Tender For Provn Of Certain Sanction Work In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi Cantt-10
Tender Overview
Project Description
Tender for Provn Of Certain Sanction Work In The Area Of Age B/R-I And Age E/M Under Ge (Central) Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar or cement lime mortar of any description including quoins, arches, pillars, etc., all as directed. |
| 2 | Demolition of cement ( Un-reinforced) in Ground floors and paving exe 15cm thickness (below or above ground level) including removal of rubbish out side complex (Defence land), complete all as specified. |
| 3 | Taking down chowkhat or frame not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified |
| 4 | Taking down shutter with chowkhat of any description exc 1.50 sqm but not exc 4 sqm and removing from site each complete all as specified and directed. |
| 5 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises |
| 6 | Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. |
| 7 | Demolition of reinforced cement concrete such as chajja,manhole cover parapet wall ,lintel up to 4.5 m span including hieght upto four storey building , in any position all as specified and as directed by Engineer -in-Charge. |
| 8 | Taking up or down steel tubing and connections, bore of tubing 15mm complete all as specified |
| 9 | Taking up or down steel tubing and connections, bore of tubing 20mm |
| 10 | Taking up or down steel tubing and connections, bore of tubing 40mm |
| 11 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified. |
| 12 | M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished een and smooth without using extra cement up to hieght of four storey ,including scaffolding complete. |
| 13 | M&L for rendering 15mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in multistorey building ,complete all as directed |
| 14 | M&L for preparation of newly plastered surfaces of wall and applying 2-3 mm thick birla wall care putty and apply two coat oil bond distemper over one coat of primer from the same manufacture complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered surfaces of wall and apply two coat of cement base paint over one coat of primer from the same manufacture complete all as specified and directed. |
| 16 | Complelte removal of existing old treatment on surface of walls with machenical grinder (machine) as per specification of manufacturer paints/OBDs complete all as specified and directed. |
| 17 | M& L for preparing the entire surface with applying 2-3 mm thick birla/ JK wall care putty on walls surface finished even and smooth complete all as specified and directed.Putty to be procured directly from manufacture.(Item is executed in stage and passed) |
| 18 | M& L for applying two coats of oil bound distemper on wall of old surface with roller brush complete all as specified and directed.(Item is executed in stage and passed) |
| 19 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm all as specified |
| 20 | S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 165x60mm(double frame) |
| 21 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 22 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type Skelton door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).Note:- Contractor will provide manufacturer test certificate alognwith screw out test certificate. |
| 23 | M & L for mild steel framed work framed work as in doors, grill or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (GdeE- 250) qualityA complete all as specified. |
| 24 | S&F fibre glass Reinforced Plastiic (FRP)door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be coverec with fibre glass from all sides . MS stay shal be provided at the bottom to steady the frame complete all as specified. |
| 25 | S&F FRP Door shutter shall 30mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000.complete all as specified |
| 26 | Supply and fix stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and directed. |
| 27 | S&F stainless steel of AE-SI 316 grade barrel tower bolt 200 mm long , extruded sections complete all as specified. |
| 28 | S&F stainless steel handle of size 200mm size long complete all as specified. |
| 29 | S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified. |
| 30 | S&F 100 mm long (size) butt hinges, stainless steel with brass/bronze hinge pin, complete all as specified. |
| 31 | Supply and fix 150mm mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding where ever necessary complete all as specified and directed |
| 32 | S&F of floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 33 | Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified |
| 34 | S & F in repairs looking mirror of size 600mm x450mm x5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 35 | Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors shall be painted with bituminous paint of approved quality,The pipes should not come in contact with lime mortar or lime concrete as pipes are affected by lime etc complete all as directed. Make Jindal/BST |
| 36 | All as per item No 35 above but 20mm dia. |
| 37 | All as per item No 35 above but 40mm dia. |
| 38 | Cuttting chases for concealed water tubing or concealed conduct wiring etc and making good cutting exc 10 cm not exc 20 cm grith in brick wall. |
| 39 | Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified. |
| 40 | Supply and fix in repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe ) complete all as specified and directed by Engr-in-Charge. |
| 41 | Supply and fix in repairs PVC low level white flushing cistern valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified. |
| 42 | Supply and fix in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified. |
| 43 | S & F in repair Stop Valve /gate valve 20 mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as specified. |
| 44 | Supply and fix in repairs angle valve/Concealed Stop cock fancy type, chromium plated brass, 15mm, complete all as directed. |
| 45 | S&F in repair PVC connection 15mm dia and 60 cms long with two nos of brass nuts and washers complete . |
| 46 | Supply and fix in repairs shower rose, chromium plated brass, fancy type, 125x125 mm, with or without swivel , any size, including fixing to steel pipe or union, complete all as directed. |
| 47 | Supply and fix in repairs 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified. |
| 48 | S&F in repair brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets, complete all as specified) |
| 49 | S&F in repair brass chromium plated soap dish, complete all as specified. |
| 50 | S & F glazed ceramic tiles in vertical surface,coloured, of size 600mm x 300mm/350X250/ 450X350x7 to 8mm thick onvertical surfaces such as dados,skirting etc., set and jointed with approved adhesive,including 10 mm thick rendering cement plaster in 1;4 CM and pointed in white cement with pigment to match all as specified . |
| 51 | All as per item no. 50 except on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:4, set and jointed in white cement with pigment to match all as specified and directed. |
| 52 | M&L cement concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in base of 25 mm thick, finished surface without using extra cement, complete all as specified.complete all as specified. |
| 53 | M & L for rectified coloured Non Skid ceramic tiles of size 400x400x 7-8mm as in floors, set and jointed in neat cement slurry as per manufacturers instructions and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:6, complete all as specified. |
| 54 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified.complete all as specified. |
| 55 | M & L for 20mm thick Black Granite stone work (table rubbed and polished) over 15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab mouldedand polished incl Screed bed CM 1:4 complete all as specified and as directed by the Engineer-in-Charge. |
| 56 | M&L Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 75 mm thick , 75cm wide as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement complete all as specied |
| 57 | M & L For form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed. |
| 58 | M&L for Reinforced cement concrete 1:2:4 Type B -1 (20 mm graded agg) in shelves & similar items complete all as specified and as directed by Engineer-in-Charge |
| 59 | S&F TMT steel bars of 10 mm dia and over,cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed by Engineer-in-Charge |
| 60 | Dismantling water tanks exc 500 n. exc 1000 Ltr |
| 61 | S&F for 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I® |
| 62 | S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 110mm mm dia ,in four storey building complete all as specified |
| 63 | S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 75mm mm dia ,in four storey building complete all as specified |
| 64 | S&F in repairs PVC (SWR) bends of any radius ( 110mm bore) including jointing with solvent cement complete all as specified |
| 65 | S&F in repairs PVC (SWR) junction double,(double T, 110 mm bore), equal or unequal, including jointing with solvent cement complete |
| 66 | S&F in repairs PVC (SWR) junction double,(double T , 75 mm bore ), equal or unequal complete, including jointing with solven cement. |
| 67 | S&F in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement |
| 68 | S&F in repairs PVC (SWR) vent cowl of 110 mm bore |
| 69 | S&F in repairs PVC (SWR) vent cowl of 75 mm bore |
| 70 | S&F in repairs PVC (SWR) branch piece,(75 mm bore) single (single Y) equal or unequal |
| 71 | S&F in repairs PVC (SWR) bends of any radius ( 75mm bore) including jointing with solvent cement complete all as specified Make prince |
| 72 | Supply & fixed in repairs Grating doom 125 mm dia with waste hole of PTMT (minimum weight - 40 gms). |
| 73 | M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straightor curved on plan exceeding 6 m mean radius all as specified and directed. |
| 74 | S&F Steel work in tubular trusses or frame, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, Note :- frame provide over chhajja upto four storey building using scaffolding . |
| 75 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steelsheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note :- steel sheet , provide over chhajja upto four storey building using scaffolding . |
| 76 | S & F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note :- steel sheet , provide over chhajja upto four storey building using scaffolding . |
| 77 | S&F Powder coated (50 micron thick,) aluminium frame for windows/ventilators with one or more rebats incl Allum grills, jointing cleats for fixing etc complete all as specified |
| 78 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) approved design/pattren with apporved standered section and fix to the existing window frame with C.P. brass/stainless steel screw @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standred section around the opening, all complete as per requirement and dirction of Engineer-in-charge |
| 79 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed |
| 80 | Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring |
| 81 | M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles for temp buildings/PMT Bldgs of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners or 3 to 4 mm GI hanging wire for temp Bldg length/ht as per site req ,6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge. |
| 82 | S&F 4mm thick pin headed glass (figured) panes used in anodised aluminium glazed/gauzed windows and ventilators shutters complete all as specified |
| 83 | Dismentling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings as in roof covering compete all as specified. |
| 84 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 85 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 86 | Excavation in trenches, any type of soil n exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, erlls, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out.complete all as specified directed by Engr-in-Charge. |
| 87 | All as per item No 86 but exc 1.5 mtr and n exc 3.00 mtr depth complete all as specified and as directed by Engineer in chrge. |
| 88 | Cement conc 1:4:8 type D-2 bed to 200 mm drain pipes incl packing under and haunching against the sides of pipe after they are late and tested for 150mm bore pipes. |
| 89 | Cement conc 1:4:8 type D-2 bed to 150 mm drain pipes incl packing under and haunching against the sides of pipe after they are late and tested for 150mm bore pipes. |
| 90 | S & F DWCPE (SN8) 180 (OD) /163 (ID) mm dia pipes Snap fit/Push fit Coupler with rubber ring/gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed Complete all as specified |
| 91 | S & F DWCPE (SN8) 200 (OD) /175 (ID) mm dia pipes Snap fit/Push fit Coupler with rubber ring/gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed Complete all as specified |
| 92 | Returning filling in incl spreading, leveling watering and well running in layers n.exc 25 cm.complete all as specified directed by Engr-in-Charge. |
| 93 | Removing excavated soil to a distance n. exc 50 mtr and depositing were directed at a level n. exc 1.5 mtr above the starting point.complete all as specified directed by Engr-in-Charge. |
| 94 | Cutting of exising 200 mm dia manholes for connecting new drains making good to pipe and rendering cutting out exising benching for and forming benching for and forming branch channel (1/2round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified directed by Engr-in-Charge. |
| 95 | Cutting of exising 150mm dia manholes for connecting new drains making good to pipe and rendering cutting out exising benching for and forming benching for and forming branch channel (1/2round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified directed by Engr-in-Charge. |
| 96 | Brick work sub class ‘B’ bricks state or curved on plan built in cement mortar 1:4 using old size bricks.complete all as specified directed by Engr-in-Charge. |
| 97 | All As per item no 96 before but except bricks |
| 98 | M&L for precast factory made manhole cover, area of each cover n.exc 0.60 Sqm, 100mm thick with SFRC concreting including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet complete all as specified. |
| 99 | M&L for precast factory made manhole cover, area of each cover n.exc 0.20 Sqm, 50 mm thick with SFRC concreting including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet complete all as specified. |
| 100 | M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper complete all as specified. |
| 101 | Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed. |
| 102 | S&F glazed Skelton shutter IInd class hard wood 30 mm thick rebated and prepared to received glass, gauge etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed. |
| 103 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 104 | M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified |
| 105 | Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt |
| 106 | M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth , complete all as specified. |
| 107 | M&L for rotational moulded polyethylene water storage tanks in repair white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene balldescription including fitting and fixtures complete all as specified. (ISI Marked) |
| 108 | S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed |
| 109 | S&F 25 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed |
| 110 | Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortar of any diameter incl bends. |
| 111 | Supply only for broken brick coarse aggregate n.exc 40mm deposited, spread and levelled in layers watered and rammed to a true surfaces complete all as specified. |
| 112 | M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410 -W (GdeE- 250) quality A all as specified and directed. |
| 113 | S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed. |
| 114 | Excavation in post holes (or similar holes) in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed by Engineer-in-Charge |
| 115 | M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates, 75mm thick in foundation filling and mass concrete all as specified and directed by Engineer-in-Charge. |
| 116 | M&L for Powder coated aluminium(minimum thickness of powdercoating 50 micron) work for doors,windows, ventilators and partitions with PVC sheet (sliding window with three track) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up thegaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 117 | S&F 4.8 mm thick sheet frosted glass, ordinary quality and glazing in Aluminium door with solar control files 50 micron in squares exc 0.5 Sqm each pane. |
| 118 | M&L for PVC insulation tjickness of PVC insullation panels 40mm with EPS stuck to 1mm plain PVC sheetsuitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing directed by Engineer-in- Charge |
| 119 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 120 | S&F factory made uPVC white colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 2.0 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made |
| 121 | M&L for 50mm thick PCC 1:3:6 type C2 using 20mm graded stone agg as in sub base complete all as specified.. |
| 122 | M&L for 22 to 25mm chequered ultra tiles over 15 mm thick screed bed in cm 1:6 and jointed and pointed in white cement mixed with pigment to match the shade of tiles of flooring all as directed. |
| 123 | S&F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew. |
| 124 | Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc to match the existing surface. |
| 125 | Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. |
| 126 | Taking down old submain wiring of any size, including coduit and make from the site complete all as specified. |
| 127 | Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified. |
| 128 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable unsheathed 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS unsheathed as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified. |
| 129 | All as per item No 128 above but one light /Ceiling fan/exhaust fan point controlled by one switch. |
| 130 | All as per item No 128 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board but not below the switch board of light points in same vertical plate.. |
| 131 | All as per item No 128 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 132 | All as item No-128 but with 2.5 sqmm single core FRLS copper cable. |
| 133 | All as per item No-1 but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4 Sqmm single core stranded copper cable for one power point on independent board complete. |
| 134 | M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.0 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4.0 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified |
| 135 | M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified. |
| 136 | M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified. |
| 137 | M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified. |
| 138 | M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified. |
| 139 | M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified. |
| 140 | M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6Sqmm size stranded conductor as earthwire.Note:- Two run of main wire PVC insulated FRLS 1100 volts unsheathed stranded copper conductor and one run of earth wire with one run of PVC conduit will be measured and paid in one length. |
| 141 | M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire Note:- Two run of main wire PVC insulated FRLS 1100 volts unsheathed stranded copper conductor and one run of earth wire with one run of PVC conduit will be measured and paid in one length. |
| 142 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed |
| 143 | Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-30 protection), mechanical impact strength IK - 07, with cement spill protector double door fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 63/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified Note :- MCCB & MCB will be measured & paid separately. |
| 144 | M&L in replacement MCCB 63 Amps, 415 volts, 16 KA , 4P, optium 2.0 adjustable thermal setting Ics=100% Icu as per IEC 60947-II suitable for isolation , fixed over load and fixed short sircuit setting complete all as soecified & as directed |
| 145 | Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete. |
| 146 | M&L MCB SPN 40 Amp \\"B \\" curve, 230 volts 10 kA complete all as specified and directed. |
| 147 | M&L MCB SP 6 to 32 Amp \\"B\\" curve. 230 volts 10 kA complete all as specified and directed. |
| 148 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 149 | Supply and fix LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 150 | Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP-65 Protection, System level efficacy of the Luminary is > 90 lumen/watts at L70 criteria, Power Factor > 0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-5700K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete. |
| 151 | Supply & Fixing repairs recessed mounting LED FLAT panel 2'x2' made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed. |
| 152 | S & F in replacement pressure die cast aluminium housing LED street light luminaires with IP-66 deg. of protection suitable for 35/40 watt LED fitting, Power Factor > 0.90 voltage range - 150 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 100 duly fixedsuitable size of GI pipe light grade including 32 X 5 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe, 40x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire. |
| 153 | Taking down carefully the existing ceiling fan of 1200mm from its position after disconnecting electric connection and deposits in MES Store all as specified and directed. |
| 154 | Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by BLDC technology, BEE 5 star rating for energy saving, down rod, electonic regulators & accessories, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep (against normal ceiling fan converted to BLDC ceiling fan) including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed. |
| 155 | S&f fresh air fan PVC body, air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete. |
| 156 | Taking down carefully the existing fresh air fan any type & size from its position after disconnecting electric connection and deposits in MES Store all as specified and directed. |
| 157 | Supply & Fixing in replacement modular mini AC box with MCB 20 Amp complete with metal box and 3 Pin, 15 Amps plug top complete all as specified and directed. Make : Indo Asian/Havells/Legrand/ABB Note : Rates are inclusive of cutting / chases for mounting Modular metal box concealed in wall and making good to the disturbed surfaces with OBD / colour wash / white wash and wall putty where ever is required. |
| 158 | S & F water heater storage type Geyser vertical type with suitable size of fastner and COPPER inner tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braided pipe og size 15 x 60 mm long with brass adopter for inlet and outlet water connection having adjustable knob for temperature control , digitial display for showing the temperature of geysers and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 2.0 KW with ISI marked suitable for hot and cold water and not less than 5 star rating, suitable for ,230 volt, 50 Hz electric supply complete all as specified and directed. |
| 159 | Taking down carefully the existing Old U/S Geyser capacity 25 Ltr its position after disconnecting electric & water connection and deposits in MES Store all as specified and directed. |
| 160 | Supply and fix 35/40 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100 lumen/watts. The color temperature is around 5700 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor >0.9, voltage variation range 150-270 V, THD<20%, High and low protection along with a surge protection of 2.5 KV including provision of suitable size GI I light grade pipe of suitable length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete. |
| 161 | S & F wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge. |
| 162 | Taking down carefully the existing Old U/S wall fan & fresh air fan r its position after disconnecting electric connection and deposits in MES Store all as specified and directed. |
| 163 | S&F LED light fitting 20 watt 240 volt decorative type with driver,holder including LED tube light connecting up with three core flexible cable cvopper conductor of suitable size from ceiling rose complette all as specified. |
| 164 | S&F Modular switch socket combination 6 pin 16 Amp 3 module complete. |
| 165 | M&L sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 20Amps complete with one single pole MCB 'C' series 20A capacity complete. |
| 166 | S&F LED light fitting 1x20 watts 220 Volts AC decorative type with driver,holder including LED tube light as per IS 10322 (Part 5) and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 167 | S&F LED light fitting mirror type with high out put diffuser, 2 feet 10 watt with driver,holder including LED tube light IS 10322 (Part 5) and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 168 | S&F in repair Sub main wiring with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories on surface of walls complete all as specified and directed. |
| 169 | Supply and fixing LED bollard light aluminium extrusion, opal, polycarbonate diffuser for spot free lighting having IP 65 protection complete suitable for B22 base 14 watt bulb including 14 watts LED bulb and making necessary electrical connections with suitable size copper multi stranded 1100 volts grade FRLS cable and grouting or mounted on PCC base of required size and ratio including nuts, bolts and washers etc as required at site all as specified and directed. |
| 170 | Supply and fixing and connecting LED post top light die cast aluminium housing spigot, powder coated top cover opal PC diffuser having IP 65 protection complete suitable for B22 base 14 watt bulb including 14 watts LED bulb including making necessary electrical connections with suitable size copper multi stranded 1100 volts grade FRLS cable and grouting with PCC base of required size and ratio including nuts, bolts and washers etc as required at site all as specified and directed. |
| 171 | S&F including connecting twin core cable 6 Sqmm PVC insulated heavy duty 1100 volts grade, aluminium conductor drawn through and including 25 mm dia non metallic rigid PVC conduit burried in ground including earth work not less than 30cm deep minimum and returning filling and removal of soil all as required at site alongwith conduit accessories all as specified and directed. |
| 172 | Supply and fixing LED luminaries 600mmx600mm 36watt 220v AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver,holders and LED lamp siutable for roof ceiling including connecting up with driver three core copper conductor cable of suitable size all as specified. |
| 173 | M&L Sheet metal enclosure for DBs when MCBs to be used 8 way double door 240 volt. |
| 174 | S&F MCB SPN 32 Amps 240 volts 10 KA. |
| 175 | M&L tube light grade galvanised with fittings complete to walls and ceiling or laid in floors 40mm dia. |
| 176 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender