Tender For Annual Repair To Dhank Caves, Junagadh For The Year 2026-27
Tender Value
8.80 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
8 days left
EMD
22015
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Junagadh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Repair To Dhank Caves, Junagadh For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing steel tube scaffolding / bamboo staging for wall elevation work up to 3.0 m height including strutting, propping, safety netting and maintaining in position for execution of works. |
| 2 | Raking out joints in lime or cement mortar from top bed and side surfaces to a depth of 10 mm to 20 mm, cleaning surface with wire brushes for proper bond. |
| 3 | Dismantling loose, unserviceable or damaged stone rubble masonry on top wall bed in cement mortar including stacking serviceable stone and disposal of unserviceable material within 50m lead. |
| 4 | Random rubble masonry with hard stone in superstructure above plinth level and up to floor V level, including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded aggregate 20mm) at window sills, ceiling level and the like in Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 5 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) in top coping layer over stone masonry wall to prevent water ingress. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of formwork for edges of copings, bands, window sills and string courses (up to 20 cm height). |
| 7 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand): Flush / Ruled pointing on new stone masonry faces and end profiles complete. |
| 8 | Earthwork in excavation in foundation trenches for isolated column footings (8 Nos. 1.0m x 1.0m x 1.2m depth) i/c dressing of sides. |
| 9 | Cement concrete 1:4:8 in levelling pad under isolated column footings (8 Nos. 1.0m x 1.0m x 0.10m thick). |
| 10 | RCC M20 grade in footings (4 Nos. 0.8m x 0.8m x 0.6m) and pedestals (8 Nos. 0.3m x 0.3m x 0.5m). |
| 11 | TMT Fe-500D steel rebar for footing beds and pedestals (@ 80 kg/Cum). |
| 12 | Structural steel work in columns (SHS 150x150x6), stringers (ISMC 200), landing beams (ISMC 150) & runner angles. |
| 13 | 6 mm thick MS Chequered Steel Plate in treads (30 Nos @ 1.5m x 0.28m) & landings (2 Nos @ 1.5m x 1.5m) = 17.10 m². |
| 14 | MS Pipe Handrail on both sides using 50mm NB MS pipe top rail & 40x40x5mm balusters (25.56 m total length). |
| 15 | High tensile foundation anchor bolts (M20 x 300 mm) in pedestals (16 Nos @ 2.812 kg/bolt). |
| 16 | Red oxide zinc chromate priming coat on framing, chequered plates and handrails (97.20 Sqm surface area). |
| 17 | Finishing with two coats of premium synthetic enamel paint over priming coat. |
| 18 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm around wall periphery (1.5m strip on both sides = 195 Sqm) using manual tools WITHOUT chemical weedicides to protect heritage base. |
| 19 | Pointing on brick work with cement mortar 1:3 (1 cement : 3 fine sand): Flush / Ruled / Struck or Weathered pointing complete. |
| 20 | Derusting and Painting of the Nuts |
| 21 | Mud Wash |
| 22 | Providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation blocks for M.S. angle 'Y' posts and struts (22 Blocks @ 0.30m x 0.30m x 0.45m = 0.89 Cum). |
| 23 | Supplying at site M.S. Angle iron post & strut of required size (ISA 50x50x6 mm), including bottom split and bent at right angles, drilling holes up to 10 mm dia for stay wires (20 'Y' Posts + 2 Struts = 267.53 kg). |
| 24 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia (10 m openable length), having 50 rounds per 6 m length, with existing/placed angle iron 'Y' posts placed 3.0 m apart and 9 horizontal R.B.T. stay wires, stud tied with G.I. staples and G.I. clips, complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender