Tender For Repair/Resurfacing To Road, Road Furniture, Road Marking & Path Zone B And C Area Of Age B/R-I Under Ge (C) Khadki
Tender Value
1 Crore
Estimated cost
Bid Submission
03 Dec 2026
17 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Resurfacing To Road, Road Furniture, Road Marking & Path Zone B And C Area Of Age B/R-I Under Ge (C) Khadki
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Repairs to pot holes any depth, not exc 2 Sqm each including sweeping free from dust and mud or water, scoring sunken surface in roads, paths etc least 25mm in depth, making good by applying tack coat at 5 Kg per ten sqm, putting in premixed bituminous macadam, well rammed and shield with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (including supply of premixed macadam, binder by using bitumen VG-30 and chipping) depth of pot holes exc 30mm including sand seal coat to seal top surface complete all as specified and directed by Engineer-in-charge. |
| 2 | Preparing black top surfaces by brushing with wire brushes for re-moving caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed by Engineer-in-charge. |
| 3 | M&L for applying evenly a tack coat with paving bitumen @ 2.5Kg/10 sqm (VG-10) with sprayer over existing black top surface complete all as specified and directed by Engineer-in-charge. |
| 4 | M&L for laying Premixed bituminous, macadam laid/rolled and compacted to required gradient and camber with VG-30 paving bitumen @ 4% by the weight of total mix (consolidated thickness 75mm thick or less or as required) complete all as specified and directed by Engineer-in-charge. |
| 5 | M&L for laying bituminous premix semi dense asphaltic concrete 30mm consolidated thickness by using VG-30 bitumen @ 5.5% binder content (minimum) by weight of total mix, with using asphalt mechanical mixer plant laid using mechanical pavers & consolidated with 8 to 12 tonne power road roller to required level gradient, camber and super elevation complete all as specified and directed by Engineer-in-charge. |
| 6 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed by Engineer-in-charge. |
| 7 | S&F in repairs cats eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instruction and to be fixed with Epoxy- Resin based adhesive or Special Hot Melt Bitumen adhesive avoiding nails etc complete all as specified and directed by Engineer-in-charge. |
| 8 | S&F in repairs solar cats eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Monocrystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed complete all as specified and directed by Engineer-in-charge. |
| 9 | S & F in repairs for yellow black ABS plastic road speed breaker size( L250X B365X h50 mm) including fixing with epoxy adhesive all as per manufactural instruction complete all as specified and directed by Engineer-in-charge. |
| 10 | S & F in repairs Convex Mirror of size 32 inch with height adjustable concreting pole of dia 3 inch fixed in PCC foundation 1:3:6 of size 30x30x45cm complete all as specified and directed by Engineer-in-charge. |
| 11 | S&F in repairs LED Kerb Stone of height 250-300mm, made of high grade HDPE material, shock resistance, Power 36v with combination of Red/White/Blue/yellow colour for installation embedded with cement concrete 1:2:4 alongwith locking keys complete all as specified and directed by Engineer-in-charge. |
| 12 | M&L for 100mm thick spread thickness moorum/ red bajri, spread, rolled and consolidated to gradient and camber as required complete all specified and directed. |
| 13 | Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in appron/floor complete all as specified and directed |
| 14 | M&L for 75 mm thick PCC (1:4:8) type D-2, using 40 mm graded stone aggregate as in sub base of floor and paving including tamping complete all as specified and directed by Engineer-in-charge. |
| 15 | M & L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engineer-in-charge. |
| 16 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engineer-in-charge. |
| 17 | M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over 20mm thick cement screed base (1:6) complete all as specified and directed by Engineer-in-charge. |
| 18 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engineer-in-charge. Note :-Reinforcement where provided shall be measured and paid seprately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender