Tender For Addition/ Alteration And Special Repairs To Bldg No P-1 (Hill View) At Ancom Under Ge Haddo, Sri Vijaya Puram
Tender Value
43.70 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
19 days left
EMD
87400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition/ Alteration And Special Repairs To Bldg No P-1 (Hill View) At Ancom Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 2 | M&L for Vitrified ceramic coloured tiles (of approved light shade) of size 600x 600mm, 9 to 10 mm thick in floor, set & jointed in neat cement slurry including a layer of screed bed 15mm thick 1:4 and pointed in coloured cement to match the shade of tiles over cement screed bed all as specified |
| 3 | M&L for light shade vitrified ceramic tiles minimum 8mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm (600x600mm) in vertical surfaces such as skirting, dados and riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed of cement mortar 1:3 complete all as specified and directed |
| 4 | M&L for Non Skid coloured ceramic tiles (300x300mm) 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed. |
| 5 | M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7mm/ 300x450x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:3 complete all as specified and directed. |
| 6 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 7 | M & L for hardcore of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface of broken stone or boulders |
| 8 | M&L for 100mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in path finish the top surfaces even and rough to receive top layer complete all as specified and directed |
| 9 | M&L chequered Cement concrete tiles 30cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments , incl CM (1: 4) 20 mm thick screed bed all as specified and directed by Engr-in-Charge. |
| 10 | Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed |
| 11 | M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 all as specified |
| 12 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed |
| 13 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed |
| 14 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws as specified |
| 15 | M&L plain aluminium flat section not less than 0.68 Kg per RM as in wind tie fixed with aluminium self tapping screws complete all as specifed |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 17 | S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A |
| 18 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 19 | M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 20 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 21 | M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified |
| 22 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of water proofing compound, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately) |
| 23 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed |
| 24 | M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed |
| 25 | M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed |
| 26 | M&L for complete removing of existing treatment and applying two coats of oil bound distemper of approved tint over a coat of average 2mm thick wall care putty on ceiling after complete removal of existing treatment complete all as specified and directed |
| 27 | S&F factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows and other frames/ chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/Cum, screw withdrawl strength of 2200N (face) and 1100N (edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for separately)Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 28 | S&F Factory made single extruded WPC (Wood PolymerComposite) UV coated solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60.(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm², modulus ofelasticity 850 N/mm² and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunkS.S screws, in kitchen cupboards and room wardrobes shutter all as per direction of Engineer. Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made) |
| 29 | M&L for anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete as specified |
| 30 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions ofEngineer-in-charge. |
| 31 | S&F powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed |
| 32 | S&F 100mm size stainless steel butt hinges medium weight complete all as specified |
| 33 | S&F 125mm size extruded aluminium alloy handles, fabricated type, anodised all as specified |
| 34 | S&F 150mm aluminium, anodised, barrel tower bolts of extruded section all as specified |
| 35 | S&F 250mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate |
| 36 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate |
| 37 | S&F sheet glass 5.5mm thick ordinary quality and glazing with aluminium glazing clip in aluminium door/window/ventilator shutter not exc 0.5 Sqm in each pane |
| 38 | S&F 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified |
| 39 | S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples all as specified and directed |
| 40 | S&F sheet glass 5.5 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter exc 0.5 Sqm in each pane |
| 41 | S&F sheet glass 4 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window/ventilator shutter not exc 0.5 Sqm in each pane |
| 42 | Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 43 | Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed |
| 44 | Dismantling PVC water tanks exc 500 Ltr but n. exc 1000 Ltr capacity and removing to store complete all as specified |
| 45 | S&F double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed |
| 46 | Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 47 | Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 48 | S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 49 | S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 50 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth |
| 51 | S&F in repairs 20mm dia bore pipe Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms)Complete all as specified |
| 52 | S&F in repairs 25mm dia bore pipe Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as required complete all as specified. |
| 53 | S&F tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed Make : Jaquar Cat part No AQN-7711 |
| 54 | S&F CP corner glass shelf with bracket complete all as specified. Make : Jaguar Cat Part No - CAN-1173 or equivalent |
| 55 | S&F chromium plated soap dish of size 120x80mm, fixed to plugs with chromium plated brass screws complete all as specified |
| 56 | S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections complete all as specified |
| 57 | M & L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 58 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed |
| 59 | S&F in repair vitreous china wash down water closed pan (Pedestal pattern) white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic (excluding flushing cistern and flush pipe) complete all as specified |
| 60 | S&F in repair 15mm dia cast copper alloy chromium plated long body bib tap fancy type with wall flange complete all as specified |
| 61 | M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in mass concrete, sunken floor complete all as specified and directed |
| 62 | S&F for curtain rods 25mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified |
| 63 | Dismantling wood boarding, panels, beams or any description, fixed any position with nails |
| 64 | M&L for 18mm thick HDF boarding (Fire and water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site complete all as specified and as directed by Engr-in-Charge. Make : bajaj/ Axis/Greenply/ Amnchidply or equivalent. Note : (i) Cutting edges of cupboard shutter/ shelves to be finished with adhesive edge binding tape all as directed |
| 65 | S&F stainless steel auto closing hinges 35mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified. Make : Hettich/Harrison/Dorsel |
| 66 | S&F stainless steel non megnetic bow handle \\"D\\" type anodized 150mm long complete all as specified. Make : Hettich/Harrison/Dorsel |
| 67 | S&F door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified |
| 68 | S & F in repairs for wall mixer 3-in-1 system with provision for both hand shower and over head shower composite with 115 mm long bend pipe connecting legs & wall flanges Mixer (Make: Prayag Cat No PIS-80H or Equivalent approved), hand shower including 1.5 mtr flexible tube with hook Cat No BHS-99 of Prayag or Equivalent, and over head showerwith arm and flange (300mm) of cat No BS-69 of Prayag or Equivalent in Jaquar. |
| 69 | Overhead Shower 120mm dia Round Shape Single Flow (Face Plate Stainless Steel & ABS Body in Chrome finish) with Rubit Cleaning System (Jaquar Code : OHS-CHR-1663) |
| 70 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 8mm dia pipe with 1 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed Jaquar Code : ALD-CHR-5771 |
| 71 | S&F in repair 15mm dia cast copper alloy, chromium plated pillar tap long body swan neck type with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified |
| 72 | S&F in repair angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions complete all as specified and as directedMake : Jaquar Cat Part No CON-053KN |
| 73 | S&F for Two way Bib Cock Jaquar Code : ACN-CHR-1193N1 |
| 74 | S&F in repair 600x450x6mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified |
| 75 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed |
| 76 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 77 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 78 | S&F PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed |
| 79 | S&F PVC (SWR) 110mm dia junction single (single T) equal or unequal reducer 'T' 110mm to 75mm dia and jointed with approved adhesive complete all as specified and directed |
| 80 | S&F PVC (SWR) vent cowl 110mm dia jointed with approved adhesive complete all as specified and directed |
| 81 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed |
| 82 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 83 | S&F PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 84 | S&F 75mm outlet dia PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe complete all as directed |
| 85 | S&F flush pipe of polyethylene of low or high density or PVC 32 mm dia flexible pipe suitable for WHB/sink/urinal etc complete all as specified |
| 86 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified |
| 87 | S & F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 88 | S&F for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified |
| 89 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed |
| 90 | S & F brass body 4 levers vertical/ round type mortice night latch of size 100mm complete all as directed |
| 91 | S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6mm dia, GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long etc., complete all as specified and directed. |
| 92 | M&L for 4mm thick non asbestos fiber cement building design board of size 605x605mm fixed or laid to aluminum grid work with screws and including preparation of surface with two coats of oil bound distemper over a coat of chalk whiting primer etc., complete all as specified and directed. |
| 93 | M&L for plastering the external wall/ ceiling surfaces 20mm thick (1:3) using Nito Bond SBR of Fosroc @ 7 Ltr per bag of cement or equivalent make of Dr.Fixit of Pidilite Industries or @ 5% by weight of cement of Harjas Coatings and Polymers.Make : Nito Bond SBR and Nito Bond AR of FOSROC or equivalent make of Dr.Fixit of Pidilite Industries or of Harjas Coatings and Polymers. |
| 94 | Dismantling timber scantlings 40 sq. cm and over in section, in fillets, rails, posts, rafters, purlins, etc. in any position complete all as specified and directed |
| 95 | Cutting out existing cracks in concrete surfaces/masonry wall/slab forming grooves of 25mmx40mm size, cleaning the groove thoroughly with blower, applying primer coat of the mix of IPH CC or Hydroseal siliconate epoxy resin and hardner in equal proportion with spray gun suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC in equal proportion of make Harjas coating and polymers or hydroseal siliconate epoxy resin hardner and admixture in the proportion of 1:1:2 and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following minimum coverage per running meter of groove :-Material : Priming coat putty filling seal coat, Resin 60gms 100gms 40gms, Hardner 60gms 100gms 40gms, Admixture 400gms |
| 96 | Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed. |
| 97 | Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed. |
| 98 | Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed. |
| 99 | M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Make of wire : V-Marc/Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 100 | Description same as per item Sl No.99 above but for One light/fan point controlled by one modular switch 6 Amps one way complete all as specified and directed. |
| 101 | Description same as per item Sl No.99 above but for one modular 3 pin 6 Amp socket out let on independent board complete all as specified and directed. |
| 102 | Description same as per item Sl No.99 above but for one modular 3 pin 6 Amps socket outlet on same Board complete all as specified and directed. |
| 103 | Description same as per item Sl No.99 above but for one bell point controlled by one modular bell push switch 5 Amps one way complete all as specified and directed. |
| 104 | Description same as per item Srl No.99 above but point wiring with 4.0 sqmm PVC FRLSH insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board complete all as specified and directed. |
| 105 | S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 106 | S & F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 107 | S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed.Make : Roma (Anchor)/ Legrand/ Havells |
| 108 | S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16 Amp , universal complete all as specified and directed. Roma (Anchor)/ Legrand/ Havells |
| 109 | S & F modular bell push 5 Amps 1 modular 230v, 50Hz AC complete all as specified and directed. Make : Roma (Anchor)/ Legrand/ Havells |
| 110 | S & F stepped type modular fan regulator, 2 modular type complete all as specified and directed. Make-Roma (Anchor) / Havells (Crabtree) / Legrand |
| 111 | M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 5A, 240 volts complete all as specified and as directed. |
| 112 | S&F electric bell, ding dong type, AC, 230 volts complete all as specified and as directed. Make: Anchor/ Cona/ Legrand |
| 113 | Taking down carefully ceiling fan of any make, size from its location, dismantling complete, examine complete parts thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of small parts such as split pin, nut bolt, screws and assembling back the fan, make fully functional, re-fixing the fan to its position including replacing and providing of twin core copper wire 23/0.0076 from fan to ceiling rose and painting the fan with same colour of fan complete all as directed. |
| 114 | S & F air ventilating fan 200 mm sweep single ph, 230 volt, PVC body with louvers incl all fixing arrangement complete all as specified and directed. Make: CG, Model No: BRISK AIR NEO or equivalent to Havells/ Orient / Usha/ Khaitan |
| 115 | Taking down carefully existing electronic energy meter of any capacity and any size and refixing the same location after completion of B/R work . |
| 116 | Supply & fix of FRP meter box of size (inside) 250 x 250 x 160 mm including taking down the old/unserviceable meter boxes all as specified and directed. Make : SINTEX Cat No. GSMB-2525 or equivalent to Hensel |
| 117 | Taking down carefully electric geysers of any make, type and capacity after disconnecting of electrical and water connections, opening of bottom cover, checking of all parts and taking out copper tank, checking of its leakage and removing the dust, brazing the leakage and painting of geysers with two coats of synthetic enamel paint, replacement of wornt out spares and reassembling the geyser and re-fixing back in its original position complete all as specified and as directed.NOTE: Spares shall be measured and paid separately under relevant items as SUPPLY ONLY. |
| 118 | Supply only heating element 1500 watts. |
| 119 | Supply only thermostat switch. |
| 120 | Supply only pressure release valve. |
| 121 | Supply only thermal cut out. |
| 122 | Supply only indicator lamp RED/GREEN colour. |
| 123 | Supply only PVC connection 15mm size with PTMT nuts of length 600mm. Make:- Prayag/ Polytuff |
| 124 | Supply & fix Modular Ac Box With 20A DP MCB \\"C' Type, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top, 240 volts AC supply for air conditioner, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) model no 98492 or equivalent |
| 125 | Supplying, fixing and testing Tube light fittings aluminium housing, Diffuser slim Integrated design LED 21 watts 4 feet, IP-20 including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Philips Cat Part No : BN021C LED22S or equivalent to CG/ Havells/ Luker |
| 126 | S & F Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base all as specified and directed by Engr In charge.. Make-Havells model No LHFOAJE1TZ1I060 |
| 127 | Supply and fixing and testing Mirrior light fitting of cap 20 watt with all fixing arrangements all as specified and directed. Make-Havells cat no LHLDESAARANC020 or equivalent to Philips/ CG |
| 128 | Supplying & fixing LED bed side lamp of capacity 3 watts with LED bulb (white/yellow colour of light as required at site) complete all as specified and directed. Make : Philips Model Moden No : 48042 or euivalent to Havells/ CG |
| 129 | S & F 25 watts LED building security light fittings ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP66 protection. Efficacy ≥ 110LPW including necessary fixing arrangements as per site requirements all as specified and directed by Engr In charge. Make : CG Cart Part No: LSTS-25-CDL-M or equivalent to Philips /Havells |
| 130 | Taking down old corroded GI bracket of 32 mm dia and supply and fixing new GI brackets of GI pipe light grade of size 32 mm dia including nuts, bolts and washers for building secufity light all as specified and directed |
| 131 | M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 sq mm single core FRLSH 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow /Blue, Neutral- black and earth- green in and incl rigid PVC concealed/surface conduit (ISI marked) incl all specials/ accessories etc and provision of PVC insulated FRLSH copper conductor single core cable of same size but green in colour as continuous earthing wire all as directed. |
| 132 | Description same as per item Sl No 126 above but sub main wiring with 2 single core 4.0 sq mm duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire. |
| 133 | Description same as per item Sl No.126 above but sub main wiring with 2 single core 1.5 sq mm duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire.Note for item No 126.00 to 128.00 : 3 length of cable and one length PVC Conduit shall be measured and paid for one length. |
| 134 | S & F Triple pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TPN DB system 04 ways, and making good to the distrubed surface /walls complete all as specified and directed. |
| 135 | S & F in replacement of MCB DB, SPN, 8-way, double door, 240 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. |
| 136 | S & F MCB TPN 40-63 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. |
| 137 | S & F of MCB, SPN, \\"C\\" series, 230 volts, 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. |
| 138 | S & F MCB SP 06-32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.Note for item No 136 to 138.0 :- Termination of all wiring in to MCBs/ MCCBs/ DBs shall be through copper lugs/thimbles of adequate size. |
| 139 | M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed.NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type RCC chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender