Tender For Construction Of Forest Guard Chowkies Ummedganj Pakshi Vihar Conservation Reserve, Kota
Tender Value
12.67 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
0 days left
EMD
25340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Forest Guard Chowkies Ummedganj Pakshi Vihar Conservation Reserve, Kota
BOQ
| Sl. No. | Item Description |
| 1 | Excavation by meachanical means (Hydraulic Excavator ) manual meansoverareas (exceeding 30 cm in depth 1.5m in widh as wellas 10sqm on plain) including disposal of excavated earth lead up to 50 m and lift up to 1.5 m disposed earth tobe levelled and neatly dressed ALL kinds of soil |
| 2 | P/L in position cements concrete including curing compaction etc complete in specified grade excluding the cost of centering & shuttering. All work up to plinth level ( I ) using 1:4:8 stone Agg. 40 mm nominal size() |
| 3 | (II) Using 1: 2 :4 stone agg 20mm nominal size ( crusher broken ) |
| 4 | Random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick walls in c.m 1:6 Foundation &plinth |
| 5 | Brick .masonry with F.P.S bricks of class designation 75 in super structure bove plinth level upto floor V level inall shapes and sizes in C,M .1:4 |
| 6 | Rough chisel dressed sand stone 35mm thick flooring of approved shade set over 20 mm thick base of cement mortar 1:6 and pointing with cement sand mortar1:3 with pigment to match the shade of stone with joint thickness up to 15 cm complete in all rspects i- mandana stone |
| 7 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 8 | Centering and shuttering with ply wood or steel sheets including strutting .propping bar cling both ways with wooden members and removal of form work up to floor Five level suspended floors, roofs. Landing .staircases cantilever, bands, coping bed plates anchor .blocks sills ,chajjas, lintel, beams plinth etc |
| 9 | Providing and fabrication reinforcement for RCC work including straightening , cutting bending , placing in position in binding (including cost of binding wire) all complete up to floor Five level cold twisted deformed bars (IS:1786) |
| 10 | Providing and laying in position specified grade of cemrnt concrete for R.C.C structural element upto floor Five level including curing compaction , finishing with rendering in cement sand mortar 1:3 and making good the joints and cost of plastizers excluding the cost of centering ,suttering and reinforcement forwalls (any thickness) attached pilasters. buttresses,plinth and string course.fillets, columns,pillars,piers, abutments,posts and struts etc i. M20 grade nominal mix/design |
| 11 | P/F M.S sheet 1mm thick single leaf door shutter in angle iron frame 35x35x 5 mmsuitabilly diagoonlly draced with 25x3mm flate iron above and below lock rail of size 50x5 mm beading extra including all fittings, as per direction of Engg in charge but Excluding cst of chowkhats including two coats of anti corrosive red oxide primer paint rate double Extra leaf shutters (shutter) |
| 12 | Supplying and fixing fixed wire gauge of 14mesh x 24gauges to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150 mm distance. |
| 13 | Randdom Rubble dry stone kharanja under floor |
| 14 | P/F1 st quality Mat &GLOSSY finished ceamic tile confirming to IS:13755 and IS: 15622 colour such as white,grey,ivory. Fume red brown. Light green light blue and other light shades in floor, steps,pillar etc laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile completw( includeing the cot of cement mortar bed 1:4 ) size600mmx600mm |
| 15 | Plaster on new surface on wall in cement sand mortar1:4including racking of joints etc complete fine finish I ,25 mm thick |
| 16 | Supplying and fixing in wall machine cut and polished stone shelves tends in cement mortar 1:3 with machine cut edges I sand or other approved stone, 50 mm thick |
| 17 | finishing of wall with water proofing cement paint of approved brand and or required shade to give an even shade including all scaffoldng I New work (Two or more coats- [email protected] /10sqmi- |
| 18 | wall painting with plastic emulsion pain of approved brand and manufacture togive an eve shade including all scaffolding i- Two or more cats on new work including prepartion of base with primer,putty,lippy etc. comlete in all ( respect, |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. I two or more coats on new work |
| 20 | Providing and fixing steel gate, grating, and grills made of angels,tees, squres bars flats or black pipe with holdfast and fittings complet as per design and drawing including cutting welding and fabrication with priming coar of red oxide |
| 21 | supplying and fixing fixed wire gauge of 14 mesh x 24gauge to the metel frame of rolled section by metel beading 20x3mm with suitable screw at not exceeding 150mm distance |
| 22 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:-Size 200x100x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 8mm ϕ @15 cm c/c bothways including shuttering complete in all respect. |
| 23 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 24 | P/F riged P.v.C pipe ( I.S;4985 mark)class II/(4kg/cm 2 approvedquality/make including joining the pipe with solvent cement rubber ring and lubricant i-110mm dia |
| 25 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: FOR one tank,1000 litres capacity. |
| 26 | p/f polyethylene-alumnium polyethylene (P.E-Al-pE) composite press pipeas per15450:2004 u.V stablised----------hot and cold water supply all spcially fitting of composite materiale.g elbow tees refilling and testing of joints completeas per direction of enginner encharge External work |
| 27 | 1216 (16mm OD) pipe |
| 28 | 1620(20 mmod) pipe |
| 29 | P/F wvc wash basin (1st quality I.2556 mark) of approved make with C.I. bracket duly painted 1no 15mm c.p piller cock I.s 8934 mark) &32mm C.P brass waste coupling of approved make P.V.C. waste nut 32mm complete including cutting &making good the wall, size-510mmx400mm |
| 30 | KITCHAN&LAB SINKS:1.38 P &F KITCHAN& LAB SINKS of approved make with c.l. brackets duly painted,40mm c.p. wasted coupling c.p.Brased chaun with rubber plug, 40 mm g.i. waste pipe up-to floor lavel completeincluding cutting and making god the wall & floor: 1.0 mmthik stainless steel AISI-304&13983-1994 kichan sink of approved make as per engineer-in-charge with large waste coupling overall size=22x18x7 ,bowl size=20x16x7 |
| 31 | P.& f . Bevelled edge mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in- charge complete with 6mm thik commercial ply base fixed to wooden screws & washers. size-600x450mmx4mm |
| 32 | p & f Bib Cock (IS:8931 Mark), Superior quality of approved make: Brass 400gm,15mm nominal bore. |
| 33 | p & f Full-way Valve (IS:778Mark) or wheel valve of approved make: Gun-metal 15 mm nominal bore. |
| 34 | wiring of light point/fan point/exhaust fan point/call bell point with1.5sq.mm nominal size f.R p,v.c insulated unsheated flexible copper conductor 1.1 k.v grade and 1.5 sq.mm nominal size fR p.v.c insulated unsheathed flexible copper eart conductor 1.1 kv grade (IS.694) in recssed ISI marked MMS (IS:9537 p-III) round tiles,1.2 mm thick Hot dipped Galvanized modular Box with earth terminal,10 A modular switch modular face plate with gired plate,3 pin ceilling rose/ holder/3 way connector,screws, macking connections testing etc. as required for spection of coppper conductor phenolic laminated sheets & electrical /wiring accessori refer chapter E-04,E-05 &E07 for additional technical parameters of product //work refer Annexure , 'A' |
| 35 | short point ( up to 3mtr) |
| 36 | medium point ( up to6 mtr) |
| 37 | long point(0 to10mtr)out site(2no each) |
| 38 | Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size 600x600 mm x6.mm by embody 3 to4 mtr belowthe groundlevel with 20 mmdia.G.I\\"B' class watering pipe, including all accessories like nut,bolt,reducer nipple wire meshed funnel,and Heav Proof Poly propy lne earth pit chamber with lockable jam free id suitable forsfe wrking load 5000kg or more of size Dia225 to260 mm , Bottom dia to 300 to330 . and and hieght 250 to 300 mm and embodyying the pipe complete with alternate layers salt and cock/charcoal.testing of earth resistance for value of 5 ogms or less as required 7 must record by engineer in chargeduring site visit and ensure to enter in measurement book ALL asper pre approved by Engineer in charge For additional technical parameter of produts/work refer Annexure'A' one earthingh for Building |
| 39 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & it's ISI marked (IS:14768 P-II 2003) accessories, round tiles,Hot Dipped Galvanized Modular Box of 1.2 mm thick with earth terminal, 10A Modular switch,3 pin ceiling rose / holder / 3 way connector ,Modular face plate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 40 | Medium point (up to 6 mtr.) |
| 41 | Short point (up to 3 mtr.) |
| 42 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & it's ISI marked (IS:14768 P-II 2003) accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSRshort point(up to 3 mtr.) |
| 43 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 44 | 2.x2.5sq.mm |
| 45 | 4x2.5sq.mm |
| 46 | Providing & Fixing of Recessed/surface mounting heavy duty Enclosure made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted complete with din rail making internal DB terminations with copper lugs, detachable gland plate, including making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure 'A' attached with this BSRSuitable for Six / Eight module for MCB/ RCCB |
| 47 | Providing & Laying XLPE insulated & P.V.C. sheathed Armoured Copper cable confirming to IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. 6.0 Sq. mm, 3 core |
| 48 | Providing & Fixing of BEE Star rated copper wounded with class of Insulation 'F', double ball bearing capacitor start, aluminium body & aluminium blade ceiling fan conforming to all the performance requirements laid down in IS 374:2019 with down rod up to 30 cm with secondary support safety cable ( steel rope) , cotter pin, shackle kit with 3 x 1.5 sq.mm pvc insulated flexible copper conductor and making connection testing etc. as required. 1200 mm Sweep BEE 3 Star rated (service value >=5.0 to< 5.5 ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender