Tender For Repair/Maint Of Lt Oh Line, Ug Line, Cables, Panels, Poles, Security Lights And Other E/M Items And Works At Manesar C , Dundahera Mil Stn And Indu Binola Under Age E/M Of Ge (South) Delhi Cantt-10
Tender Value
43 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
8 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Lt Oh Line, Ug Line, Cables, Panels, Poles, Security Lights And Other E/M Items And Works At Manesar C , Dundahera Mil Stn And Indu Binola Under Age E/M Of Ge (South) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Excavation, in trenches not exceeding 1.5 m wide and not exceedin 1.5 m in depth for laying of cable in any type of soil and getting out complete all as specified & as directed. |
| 2 | Excavation, in trenches not exceeding 1.5 m wide and exceedin 1.5 m but not exceeding 3.0 m in depth for laying of cable in any type of soil and getting out complete all as specified & as directed. |
| 3 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick all as specified & as directed. |
| 4 | Removal of surplus excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 5 | M&L for Sand cushioning to under ground cable with dry sand locally available 8cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified & as directed. |
| 6 | Supply and laying sub class ‘B’ bricks well burnt for cable protections laid flat with length equal to width of brick over cable perpendicular to length of cable complete all as specified and as directed. |
| 7 | M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate for foundation of pole & stay complete all as specified and as directed. |
| 8 | M&L PCC 1:3:6 type C 2 using 40 mm graded stone aggregate for filling of pole & stay complete all as specified and as directed. |
| 9 | M&L PCC 1:2:4 type B-2 using 20 mm graded crushed stone aggregate for copining of pole complete all as specified and as directed. |
| 10 | Taking down old unsv ACSR conductor of any size from poles incl aluminium binding wires,jumpering,bindings at insulators etc complete all as specified and as directed. |
| 11 | M & L for ACSR conductor of any type including stringing on LT poles complete including aluminium binding wires, jumpering, bindings at insulators etc complete all as specified and as directed. |
| 12 | M & L for galvanised steel wire 4 mm dia to be stringed as continuous earthing wire on over head LT lines complete all as specified and as directed. |
| 13 | S & F mild steel cross arm, bracings, supports , clamps and back plate fabricated from structural steel section, including nut , bolts , washers, welding , bendings cold or hot, drilling hole for both in any shape or size as indicated or directed and inclusive of one prime coat, one under coat and one finishing coat of paint incl taking down the old unserviceable MS sections complete all as directed. |
| 14 | M & L for galvanised stay strand size 7/4 mm complete all as specified and as directed incl taking down the old unserviceable stay wire. |
| 15 | M & L for stay assembly complete with accessories as shown in electrical plate No 1 (Loop type insulator, stay clamps, excavation and concrete only measured separately) using diameter of stay rod 16 mm and MS stay plate 230 mm x 230 mm including taking down complete all as specified and as directed. |
| 16 | Taking out old unserviceable ACSR conductor of any size from existing poles at various locations of OTM and perimeter of Manesar Army Camp tree distribued area incl aluminium binding wires,jumpering,bindings, insulators cross arms, bracings, supports , clamps and back plate stay wire etc complete all as specified and as directed. |
| 17 | Supply and laying jointing and testing of XLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area for following sizes, complete all as specified and as directed. (a) 10 Sqmm 2 Core. |
| 18 | (b) 16 Sqmm 4 Core. |
| 19 | (c) 25 Sqmm 3.5 Core. |
| 20 | (d) 35 Sqmm 3.5 Core. |
| 21 | (e) 50 Sqmm 3.5 Core. |
| 22 | (f) 70 Sqmm 3.5 Core. |
| 23 | (g) 95 Sqmm 3.5 Core. |
| 24 | (h) 120 Sqmm 3.5 Core. |
| 25 | (j) 150 Sqmm 3.5 Core. |
| 26 | (k) 185 Sqmm 3.5 Core. |
| 27 | (l) 240 Sqmm 3.5 Core. |
| 28 | (m) 300 Sqmm 3.5 Core. |
| 29 | (n) 400 Sqmm 3.5 Core. |
| 30 | Taking out old unsv feeder pillar panel and Supply, install and testing of outdoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated of 3.15 mm thick CRCA sheet, on frame of mild steel angle iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 480 Amps to supply load and 1 Phase + Neutral SPN Aluminium bus bars suitable for 100 Amps to security lights load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conductor wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs and cable glands complete all as specified and as directed. and also comprissing of following:- Incoming:- (i) MCCB 400A 04 pole - 36 kA 01 Nos, ICS=100%=ICU Out going :- (i) MCCB 200 A 04 pole - 36 kA 01 Nos, ICS=100%=ICU (ii) MCCB 100A 04 pole - 25 kA 01 No, ICS=100%=ICU (iii) MCCB 63 A 04 pole - 25 K 01 No, ICS=100%=ICU (iv) Copper bus bar suitable of capacityas per above description. (v) Digital Voltmeter (v) Digital Ammeter. Make: HPL/SEIMENS/L&T- 01 No (vi) R-Y-B Neon indicator lamp panel mounting type (set of 03 ) = 01 Set (vii) CT's 200/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (viii) Control wiring of suitable 4/6 sqmm copper wire for connecting above accessories-each job (ix) PCC Work for Panel foundation -Each job |
| 31 | Taking out old unsv feeder pillar panel and supply installation, commissioning and testing of LT panel, outdoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated out of 3.15 mm thick CRCA sheet, on frame of mild steel angle iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 400 Amps load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conductor wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs and cable glands complete all as specified and directed and also comprissing of following:- Incoming:- (i) MCCB 315 A 04 pole - 35 kA 01 Nos, ICS=100%=ICU Ougoing:-(ii) MCCB 100 A 04 pole - 25 kA, 02 Nos, ICS=100%=ICU (iii) MCCB 63 A 04 pole - 25 K 01 Nos, ICS=100%=ICU (iii) Copper bus bar suitable of capacity 480 A - set of 4 (iv) Digital Voltmeter (v) Digital Ammeter. Make: HPL/SEIMENS/L&T- 01 No (vi) R-Y-B Neon indicator lamp panel mounting type (set of 03 ) = 01 Set (vii) CT's 200/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (viii) Control wiring of suitable 4/6 sqmm copper wire for connecting above accessories-each job (ix) PCC Work for Panel foundation -Each job Please Enable Macros to View BoQ information |
| 32 | Taking out old unsv feeder pillar panel and supply installation, commissioning and testing of LT panel, outdoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated out of 3.15 mm thick CRCA sheet, on frame of mild steel angle iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 400 Amps load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conductor wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs and cable glands complete all as specified and directed and also comprissing of following:- Incoming:- (i) MCCB 315 A 04 pole - 35 kA 01 Nos, ICS=100%=ICU Ougoing:-(ii) MCCB 100 A 04 pole - 25 kA, 02 Nos, ICS=100%=ICU (iii) MCCB 63 A 04 pole - 25 K 01 Nos, ICS=100%=ICU (iii) Copper bus bar suitable of capacity 480 A - set of 4 (iv) Digital Voltmeter (v) Digital Ammeter. Make: HPL/SEIMENS/L&T- 01 No (vi) R-Y-B Neon indicator lamp panel mounting type (set of 03 ) = 01 Set (vii) CT's 200/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (viii) Control wiring of suitable 4/6 sqmm copper wire for connecting above accessories-each job (ix) PCC Work for Panel foundation -Each job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender