Tender For Construction Of Borewll, Installation Of Submersible Pump And Associated Works At 400Kv Substation, Srinagar (G)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
01 Dec 2026
21 days left
EMD
43000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Borewll, Installation Of Submersible Pump And Associated Works At 400Kv Substation, Srinagar (G)
BOQ
| Sl. No. | Item Description |
| 1 | Cost of Hydrogeological Survey required for submersible boring work inside the premises of 400kV Substation, Khandukhal, Srinagar Grahwal including the cost of required T&P and Engineer charges. |
| 2 | Boring, drilling bore well of required dia for casing/strainer pipe by suitable method prescribed in IS:2800 (Part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders: 300 mm dia |
| 3 | Development of tube well in accordance with IS:2800 (Part I) and IS : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully deveoped, measuring yield of well by \\"V\\" notch method or any other apporved method, measuring satic level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 4 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing /casing pipe, removable as per requiement, all complete for bore well of: 200 mm dia |
| 5 | Providing and fixing M.S. Clamp of required dia to the top of casing /housing pipe of tubewell as per IS :2800 (Part I), including necessary bolts & nuts of required size complete: 200 mm clamp. |
| 6 | Supply and installation 3 phase L&T/ havells make panel board containing contact relay, auto start ammeter, voltmeter, volt selector rotary on off switch lane, kit kat, HRC fuse, start/stop button, push button for volt meter, indicator, connector strip housing lock sheet metal housing for 7.5 to 25 HP pump including supply of all materials, labour and T&P including supply of all materials, labour and T&P etc required for proper completion of the work. |
| 7 | Providing & fixing of 7.5 HP, 415V AC three phase submersible pump & motor with a discharge of min. 100-150 LPM on a head 150 meter of KSB/kilosker make as approved by engineer-in-charge including all labour & T&P etc required for proper completion of work. |
| 8 | Supply and fixing flat submerisble cable of superior quality as directed by Engineer-in-charge (3.5C x 6.0) sq mm approved make including all material and T&P etc. complete. |
| 9 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats anticorrosive paint of apporved brand and manufacture, including required hire & labour charges, fittings & accessories all complete for all depths as per direction of Engineer in-charge 200 mm nominal size dia having minimum wall thickness 5.40 mm |
| 10 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats anticorrosive paint of apporved brand and manufacture, including required hire & labour charges, fittings & accessories all complete for all depths as per direction of Engineer in-charge 150 mm nominal size dia having minimum wall thickness 5.00 mm |
| 11 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats anticorrosive paint of apporved brand and manufacture, including required hire & labour charges, fittings & accessories all complete for all depths as per direction of Engineer in-charge 200 mm nominal size dia |
| 12 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats anticorrosive paint of apporved brand and manufacture, including required hire & labour charges, fittings & accessories all complete for all depths as per direction of Engineer in-charge 150 mm nominal size dia |
| 13 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer In-charge. |
| 14 | Providing & fixing safety pilot wire/steel rope (10 mm) with the submersible pump/motor complete in all respect as per the condition of site & as per the instruction of site incharge. |
| 15 | Making the Pulley system arrangement needed for lifting pump with the help of steel rope (whose one end is always tied with submersible pump) during the mantenance & repairing of work. Complete the work in all respect with required civil, welding, cutting etc. work. The cost of required material, labour and T&Ps are in scope of the contractor. |
| 16 | Supplying, connecting (with submersible pump), assembling and lowering in vertical position in bore well HDPE flexible pipes (material grade PE100, IS 4984) 63 mm dia, thickness min. 5 mm, round, black colour including all required fittings complete in all respect as per the condition of site & as per the instruction of site incharge. |
| 17 | Providing and fixing gun metal non return valve of apporved quality (Screwed end) : 65 mm nominal bore : Vertical |
| 18 | Providing and fixing gun metal non return valve of apporved quality (Screwed end) : 40 mm nominal bore : Horizontal |
| 19 | Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) : 40 mm nominal bore. |
| 20 | Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end) : 65 mm nominal bore. |
| 21 | Providing and fixing G.I pipes complete with G.I fittings including trenching and refilling etc : 65 mm dia nominal bore |
| 22 | Providing and fixing G.I pipes complete with G.I fittings including trenching and refilling etc : 40 mm dia nominal bore |
| 23 | Making proper earthing with the help of G.I. plate/sheet, coal, salt connecting with 4 mm G.I. wire complete in all respect as per the instruction of site incharge. |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 25 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender