Tender For Special Repair To Employee Sick (Female) Room At Forth Floor Of Block-D In Igmc(Sh:- Construction of Toilet, Partition Work, Flooring, Ceiling, Painting And Distempering, Sanitary Installation Etc.)
Tender Value
5.26 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
4 days left
EMD
10540
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Employee Sick (Female) Room At Forth Floor Of Block-D In Igmc(Sh:- Construction of Toilet, Partition Work, Flooring, Ceiling, Painting And Distempering, Sanitary Installation Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead. For thickness of tiles above 25mm and upto 40mm |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 4 | Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within all lead (Frame work such as joists, beams to be measured and paid for separately) including carriage of materials in all leads and lifts |
| 5 | Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them within 20 metres lead |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand): 6 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts |
| 7 | Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20mm nominal size) complete including carriage of materials in all leads and lifts |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for all heights: Suspended floors, roofs, landings, balconies and access platform including carriage of materials in all leads and lifts |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bar |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement: 4 coarse sand) complete including carriage of materials in all leads and lifts |
| 11 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge |
| 12 | Making rounded/ half rounded nosing in granite/kota stone complete. 20mm.thick including carriage of materials within all leads and lifts |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) 2nd class deodar wood |
| 14 | Providing wood work in frames of false ceiling, partition etc. sawn and and putup in position including carriage of materials within all leads and lifts Second class deodar wood |
| 15 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Deodar wood wood 40 mm thick shutters |
| 16 | Providing and fixing 9mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including carriage of materials within all leads and lifts |
| 17 | Providing and fixing 12mm thick imported pine wood ceiling/ panneling with tongued and grooved jointing of standard quality ISI mark and approved shade and colour complete including carriage of material within all leads and lifts |
| 18 | Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately including complete including carriage of material in all leads and lifts |
| 19 | Providing and fixing 19mm thick commercial board proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts |
| 20 | Providing and fixing 19mm thick Commercial Board shutters for cup boards including fixing with nickel plated piano hinges with screws etc complete inciding carriage of materials with in all leads and lifts |
| 21 | Providing and fixing square edged cover fillets (beading) 19mmx6mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts |
| 22 | Providing and fixing 40x12mm hard Teak wood corner beading with wood screws in glazing patition etc including carriage of materials within all leads and lifts |
| 23 | Providing and fixing 40x12mm hard wood plain beading with wood screws in glazing patition etc including carriage of materials within all leads and lifts |
| 24 | Providing and fixing 4mm thick teak ply wood lining with butt jointing and nails etc. (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts |
| 25 | Providing and fixing Ess-Ess handles, ISI marked, of required colour or shade, with necessary screws etc. complete: 125mm complete including carriage of materials in all leads and lifts |
| 26 | Providing and fixing Ess-Ess handles, ISI marked, of required colour or shade, with necessary screws etc. complete: 150mm complete including carriage of materials in all leads and lifts |
| 27 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts |
| 28 | Providing and fixing 0.63 mm thick PGI sheet ceiling/lining of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts |
| 29 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm |
| 30 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 31 | Providing and fixing 5mm thick frosted glass panes in wooden door/windows and partitions etc. including glazing with wooden beads, putty, nails and all fittings complete, including carriage of materials in all leads and lifts |
| 32 | 15mm cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 |
| 33 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 34 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts |
| 35 | Wall painting with plastic emulsion paint (One or more coats applied on Old Work) of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface. including carriage of materials in all leads and lifts |
| 36 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/litre |
| 37 | Painting Wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 38 | Painting Wood work with Deluxe Multi Surface Paint of required shade One or more coat applied on old work of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 39 | Painting steel work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 40 | Providing melamine polishing two or more coats on new work (Two or more coats applied on wood and wood based surfaces) complete including carriage of materials in all leads and lifts |
| 41 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including trenching, refililing, cutting and making good the walls etc. 15 mm dia nominal bore complete including carriage of materials in all leads and lifts |
| 42 | Providing and fixing high pressure PVC (Finolex) type-B spigot and socket, waste and ventilating pipes including collar and clamps ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts (i) 110mm dia. |
| 43 | Providing and fixing PVC Finolex plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts (i) 110mm nominal size |
| 44 | Providing and fixing PVC Finolex door bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts (i) 110mm nominal size |
| 45 | Providing and fixing PVC Finolex type collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts (i) 110mm nominal size |
| 46 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.including carriage of materials within all leads an lifts 110 mm X 90 mm nominal diametre |
| 47 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement: 1 sand) (Seat and over to be measured and paid for separately):- Anglo Indian Universal closet including carriage of materials within all leads and lifts |
| 48 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including carriage of materials within all leads and lifts |
| 49 | Providing and fixing 550mmx400mm flat back vitreous China wash basin with pedestal and brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads and lifts |
| 50 | Providing and fixing stainless steel kitchen sink 610mmX510mm with bowl depth 200mm size with drainage board of approved make with C. I. or M. S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts |
| 51 | Providing & fixing 32mm dia, PVC waste pipe for wash basin or sink including carriage of materials within all leads and lifts |
| 52 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws etc. complete including carriage of materials within all leads and lifts |
| 53 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts |
| 54 | Providing and fixing 45cm length UPVC connection pipe with brass unions 15 mm nominal bore complete including carriage of materials within all leads and lifts. |
| 55 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials within all leads and lifts |
| 56 | Providing and fixing C.P. Brass Towel ring complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials within all leads and lifts |
| 57 | Providing and fixing looking mirror of size 600mmx450mm with plastic frame (superior quality) including backing support and fixing with screws etc. at site as directed by Engineer-in-charge including carriage of materials within all leads and lifts. |
| 58 | Providing and fixing 600mmx120mm acraylic glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts |
| 59 | Providing and fixing 3 in 1 angular corner acraylic glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden/rawl plugs with C.P. brass screws etc. complete including carriage of materials within all leads and lifts |
| 60 | Providing and fixing 15mm dia CP brass Sink mixer of approved quality complete including carriage of materials in all leads and lifts |
| 61 | Providing and fixing 15mm dia CP brass Wall mixer of approved quality complete including carriage of materials in all leads and Ifits |
| 62 | Providing and fixing 15mm dia CP brass Basin mixer of approved quality complete including carriage of materials in all leads and lifts |
| 63 | Providing and fixing 15mm dia CP brass Angle cock of approved quality complete including carriage of materials in all leads and lifts |
| 64 | Providing and fixing 15mm dia CP brass Bib cock of approved quality complete including carriage of materials in all leads and lifts |
| 65 | Providing and fixing 15mm dia CP brass Long body Bib cock of approved quality complete including carriage of materials in all leads and lifts |
| 66 | Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender