Tender For Special Repairs To Bldg No. Wl-10 (10 X Ors Md Accn) And Certain Connected Works At Dsc Centre, Kannur Under Ge (Army) Trivandrum
Tender Value
47.83 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
17 days left
EMD
95700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No. Wl-10 (10 X Ors Md Accn) And Certain Connected Works At Dsc Centre, Kannur Under Ge (Army) Trivandrum
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster any description, on brick/ concrete/ stone walls or in ceiling surfaces including raking out joints hacking for key, scrubbing down with water etc. and removing rubbish outside MD land complete all as specified and as directed. |
| 2 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 3 | M&L for 25mm thick PCC 1:2:4, type B1 using 20mm graded stone aggregate as in flooring or similar work complete all as specified and as directed. |
| 4 | M&L for glazed ceramic coloured tiles in vertical surfaces 350x 250x 7mm/ 450x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick rendering on stone/ brick masonry surfaces in cement mortar (1:3) complete all as specified and directed. |
| 5 | M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and as directed. |
| 6 | M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed. |
| 7 | M&L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces as in skirting, dado, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar (1:3) on wall surfaces complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 9 | Demolition of brickwork or stone/ boulder masonry built in cement mortar or cement lime mortar, including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and pre cast concrete articles and removing debris outside MD land complete all as specified and as directed. |
| 10 | M&L for Pre-Cast Cement Concrete block masonry type C1, 1:3:6 (using 20mm graded stone aggregate) with solid blocks exceeding 10 cm in width and setting in CM 1:6 complete all as specified and as directed |
| 11 | M&L for rendering in two layers as 10 mm thick with cement mortar (1:4) mixed with water proofing compound @ 3% by the weight of cement over rendering 10mm thick with cement mortar (1:6) on fair faces of brick work or concrete surfaces and finishing the surface fair and even complete all as specified and directed. Note: Water proofing compound will be measured and paid separately. |
| 12 | M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work/ PCC solid block masonry/ concrete surfaces, finished fair and even complete all as specified and directed. |
| 13 | Supply only liquid water proofing compound all as specified and directed. |
| 14 | Taking up or down 20 mm bore steel tubing and connections complete all as specified and directed. |
| 15 | Taking up or down 25 mm bore steel tubing and connections complete all as specified and directed. |
| 16 | S&F 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 including necessary fittings, fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed. |
| 17 | S&F 25 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 including necessary fittings, fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed. |
| 18 | S&F in repairs vitreous china wash down water closet pan, S and P trap (pedestal pattern), white, including fixing bolt, plastic water closet seat, white or black colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage etc. complete all as specified and directed. |
| 19 | S&F in repairs 10 Litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and including 32 mm bore PVC flush pipe complete all as specified and directed. |
| 20 | S&F in repairs wash basin, vitreous china (flat back), size 550 mm x 400 mm, white, including 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, CI brackets, PVC connections 15mm size with PTMT nuts and of length 450mm, 32 mm dia waste fittings, brass, chromium plated and 32 mm dia PVC waste pipe complete all as specified and directed. |
| 21 | S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 22 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 23 | S&F PVC connections 15mm size, 450mm length with 02 Nos PTMT nuts with washer etc complete all as specified and directed. |
| 24 | S&F looking mirror, size 600mm x 450mm, bevelled edge, selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 25 | S&F in repairs grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed. |
| 26 | S&F in repairs stop/ angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions and fixed for 15mm bore dia of pipe complete all as specified and directed. |
| 27 | S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 28 | S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 29 | S&F in repairs stop valve, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for unions or fixed for 15mm bore dia of pipe complete all as specified and directed. |
| 30 | Dismantling of cast iron or reinforced concrete drain pipes 75/ 110 mm dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 31 | S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, fixed to walls complete all as specified and directed. |
| 32 | S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, fixed to walls complete all as specified and directed. |
| 33 | S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, laid in trenches or on floors complete all as specified and directed. |
| 34 | S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints or jointing with solvent cement, laid in trenches or on floors complete all as specified and directed. |
| 35 | S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 36 | S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 37 | S&F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 38 | S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 39 | S&F 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed. |
| 40 | S&F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 41 | S&F PVC (SWR) junction, single (Single T) equal or unequal for 110mm bore dia pipe complete all as specified and directed. |
| 42 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 43 | S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 44 | S&F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed. |
| 45 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including taking down old gully trap complete all as specified and directed. |
| 46 | Cutting into existing manholes for connecting new drains, 100 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate, smooth finished, and reforming benching as required complete all as specified and directed. |
| 47 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 48 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 49 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) on floor surfaces complete all as specified and as directed. |
| 50 | S&F in repairs sink made of stainless steel 1mm thick for kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 51 | M&L for preparation of new plastered external wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 52 | M&L for preparation of new plastered wall surfaces and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification; two or more coats on new work; over a coat of chalk whiting complete all as specified and as directed. |
| 53 | M&L for complete removal of existing treatment on internal wall surfaces and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification; two or more coats; over a coat of chalk whiting complete all as specified and as directed. |
| 54 | M&L for complete removal of existing treatment on external wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 55 | Dismantling water tanks exceeding 500 Ltr not exceeding 1000 ltrs and removing to store complete all as specified and directed |
| 56 | S&F rotational moulded polyethylene water storage tanks of 1000 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 57 | S&F in repair ball valves for 20mm bore dia of pipe, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed. |
| 58 | Taking down shutters of any description not exceeding 1.0 sqm each; and refixing in the same opening after carrying out necessary repair, easing and adjusting complete all as specified and directed. |
| 59 | Taking down shutters of any description exceeding 1.0 sqm and not exceeding 2.0 sqm each; and refixing in the same opening after carrying out necessary repair, easing and adjusting complete all as specified and directed. |
| 60 | S&F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 61 | M&L for preparation of old surfaces of wood and wood based material any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 62 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floor finished even and rough to receive top layer complete all as specified and directed. |
| 63 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 64 | M&L for PCC coping 1:2:4 type B-1 (using 20 mm graded stone aggregate) cast in situ including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 65 | M&L for 18/19 mm prelaminated particle board interior grade, prelaminated on both sides, fixed with screws as in shutters/ shelves including necessary framework, with mild steel hinges of 50 mm, hasp and staple of 100 mm mild steel stove enamelled black type including bolt and hinges fixed to with screw, SS drawer handle and flush drop 75mm and ball catch magnet spring in each door shutter including dismantling of boarding of any description fixed in any position with screws complete all as specified and directed. |
| 66 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 67 | S&F anodised aluminium snap grid frame work (size of grid 605 x 605 mm) for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 68 | M&L for 4 mm thick non-asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws in ceiling flat or sloping complete all as specified and directed. |
| 69 | M&L for preparation of new ceiling surfaces and applying two coats of OBD over one coat of chalk whiting complete all as specified and as directed. |
| 70 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all specified and directed. |
| 71 | Taking down old and unserviceable distribution board any type including sheet metal enclosures, after removing all connections and making good the disturbed surface complete all specified and directed. Please Enable Macros to View BoQ information |
| 72 | Taking down old and unserviceable distribution board any type including sheet metal enclosures, after removing all connections and making good the disturbed surface complete all specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender