Tender For Supply ,Delivery ,Installation, Testing And Commissioning Of Electric Furnace Unit-Ii At Natun Mahal Burning Ground Within Bishnupur Municipality.
Tender Value
82.65 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
1 days left
EMD
1.65 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bankura → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply ,Delivery ,Installation, Testing And Commissioning Of Electric Furnace Unit-Ii At Natun Mahal Burning Ground Within Bishnupur Municipality.
BOQ
| Sl. No. | Item Description |
| 1 | Pollution Control Unit Supply, delivery at site. Installation, testing and commissioning of S.S. Fabricated Ventury Scrubber & Packed wet scrubber with pressure release valve accessories complete and piping as required including foundation as per technical specification. |
| 2 | Supply, delivery at site, installation,Testing and commissioning of S.S. fabricated dropler separator/Mist eliminator with accessories Complete as per technical specification. |
| 3 | Supply and delivery at site, installation, testing and commissioning of Induced draught Fan with suitable rain protecting hood complete including foundations. |
| 4 | Supply, erection of S.S. duct line (300mm) complete with bend, and making wall support for the same along with Auto/ Manual Damper control arrangement and connection with ceramic brick line. |
| 5 | Supply, delivery at site, installation, testing and commissioning of Recirculation water pump along with necessary pipe line and accessories. |
| 6 | Design & Construction of underground storage reservoir and recirculation multistage slurry water tank with necessary soak pit of adequate capacity and protected M.S. structure consisting of M.S. angle/ flat, wire mesh netting and other necessary materials as required for slurry tank cover. |
| 7 | Supply & Delivery at site , installation, testing and commissioning of Electrical Control Panel for Pollution control Unit. |
| 8 | Furnace Unit Supply, erection, testing and commissioning of main control panel for furnace including group controlling arrangement. |
| 9 | Supply, erection testing and commissioning of Body Charging Trolley along with guide rail for coffin charging trolley carriage as required. |
| 10 | Supply, erection testing and commissioning of Mechanism for door lifting arrangement with Door ( hand Operated).with S.S. rod, Grade -310, Ceramic fiber Blanket, 128 density 1400 degree C temperature carrying capacity including S&F of chain(3/4\\" 2.4 M) for counter weight and door lifting arrangement and S&F of bearing for handle complete. |
| 11 | Supply, fitting, fixing of heating elements (coils), brush connector (Coil connecting elements), Thermocouple and Compensating cables including connection between thermocouple and temperature controller card incl. testing. |
| 12 | Development of R.C.C. Structure for the furnace bed incl. supplying of all raw materials as per requirement for proper alignment of furnace. |
| 13 | Supply and delivery at site, installation, testing and commissioning of Fresh air injection system including Forced draft Fan, Mild steel ducting, valve etc. complete as per drawing and specification. |
| 14 | Supply, erection testing and commissioning of Mild Steel structural work for Furnace chamber including ash door completeas per drawing and specification. |
| 15 | Supply, erection testing and commissioning of a furnace by using all shorts of Insulation materials, refractories like Fired bricks, Roast bricks & other necessary items etc. complete suitable for furnace ready. |
| 16 | General & Spares Painting of the whole installation complete as per directioin of EIC |
| 17 | Supply, delivery at site, installation, testing and commissioning of 1 H.P. pump motor set and making connection with supply and delivery line. |
| 18 | Commissioning and trial run of the whole cremation furnace including all other units of pollution control unit as per direction of EIC. |
| 19 | Making necessary arrangement for emition testing by authorized agency of WBPCB and assist ULB to obtain NOC from WBPCB. |
| 20 | Operation and maintenance of all the equipments described above incl. other accessories except the responsibility of security guard and maintenance of register. (For 1 Unit) |
| 21 | Supply, Installation and Commissioning of LED signage of ACP Panel board of size 10' x 5' with all necessary connections and earthing attchment as per direction of EIC. |
| 22 | Spares i) heating elements (4.5 Kw Each) |
| 23 | ii) Roast Bricks. |
| 24 | iii) Brick No 27 (1 Set : 20 Nos) |
| 25 | iv) Brick No 29 (1 Set : 20 Nos) |
| 26 | v) Thermocouple as per specification. |
| 27 | Main L.T. Panel, Cables, Distribution wiring and other accessories :- Supply, delivery at site and laying of 1.1 KV grade XLPE insulated PVC outer sheathed armoured copper/ aliminium conductor power cable of following size either through cable duct or through cable trays or through protection pipes and as required and as per technical specification :- 3 ½ core X 35 sq. mm. (Al.) |
| 28 | 4 core X 16 sq. mm. (Al.) |
| 29 | 4 core X 10 sq. mm. (Al.) |
| 30 | 2 core X 6 sq. mm. (Al.) |
| 31 | 7 core X 2.5 sq. mm. (Cu.) Control Cable |
| 32 | Single core solid conductor 10 sq. mm.(Cu.) power cable for heater connection. |
| 33 | Compression Glands - Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below - 3½ core, upto 95 sq. mm. (Al) |
| 34 | 3½ core, upto 35 sq. mm. (Al) |
| 35 | 4 core, upto 16 sq. mm. (Al) |
| 36 | 4 core, upto 10 sq. mm. (Al) |
| 37 | 2 core, upto 6 sq. mm. (Al) |
| 38 | Finishing cable ends:- Finishing the end of following XLPE/PVC armoured cables by crimping method incl supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:3½ core, upto 95 sq. mm. (Al.) |
| 39 | 3½ core, upto 35 sq. mm. (Al.) |
| 40 | 4 core, upto 16 sq. mm. (Al) |
| 41 | 4 core, upto 10 sq. mm. (Al) |
| 42 | 2 core, upto 6 sq. mm. (Al) |
| 43 | Supply, installation, testing and commissioning of floor Mounting cubical pattern, dust & vermin proof, generally conforming to IP-54 degree of protection indoor duty, industrial type AC PDB made of 2mm thick CRCA sheet steel, painted with powder coating finish paint with 1 no. 400 A,50KA, 4 Pole MCCB (Thermal Type) with O/L, E/F, S/C release, with indication and metering as incomer and 1 no. 250A TPN MCCB (35KA),with O/L, E/F, S/C release, with indication and metering, 2 no. 160 A TPN MCCB (35KA) with O/L, E/F, S/C release with indication and metering, 3 nos 63 A TPN MCCB,4 nos 32 A TPN MCCB, 1 no 16A TPN MCCB with indication as out going and 30 KVAR APFC panel as per technical specification. Approx dimension (W-2800 X H - 2375 X D -500 mm).Busbar suitable for 450Amps. |
| 44 | Supply, Delivery and fixing at site TMS 122M 2XTL5-28W EBE T/L fitting with lamp or Equivalent. fittings & fixtures as per specification. |
| 45 | Distribution wiring in 2 x 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. a) Average run 8 mtrs. |
| 46 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish. On Board |
| 47 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sq mm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish. Avg. Run 4.5 Mtrs. |
| 48 | Supply and fixing 415 V, 6 - 32 A per way, TPN MCBDB with SS enclosure double door with IP-42/43 protection with four Pole isolators as incomer and SPMCBs ('C Curve,10 kA) as out going, concealed in wall after cutting the wall and mending good the damages to original finish incl inter connection with suitable size of copper wire and neutral link & provision earthing attachment. (Legrand / Seimens) 4 Way Enclosure (607715), 63A FP Isolator, 12 no. SPM. |
| 49 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 36/0.3 (2.5 sq mm) + 1 x 22/0.3 (1.5 sq mm) ECC |
| 50 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 56/0.3 (4 sq mm) + 1 x 36/0.3 (2.5 sq mm) ECC |
| 51 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as require. |
| 52 | S & F 250 V A.C. 1400 mm sweep ceiling fan complete with blades, regulator, canopy, fork, rubber bush etc. incl. S & F 2 X 1.40 PVC wire for down rod upto 30 cm. incl. painting the rod with approved paint and making necessary connection as required. |
| 53 | S & F 450MM heavy duty Exhaust fan (1- phase) complete with all other accessories incl. making hole in the wall and connection. |
| 54 | Supply, fitting, fixing only street light 72W LED luminaries with all accessories to be fixed/projected from the wall of the building incl. making holes/ providing clamps arrangements and necessary reducer as reqd. S & F 40 mm dia G.I. Pipe class- B, medium, 1.5 mtr average length having suitable bend, S & F necy. length of PVC wire making connection as required and making good damages to wall incl. painting etc.. [Model:- BRV72W (Philips or equivalent)] |
| 55 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia. x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below :- By ISI-Medium GI pipe |
| 56 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. |
| 57 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. No. 8 SWG Solid G . I Wire |
| 58 | Supply, fitting, fixing GI pipes TATA make with all necy. Accessories, specials viz. socket, bend, tee, union, cross elbow, short piece etc. fitted with bats clamps, incl. cutting pipes, making threads, fitting, fixing complete in all respect incl. cost of all reqd. jointing materials two coats of painting with approved paint in any position above ground. 32 mm Medium quality. |
| 59 | Supply, fitting, fixing GI pipes TATA make with all necy. Accessories, specials viz. socket, bend, tee, union, cross elbow, short piece etc. fitted with bats clamps, incl. cutting pipes, making threads, fitting, fixing complete in all respect incl. cost of all reqd. jointing materials two coats of painting with approved paint in any position above ground. 40 mm Medium quality. |
| 60 | Supply, fitting, fixing wheel valves gun metal of approved brand and make tested to 21 kg/ sq. cm. for water lines only. 32 mm. |
| 61 | Supply, fitting, fixing wheel valves gun metal of approved brand and make tested to 21 kg/ sq. cm. for water lines only. 40 mm. |
| 62 | Portable Fire Extinguisher :- Supply, delivery, fitting, fixing of 6 Kg. Capacity (ABC type) fire extinguisher complete in all respect i.e. with first change of refill, mounting bracket etc. |
| 63 | S & F on wall or on stand of 9 lt. capacity24SWG M.S. bucket, IS:2546 50 % of the bucket capacity to be filled with sand. |
| 64 | ADD 18% GST |
| 65 | ADD 1% LABOUR WELFARE CESS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender