Tender For Provn Of Toilet Near Bldg No P/699 Of Cook House, Special Repair To Toilet Block And Bathroom Near Bldg No A/4/138 (Or Living) Under Ge Panagarh
Tender Value
38.22 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
8 days left
EMD
76500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Near Bldg No P/699 Of Cook House, Special Repair To Toilet Block And Bathroom Near Bldg No A/4/138 (Or Living) Under Ge Panagarh
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed. |
| 2 | Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness of any description and in any position not otherwise specifically provided for all as specified and directed. |
| 3 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed. |
| 5 | Dismanting of wrought iron or mild steel work af any description not otherwise provided for complete all as specified and as directed by Engineer-in-charge |
| 6 | Surface dressing n.exc 15 cm deep in soft / loose soil all as specified including clearing away all grass vegetation, saplings, shrubs, brush wood, under growth, roots and trees n. exc. 30cm girth and removing rubbish upto a distance of 50 metre out of the periphery of the area complete all as specified and as directed. |
| 7 | Excavating in trenches , n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts, wells, cesspits ,manhole pier hole, laying of cables, pipes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any kind of soilNote : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/- will be charged to contractor. In this GE decision will be final, conclusive and binding. |
| 8 | Returning filling in soft /loose excavated soil including spreading leveling watering and well ramming in layers not exceeding 25 CM and all as specified and directed. |
| 9 | Removing excavated material (soil) n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed. |
| 10 | M&L for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 11 | M&L for pavings, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (ie 10% fly ash, 30% clinker and 60% stone dust ) laying in layers n. exc 10cm thick, watering, ramming and compacted with hand/power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engineer-in-Charge. |
| 12 | M & L for Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) as foundation and mass filling complete all as specified and as directed |
| 13 | M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 14 | M/L for Reinforcement cement concrete M-25 using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed |
| 15 | M/L for Reinforcement cement concrete M-25 using 20 mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed |
| 16 | M/L for Reinforcement cement concrete M-25 using 20 mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 17 | M/L for Reinforcement cement concrete M-25 using 20 mm graded crushed stone aggregate as in chajjas and similar work complete all as specified & directed by Engineer in Charge. |
| 18 | M&L for Design mix M-25, using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns, in roofs and in shelves and the like complete all as specified and directed. |
| 19 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 20 | M & L for TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 21 | S&F TMT reinforcement bar, conforming to Fe-500, 5mm dia and upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as binding with and including mild steel wire (Annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 22 | M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 23 | M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface of concrete Complete all as specified and directed. |
| 24 | M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to chajja and similar work including edges for rough finished surfaces complete all as specified and as directed. |
| 25 | M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface of concrete, complete all as specified and directed. |
| 26 | M&L for Steel Centering and shuttering including strutting, propping etc. and removal of form to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), for fair finished surface of concrete, all as specified and as directed. |
| 27 | M&L for use and waste of fair finish formwork for side of slab exc 10cm but n.exc 20cm thick complete all as specified and directed. |
| 28 | M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 29 | M/L brick work with fly ash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM 1:4 complete all as specified and directed. |
| 30 | M&L for brick work with fly ash bricks old size, straight or curved on plan to any radius,in half brick walls built in cement mortar 1:4 complete all as specified and directed. |
| 31 | M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete surfaces finished fair and even, mixed wth water proofing compound admixture (if directed) as per manufacturer's instruction, complete all as specified and directed.Note :- WPC will measuered and paid separatly under relevant item of schedule. |
| 32 | M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall finsihed fair and even complete all as specified and directed. |
| 33 | M&L for Rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces of ceiling finsihed fair and even complete all as specified and directed. |
| 34 | Supply only intergral water proofing compound (liquid admixture) complete all as specified and directed. |
| 35 | M&L for grading roof in cement mortar 1:3, 25mm thick in edge and 50mm thick in ridge including necessary curing complete all as specified in SSR Part I clause No 11.42.2 |
| 36 | M & L for providing water proofing treatment with a layer of APP based polymeric membrane, 3 mm thick (minimum), weighing not less than 3.60 kg/Sqm reinforced with polymer non woven fabric (weighing not less than 160 gm/ Sqm) shall be applied over one coat of cold bituminious primer @ 0.40 ltr/ Sqm ( membrane shall be laid using butane torch and sealing all joints etc, complete all as specified and directed .( Note: The overlaps shall be of minimum 75 mm on longitudinal direction and 100 mm on transverse direction) complete all as specified and directed. |
| 37 | M&L one coat of aluminium paint over APP membrane complete all as specified and directed. |
| 38 | Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified. |
| 39 | Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified. |
| 40 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 41 | S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, in opening as per specification & drawing complete all as specified and as directed. |
| 42 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing. |
| 43 | S&F Factory made solid moulded PVC door shutter 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurathane painted on the front face & 2 mm thick plain colour PVC sheet on back face with particle face supply & fixing on frame, as per specification & drawing complete all as specified and as directed. |
| 44 | S&F Powder coated aluminium (miimum thickness of powder coating 50 micron) work for doors, windows, ventilators frame and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge |
| 45 | S&F Sheet glass 3 mm thick, ordinary quality & glazing with oil putty in square but n.exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 46 | S&F stainless steel Butt hinges 100mm size, medium weight, complete all as specified and as directed. |
| 47 | S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed. |
| 48 | S&F extruded Aluminium alloy handles 150mm size, cast type, anodised complete all as specified and as directed. |
| 49 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 50 | M&L 100mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete all as specified and directed. |
| 51 | M&L for 50 mm thick PCC 1:2:4, type B1, (using 20 mm graded crushed stone) , as in sub base for receiving floor finish with nominal reinforcement all as specified and directed. Reinforcement will be measured and paid seperately |
| 52 | M&L cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate 40 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed. |
| 53 | M&L non skid ceramic coloured tiles 7mm to 8mm thick, light shade (square or rectangular) area of each tile 0.18 sqm but not exceeding 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified. |
| 54 | M&L non skid ceramic coloured tiles 7mm to 8mm thick, light shade (square or rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified. |
| 55 | M&L for glazed ceramic colour joint free tiles tiles in verticle surface exc 0.42 Sqm but n. exc 1.00 sqm set and jointed in neat cement slurry over 10 mm thick 1:4 cement mortar plaster and pointed in coloured cement to match complete all as specified and directed. |
| 56 | M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.® complete all as specified and directed. |
| 57 | Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc for 15 mm bore pipe complete including stacking aside for reuse and removal of unserviceable items from site complete. |
| 58 | Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc for 20 mm bore pipe complete including stacking aside for reuse and removal of unserviceable items from site complete. |
| 59 | S&F 16 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 60 | S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 61 | S&F Stop valves 15mm dia CP fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 62 | S&F in repair fancy type 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for iron pipe complete all as specified and as directed. |
| 63 | S&F in repair Stop valve cast copper alloy screwed down high pressure with capston headed handle chromium plated concealed type screwed both ends for iron pipe 15 mm bore or for unions complete all as specified and as directed. |
| 64 | S&F Deck mounted high neck pillar tap for table top wash basin screwed down high pressure, complete all as specified and as directed. |
| 65 | S&F in repair Pillar taps (Swan Neck)fancy type 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 66 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and as directed. |
| 67 | S&F CP Bib taps 15mm dia, with fancy handle, screwed down, screwed for iron pipe or for brass ferrule, fency type and fixed complete all as specified and directed. |
| 68 | S&F in repair fancy type C.P bib taps cast copper alloy with capston headed handles, screwed down screwed for iron pipe 15 mm bore or for brass ferrule complete all as specified and as directed. |
| 69 | S&F Ivory table top wash basins of size 550 x 400 x 160 mm complete all as specified and as directed. |
| 70 | S&F in repair Ivory table top wash basins of size 550 x 400 x 160 mm complete all as specified and as directed. |
| 71 | S & F Vitreous China Urinal, Half stall type, white/coloured (excluding flushing cistern, flush pipe and waste pipe) including providing fixing plugs bedding urinal against wall etc all as specified and directed . |
| 72 | S & F in repairs Vitreous China Urinal, Half stall type, white/coloured (excluding flushing cistern, flush pipe and waste pipe) including providing fixing plugs bedding urinal against wall etc all as specified and directed . |
| 73 | S & F in repairs vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing , connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 74 | S & F vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing , connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 75 | S & F in repairs vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing , connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 76 | S&F in repairs PVC low level flushing cistern, 10 litres capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, flush pipe etc complete & connecting to WC complete. |
| 77 | S&F in repairs jet spray (stainless steel) with hose& hook complete all as specified and as directed. |
| 78 | Supply and fixing in repair 10mm thick curved shape glass partition of selected quality frosted / pin headed glass as in partition or urinal partition of required size including stainless steel holding brackets and stainless steel screws to secure complete all as directed by Engineer-in-charge |
| 79 | S&F in repairs health faucet chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and length 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed. |
| 80 | S&F in repairs SS toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 81 | S&F in repair SS soap dish, any type fixed to plugs chromium plated brass screws complete all as specified and as directed. |
| 82 | S&F in repair corner glass shelf (medium) 225 x 225 mm complete all as specified and as directed. |
| 83 | S&F in repair SS Towel rack 600mm (24\\") complete all as specified and as directed. |
| 84 | S&F Tubular towel rail, 20mm dia, D type, brass chromium plated, 60cm long between flanges complete all as specified and directed. |
| 85 | S&F in repairs tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets. complete all as specified and as directed. |
| 86 | S&F frameless bevelled edge mirror 5mm thick fixed to wall with chromium plated brass screws and cup washers. Make of glass : Modiguard/Saint Gobain |
| 87 | S&F in repairs frameless bevelled edge mirror 5mm thick fixed to wall with chromium plated brass screws and cup washers. Make of glass : Modiguard/Saint Gobain |
| 88 | S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 89 | S&F in repair chromiuim plated Swivel shower roses with shower arm, 125 mm size including fxing to steel pipe or union etc complete all as specified and as directed. |
| 90 | S&F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed. |
| 91 | S&F in repairs PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed. |
| 92 | S&F in repair grating doom 125mm dia with waste hole of PTMT minimum weight 40 Gms complete all as specified and as directed. |
| 93 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed. |
| 94 | M&L for 75 mm thick cement concrete M10 (Nominal Mix) with 40mm graded crushed aggregate finished even and fair laid to a slope of 1 in 12, laid in alternate bays, each bay not exceeding 3 m length with joint filled with bituminous mastic filling comprising a mixture of 1 part of heated Industrial bitumen 85/25 grade and two parts of heated sand as in plinth protection complete all as specified |
| 95 | M & L for preparation of old painted Puf panels surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint(gun spray) complete all as specified and directed. |
| 96 | M&L for preparing of old steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying TWO coat of synthetic enameled paint complete all as specified and as directed. |
| 97 | M&L for preparing of new steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enameled paint over a coat of Red oxide zinc chrome primer zinc chrome complete all as specified and as directed. |
| 98 | M&L for treatment of wall & applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 , alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives@ 1.43 litre/10sqm over and including priming coat of alkali and fungal resistance exterior primer applied @ 0.90 litre/10 sqm including a coat of putty 1 mm thick plastered surface to prepare the surface even and smooth for smooth finish over new surfaces complete all as directed by Engineer in Charge |
| 99 | Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer over plastered surfaces of walls complete all as specified . . |
| 100 | M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed. |
| 101 | M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as specified and directed. |
| 102 | Taking down PVC rain water pipe any size or pattern including all fittings all as specified and directed. |
| 103 | S&F 110mm bore PVC (SWR) pipes, type B single socketed in any length with rubber ring joints fixed to wall/laid in floor complete all as specified and as directed. |
| 104 | S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 105 | M&L for PCC 1:3:6 type C1 using 20mm garded stone aggregate as in surface channel all as specified and directed. |
| 106 | M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. |
| 107 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, benching. Hauncing etc finished even and smooth complete all as specified and directed. |
| 108 | Material and labour for cement concrete bed to drain pipe for 150mm bore of pipe including forming cradles in Cement concrete 1:3:6 Type C2 complete all as specifiedand and as directed. |
| 109 | Supplying and laying of PVC underground drainage sewer system pipe bearing 160 mm dia SN 4 including jointing with couplar, bend tee as per site requirement complete laid in trenches or floors complete all as specified and directed. |
| 110 | M&L RCC 1:2:4 type B1 using 20mm stone aggregate as in preacast man hole cover slabs set in CM 1:6 complete all as specified and directed. |
| 111 | Cutting into existing manholes for connecting new drains 15mm bore ,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required. |
| 112 | M and L for MS angle iron / Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc confirming to Fe 410-W (Gde- E- 250) quality-B complete all as specified. |
| 113 | S&F in repair Turbo ventilator SS built with vane ticknes 0.9mm , 38 nos aprox with ball bearings, turbine dia 760mm with bottom ring dia 600mm , FRP Base plate 2mm thick clear 1.02mtr wide and 1.65 m long matching the profile of existing sheet incl cutting and fixing on existing roof sheet, weight approx 8.0 Kg complete all as per manufacturer instructions and as directed by Engr In Charge. |
| 114 | M&L Sand filling under floors or in foundations including watering and consolidaion, all as specified and as directed. |
| 115 | M&L for pre-polished Machine pressed precast concrete interlocking paver block (coloured) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, complete all as specified and as directed. |
| 116 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including marking joints with or without grooves (thickness of joints except at sharp curve shall not more that 5mm), including making drainage opening wherever required complete as specified and as directed. |
| 117 | Taking down carefully aluminium/Copper conductor point wiring (light , fan, socket or powr) complete including fittings such as switches, ceiling rose, pendents, regulators sockets etc and removing (except those to be reused shall be kept in safe custody at the site) and making good disturbed surfaces of walls, floors etc tomatch with the existing completeall as specified and directed. Please Enable Macros to View BoQ information |
| 118 | Taking down carefully aluminium/Copper conductor point wiring (light , fan, socket or powr) complete including fittings such as switches, ceiling rose, pendents, regulators sockets etc and removing (except those to be reused shall be kept in safe custody at the site) and making good disturbed surfaces of walls, floors etc tomatch with the existing completeall as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender