complete all as specified and directed. |
| 45 | S&F Ceiling rose 3 terminals PVC/Polycarbonate, isolated body, ISI marked complete all as specified and directed. |
| 46 | S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed. |
| 47 | Supply and fixing in repair LED lights fitting 1x 20 W, 220V, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 48 | S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked) complete all as specified and directed. |
| 49 | S & F for Inverter LED Bulbs, 12 W, complete all as specified and directed. |
| 50 | S&F Energy saving new generation 10watts LED bulk head fitting IP-65 luminarie with Opel diffuser prewired with and necessary mounting arrangement provision of three core multistrandard copper conductor of size 23/0.193 from ceiling rose to fitting including lamp complete all as specified and directed. |
| 51 | Supply and fixing building security lights with new generation energy saving and environment friendly long life versatile pressure die cast aluminium IP65 roadway luminaries with high power LEDs as light source and exclusively designed polycarbonate cover along with electronic driver type fitting 35 watt LED capacity and including all accessories duly pre-wired fixing on new bracket with nut, bolts and washer as required at sight and description complete all as specified and as directed. |
| 52 | S&F in replacement of double door SPN DBs sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail Single phase and neutral confirms to IS : 13032-1991DB, 240 Volts suitable amps rated busbar 12 way complete all as specified and directed. |
| 53 | M&L for MCB single pole,6 to 32 Amp 240 volt C curve 10 KA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 50 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed . |
| 54 | S&F Miniature circuit breakers ISI marked 240 Volt, 50 Hz, double pole 40 Amps, breaking capacity 10 KA all as specified and directed. |
| 55 | M&L for Sub main wiring with 2 runs of 4 sqmm PVC insulated multi stranded FRLSH copper cable drawn through PVC concealed conduit of size not below 25mm size with all fixing accessories along with 1 run of 4 sqmm copper cable as earth continuity conductor complete all as specified and as directed.Note :- Two runs of 4 sqmm and one runs of 4 sqmm cable as earth along with PVC conduit will be measured as one length. |
| 56 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 4 core nominal cross section including testing complete all as specified and directed. |
| 57 | Excavation in trenches not exceeding .50 metre wide and not exceeding .45 metre in depth for cable trenches and getting out in soft / loose soil complete all as specified and as directed.NOTE – ITEM FOR RETURN FILLING AND REMOVING EXCAVATED MATERIAL ARE INCLUDED IN B/R PART. |
| 58 | Material and labour for Supplying and laying un-reinforced pre cast concrete cable cover class LV, Type - 1 , flate, size 250 mm x 150 mm x 40 mm complete all as specified and as directed |
| 59 | Material and labour for sand cushioning for protection of underground cable, consolidated and compacted with clean dry sand all as specified and directed by the Engineer-in-Charge. (Note : The depth of sand shall be measured after punning only) |
| 60 | M&L for laying GI tubing light grade 40 mm dia with all fittings for cable protection including GI clamps nut bolts and washer etc complete all as specified and directed. |
| 61 | Earthing complete with GI earth plate electrode 600mmX600mmX6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth wire of size 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of SSR Part-I connected to earthing testing point all as specified and directed including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm dia bore GI light grade as earth lead protection pipe, 50 mm thick RCC 1:2:4 type B-1 cover slab of size 300x300x50mm as earth pit cover reinforced with 8 mm dia TMT bars @ 10 cm C/C both ways and with handle made out of 10 mm dia bars, funnel, strainer, charcoal and testing on completion all as specified and directed.Note- Rate quoted deemed to be included excavation and earth work in any type of soil with PCC type C1 in pit PCC Cover & other arrangement complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender