Tender For Providing Service Connection Of Outdoor Feedar Pillars From Dg Room To Stage Of Football Ground And Around The Football Ground At Ftr Hq Bsf Tripura.
Tender Value
2.99 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
5 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Service Connection Of Outdoor Feedar Pillars From Dg Room To Stage Of Football Ground And Around The Football Ground At Ftr Hq Bsf Tripura.
BOQ
| Sl. No. | Item Description |
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | SProviding and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required a) 100 A,30KA,FPMCCB |
| 3 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering a) Upto 35 sq. mm |
| 5 | b) Above 35 sq. mm and upto 95 sq. mm |
| 6 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required a) 3.5 X 35 sq. mm (32mm) |
| 7 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as requiredb) 3.5 X 50 sq. mm (35mm) |
| 8 | Supplying and laying of following size DWC HDPEpipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part IIcomplete with fitting and cutting, jointing etc.direct inground (75 cm below ground level) includingexcavation and refilling the trench but excluding sandcushioning and protective covering etc., complete asrequired A)63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 9 | SITC of various sizes water protected outdoor hut type joint box both side opening having depth up to 400 mm suitable for 415 Volt, 3 phases, 50 Hz made out of 16 SWG thick CRCA sheet with required hardware duly painted with powder coated . Panel having end termination as per cable of size,angle iron base frame made out of 50mmx50mmx6 mm angle iron of suitable size of the feeder pillar (minimum height 100 cm), led pilot light for phase indicator (R,Y,B) on top, 100A/415V 4 strip aluminum bus bar duly PVC sleeved. Panel grouting the legs in existing floor with 1:3:6 cement concrete foundation etc complete as required (Panel should be as per design & drawing approved by Engg in charge). |
| 10 | S/ITC of outdoor type feeder piller,double door made out of 16 SWG sheet duly primed & painted with synthetic enamel black paint 600 mm deep having 400 amps, 04 nos insulated aluminium bus bars and to accommodate following accessories, front & back openable door, P & F of internal connection with suitable size of copper wires, following accessories & angle iron frame of 1000 mm long legs made out of 40 mm x 40 mm x 5 mm thick angle & grouting the same in suitable cement concrete foundation, arrangement for incoming & outgoing cables, cable termination, earthing, locking, interconnection etc. as required. |
| 11 | Making of the hole inside the road (Bitumin / PCC ) for laying of Under ground cable in Suitable HDPE/GI pipe without damaging of road. |
| 12 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 3.5 x 35 sq mm direct in the existing RCC/ HUME/ METAL/ pipe/ Open in air/sadling as required. Make Havells/KEI/Polycab etc. |
| 13 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size 3.5 x 50 sq mm direct in the existing RCC/ HUME/ METAL/ pipe/ Open in air/sadling as required. Make Havells/KEI/Polycab etc. |
| 14 | Providing and fixing MCCB, 63 Amps, 4 pole , breaking capacity 20 KA, 415 V, 50 Hz with suitable thermal operating mechanism including spreader terminal in existing cubicle panel board, making connections, As required including dismentling the existing make Havells /Standard/legrand/L&T/Indoasian Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender