Tender For Repairs To Hardstanding, Deck Slab, Parking Area And Service Trenches At Naval Wharf And Surrounding Areas Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram
Tender Value
38 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
18 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Hardstanding, Deck Slab, Parking Area And Service Trenches At Naval Wharf And Surrounding Areas Of Age B/R-Ii Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 sqm and n.exc 4 sqm each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 sqm each complete all as specified and directed. |
| 3 | Taking down shutters exe 1 sqm but n exc 2 Sqm each complete all as specified and directed. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 6 | S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 7 | S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene asket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing/ paneling, C.P. brass/ tainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 8 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 9 | Providing and fixing factory made uPVC white colour Sliding window area not exceeding 2 sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 10 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 11 | S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and directed. |
| 12 | S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete all as specified and directed. |
| 13 | S&F Aluminum anodized barrel bolt of extruded section 150mm long complete all as specified and directed. |
| 14 | S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed. |
| 15 | Dismantling of cast iron/PVC pipe any dia and any shape incl bends/branch pieces jointed in cement mortar and taking out if required complete all as specified and directed. |
| 16 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed. |
| 17 | S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 18 | S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified and directed. |
| 19 | S&F for 110mm dia PVC (SWR) branch piece single (Single T ) equal or unequal complete all as specified and directed. |
| 20 | S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed. |
| 21 | S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed. |
| 22 | S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and directed. |
| 23 | S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius complete all as specified and directed. |
| 24 | S&F for 75 mm PVC (SWR) branch piece, single (SingleT ) of radius equal or unequal complete all as specified. |
| 25 | S&F for 75 mm PVC (SWR) branch piece, single (Single Y) of radius equal or unequal complete all as specified . |
| 26 | S&F for 75 mm PVC (SWR) vent cowl complete all as specified. |
| 27 | M&L for 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified. |
| 28 | S&F in repairs vitreous china ware wash hand basin white flat back of size 550x 400 mm with pedestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and directed. |
| 29 | S&F in repairs under counter wash basin vitreous china ware white in colour including brackets, waste fittings, and all necessary inlet, out let connections complete all as specified and directed. Make : Jaquar cat No FNS WHT 40701 or equivalent |
| 30 | S&F in repairs counter top wash basin vitreous china ware white in colour including brackets, waste fittings, and all necessary inlet, out let connections complete all as specified and directed. Make : Jaquar cat No JDS WHT 25907N or equivalent |
| 31 | S&F in repairs 15 mm bore auto closing pillar taps with 65mm ext body , cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts complete all as specified and directed. Make :Jaquar Cat No. PRS-031L65 or equivalent |
| 32 | S&F in repairs vitreous china ware wash down white water closet pan with UF soft close slim seat cover including connecting to drain and flushing pipeof size 360 x500x335mm complete all as specified and directed. Make : Jaquar Cat No KUS-WHT-35953814UFSM or equivalent |
| 33 | S&F in repairs UF soft close slim seat cover including necessary fittings to existing WC complete all as specified and directed. |
| 34 | S&F in repairs vitreous china ware urinal with aerator including connector pie and connection to drain complete all as specified and directed. Make :Jaquar Cat No URS-WHT-13253N or equivalent |
| 35 | S&F in repair single piece concealed cistern including cutting of tiles and repairing to the damaged tiles as before complete all specified and as directed. Make : Jaquar cat No JCS-WHT-2431FP or equivalent |
| 36 | S&F in repair CP Control plate for concealed flushing cistern including fitting and repairing to all around tiles complete all specified and as directed Make : Jaquar cat No KUBIX-JCX-CHR-352415 or equivalent |
| 37 | S & F in repairs Brass chromium plated towel ring with round flange complete all as specified and directed. Make : Prayag Cat Part No. BA-11 |
| 38 | S&F in repairs Brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange complete all as specified and directed.Make : Prayag Cat Part No. BA-70 |
| 39 | S&F in repairs Hand shower (health faucet) with 8mm dia & 1.0mtr long flexible tube with wall hook complete all as specified and directed. Make : Prayag Cat Part No. BEA-41 |
| 40 | S&F in repairs looking mirror bevelled edge of selected quality glass, mounted on 6mm thk AC bldg board or commrcial ply wood & fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 41 | Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and directed. |
| 42 | Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and directed. |
| 43 | S&F 20 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 44 | S&F 25 mm dia bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 45 | S&F in repairs for providing 25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed. |
| 46 | Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge. |
| 47 | Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and as directed. |
| 48 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified and directed. |
| 49 | M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4, complete all as specified and directed. |
| 50 | Ditto all as per item No 49 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete complete all as specified and directed. |
| 51 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and directed. |
| 52 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 53 | Ditto all as per item No 52 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified and directed. |
| 54 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 55 | Ditto all as per item No 54 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3, complete all as specified. |
| 56 | M&L glazed ceramic coloured tiles as in vertical surfaces of size 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match incl 10 mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 57 | M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete all as specified and directed.Note : Colour of granite shall be as approved by Engr-In-Charge |
| 58 | S&F in repairs to Brass chromium plated 32mm dia bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 59 | M&L for 18-19mm thick Decorative choice prelaminated HDF boards (fire & water proof) of as in CB, cabinet, shelves etc including auto hinges ss grade AISI-316 and handle & the like etc complete all as specified and as directed. Note: Shade of board will be finillized by Engr-In-Charge. |
| 60 | Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 61 | Supply only plain sheet glass 5.5 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum Door shutter exc 0.5 Sqm in each pane complete all as specified and directed. |
| 62 | S&F Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed |
| 63 | Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 64 | S&F Prelaminated particle board 12 mm thick, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 65 | S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed |
| 66 | Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. |
| 67 | Supply and fix aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. |
| 68 | S&F Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 69 | S&F in repairs aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 70 | Dismantling plain or corrugated steel sheeting any gauge, thickness including similar pattern roof coverings complete all as specified and directed. |
| 71 | S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as specified. |
| 72 | S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws as specified. |
| 73 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-w.(Gde-E-250 ) quality A complete all as specified and as directed. |
| 74 | M&L preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 75 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 76 | Demolition of cement concrete un-reinforced in any position and paving not exc 15cm thick above or below ground level complete all as specified and as directed. |
| 77 | M& L for plain cement concrete type A-1 (1:1.5:3) (Using 20 mm graded stone aggregate) as in hard standing finished with even and smooth with using extra cement including use and waste form work complete all as specified and directed. |
| 78 | Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' complete all as specified and directed. |
| 79 | Finishing surface to concrete roads, pavements, by brooming complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender