Tender For Repair/Replacement Of Fencing Of Mt Section, Refuelling Section, Afnet Section Certain Portion Of External Fencing Of 727 Su, Firing Range And Other Places At Technical Area Under Ge (Af) Srinagar.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
20 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Fencing Of Mt Section, Refuelling Section, Afnet Section Certain Portion Of External Fencing Of 727 Su, Firing Range And Other Places At Technical Area Under Ge (Af) Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of old chain link fencing including flat iron, line wire, complete all as specified and as directed. |
| 2 | Dismantling of RCC posts or struts embedded in concrete, any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises ,complete all as specified and as directed. |
| 3 | Dismantling of RCC posts or struts embedded in natural ground, any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises ,complete all as specified and as directed. |
| 4 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not etc. 50m and making good surface, work in soft/loose soil, complete all as specified and directed. |
| 5 | M&L for plain cement concrete, 1:3:6, Type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 6 | S&F 10mm dia mild steel round bar Fe-410-w (grade E-250) quality as line wire for holding chain link mesh, complete all as specified and directed. |
| 7 | S&F MS flat iron clamp, angle posts and struts in fencing cutting tops to shape as directed, drilling holes, notching for wire etc. Flat iron fillets (For securing chain link fencing etc.) and similar work conforming to Fe-410-0, complete all as specified and as directed. |
| 8 | Supply only MS galvanised chain link fencing any size and dia of mesh, straining bolts, etc. including provision of binding wire & fixed to angle iron post, complete all as specified and directed. |
| 9 | Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc., complete all as specified and directed.Note: (i) Supply only fencing, will be measured and paid separately.(ii) Mild steel nut bolt, line wire and flat will be measured and paid separately. (iii) The weight of chain link fencing for per Sqm will be decided by the BOO, conved by the GE |
| 10 | S&F mild steel bolts screw (machine made) with hexagonal or square head at one end and screw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or square nut exceeding 10cm and not exceeding 15cm long and dia meter of shank 05 to 10mm, complete all as specified and directed. |
| 11 | S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, as in repair etc. (each line of wire to be measured), complete all as specified and directed. |
| 12 | Restringing and rescrubbing only Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, as in repair etc. (each line of wire to be measured), complete all as specified and directed. |
| 13 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and directed. |
| 14 | Preparation of old steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and directed. |
| 15 | Demolition of cement / lime concrete from sunken portion in ground floors and paving n exc 15cm thickness (below or above ground level) including surface finishes of any type such as Mosaic, terrazzo tile / tiles, complete all as specified and directed. |
| 16 | M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006, M-35 with grey cement and pigment over and including 75mm thick PCC 1:4:8, type D-2 (Using 40mm graded crushed stone aggregate) and including 40mm thick compacted bed of fine sand, complete all as specified and direction. |
| 17 | M&L for plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in edges of interlocking tiles /chequered tiles, roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed. |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 19 | M&L for mild steel framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 20 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality A, complete all as specified and directed. |
| 21 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 22 | Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 2,35,882.50 during AOC.(Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender