Tender For Repair/Replacement To Tanks, Tank Staging, Tank Cleaning Of Billet Area, Messes And Technical Area Covering All Lodger Unit Under Aor Of Ge (Af) Srinagar.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To Tanks, Tank Staging, Tank Cleaning Of Billet Area, Messes And Technical Area Covering All Lodger Unit Under Aor Of Ge (Af) Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete including taking down of old lagging if required, complete all as specified and directed. |
| 2 | M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete including taking down of old lagging if required, complete all as specified and directed. |
| 3 | S&F in repairs 15mm bore steel warer tubes, 'medium grade', galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 4 | S&F in repairs 20mm bore steel warer tubes, 'medium grade', galvanised, with all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 5 | S&F in 500 liter capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed. |
| 6 | S&F in 1000 liter capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed. |
| 7 | S&F in repairs 15 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms), complete all as specified and directed. |
| 8 | S&F in repairs 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms), complete all as specified and directed. |
| 9 | M&L for cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity upto 500 ltrs and refixing the float valve and plugging wash pipe including disconnecting existing tank and refixing in position, complete all as specified and directed. |
| 10 | M&L for cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity exc 500 ltrs and upto & including 1000 ltrs and refixing the float valve and plugging wash pipe including disconnecting existing tank and refixing in position, complete all as specified and directed. |
| 11 | S&F in repairs 15mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 12 | S&F in repairs 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 13 | S&F SFRC manhole covers and frame medium duty of overal size 900mmX450mmX80mm thick, factory made and test load 10 tonnes (MD-10), strength as per IS: 1726-1991 to place over open drain in technical area complete all as specified by Engineer-in-Charge. |
| 14 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 15 | M&L for plain cement concrete, 1:4:8, Type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 16 | M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:4, Complete all as specified and directed. |
| 17 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, exceeding 200m thick (Horizontal or sloping), complete all as specified and directed. |
| 18 | M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 19 | Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, complete all as specified and directed. |
| 20 | M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 21 | M&L for 15mm thick cement plastering on fair faces in CM 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement but with using water proofing compound upto 12m height including taking down old plaster, complete all as specified and directed. (Note : WPC shall be measured and paid separately.) |
| 22 | Supply only integral water proofing compound, complete all as specified and directed. |
| 23 | Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint upto triple storey height, complete all as specified and directed. |
| 24 | Preparation of old decorated or unplastered surfaces of walls or concrete surfaces including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) and applying one coat of cement based paint over a coat of primer including preparation of surfaces on walls, complete all as specified and directed. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 26 | M&L for rolled mild steel work in Plates (plain or chequerred ) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 410-W (gde-E-250) Quality A complete all as specified and as directed. |
| 27 | M&L for mild steel framed work such as grills, gratings, gates etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; nosing, framework of water tanks, band, straps, wind ties and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 28 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 29 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 30 | M&L for 10 to 12 mm thick vitrified parking tiles in approved shade from meteor series, area of each tile exceeding 0.08 Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in matching coloured polymer cement based grout to match over and including 15 mm thick Screed bed or bedding layer in CM 1:6, complete all as specified and directed. |
| 31 | Preparation of old plastered /unplastered wall surfaces by washing down, brooming down, steel wire brushing and removing all grass, vegetation or shrubs from boundary wall/compound wall etc. and applying one coats cement base paint including scaffolding , complete all as specified and directed. |
| 32 | S&F in repairs PVC cover for water storage tank of any capacity, complete all as specified and directed. |
| 33 | S&F in repairs Urinal spreader of Brass/Chrome-Plated Spreaderfixing with 15 mm dia pipe. (Minimumweight 60gms) |
| 34 | S&F in repairs 32/40 mm dia bore PVC flexible pipe for wash hand basin / urinal, complete all as specified and directed. |
| 35 | S&F in repairs 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 90gms), complete all as specified and directed. |
| 36 | Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 1,95,407.60 during AOC.(Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender