Tender For Provision Of Flood Light Arrangement In New Football Field And Kho Kho Ground Inside Niser C Us, Jatani.
Tender Value
14.76 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
5 days left
EMD
29532
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Flood Light Arrangement In New Football Field And Kho Kho Ground Inside Niser C Us, Jatani.
BOQ
| Sl. No. | Item Description |
| 1 | 10 Meter GI Pole:Supply, installation, testing & commissioning of Round top 10 m octagonal galvanisedtaperedpole(abovegroundlevel),fabricated out of 3mm thick sheet complete with in built junction box,baseplate size 300x300x20mm,two arm of ERW galvanised pipe of 60mm dia and 1min length on two side of pole shaft as per detailed specifications. Pole should be made of BSEN 10025 grade mild steel, polygonal and continously tapered in three sections, hot dipped galvanised (as per BSENISO1461and suitable for wind velocityof 200Km/Hr design life 25 years, terrain category -2. Juncion box should be provided 500 mm above base plate with 4 Nos terminals on epoxy insulators, 2 No.6A SP MCB &1 no.neutral link.Base plate should have 4 Nos holes on each side suitable for mounting on RCC foundation 250 mm above FGL. General specifation and drawing should be approved from EIC before manufacturing) |
| 2 | RCC Work for foundation Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mmnominal size) |
| 3 | Centering and shuttering for foundation Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns |
| 4 | PCC Work for foundation Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Steel reinforcement Work for foundation Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Hot rolled deformed bars |
| 6 | GI Wire Earthing for foundation Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 7 | Cable Laying and cable route marker with foundation Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering with brick on 3 side and refilling the trench etc as required along with cable route marker of 1 feet height above ground with PCC foundation. |
| 8 | SITC of 350W LED FLOOD LIGHT Supply, installation, testing & commissioning of 350W led Flood light Fixture as per specification mentioned in Annexure-5 of NIT |
| 9 | WIRING FOR FIXTURE Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable insurface/recessedsteelconduitasrequired.(2X1.5sq.mm+1 X1.5sq. mmearth wire) |
| 10 | Cable end Termination Supplyingandmakingendterminationwithbrasscompressionglandand aluminium lugs for following size of PVC insulated and PVC sheathed / XLPEaluminiumconductorcableof1.1KVgradeasrequired.4CX16sq. mm Cable |
| 11 | Supply and fixing of below materials for the existing outdoor stand mounted feeder pillar. Each feeder pillar requires below mentioned material1. ON,OFFpushbutton-2Sets2. 32A MCB -4 Nos3. ON,OFF Indication-2Sets4. 32Acontactor -2Nos5. 63Acontactor-1no6. Electronic digital type timer-2 Nos7. Volt meter and ammeter-1No each |
| 12 | Supply and installation of 100W LED flood light fixture Supply and Fixing of LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt).Supplying, Installation, Testing & Commissioningof Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%,Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% Fixture as per specification mentioned in Annexure of NIT |
| 13 | Erection of Pole Erection of metallic pole of (Above 8.0 Meter and upto 10.0 Meter )in existing foundationincluding excavation and refilling etc. as required. |
| 14 | Supply of 4Cx16 Sqmm FRLS XLPE Armoured Alluminium Cable, 650/1100 V. grade confirming to IS : 7098 (Part-1) 1988. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender