Tender For Provision Of Labour And Maintenance Of Mpl Buildings & Park Lights Installed In Various Sites Of Ward No-68 Under K Zone.
Tender Value
4.95 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
5 days left
EMD
9950
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Labour And Maintenance Of Mpl Buildings & Park Lights Installed In Various Sites Of Ward No-68 Under K Zone.
BOQ
| Sl. No. | Item Description |
| 1 | S/o 2.5 sq mm ISI marked, FRLS PVC insulated, single core copper conductor cable. |
| 2 | s/o 100 amps , 4 pole isolator etc as reqd |
| 3 | s/o 63 amps , rating, 4 pole RCCB , 30 mA etc as reqd |
| 4 | s/o 63 amps , rating, 2 pole RCCB , 30 mA etc as reqd |
| 5 | s/o MCCB 3 pole 100 amp 16 KA breaking capacity etc as reqd |
| 6 | S/o 2+2 Way, SPN Single door MCB DB comlete as reqd. |
| 7 | S/o Sheet Steel DP enclosure comlete as reqd. |
| 8 | S/o Sheet Steel TP enclosure comlete as reqd. |
| 9 | Supply of PVC insulated andFR PVC sheathed multicore copper cond.r 1.1 KV grade, conforming to grade IS 694 as required. 3X 1.5 sq mm |
| 10 | Supply of 14/15 watt LED retrofit lamp suitable for B22 holder etc as reqd |
| 11 | Supply and fixing of 32mm dia X 1 meter long G.I. Pipe (Medium Class) bracket for mounting of fluorescent/HPMV /HPSV Street Light fitting on pole including bending the pipe to the required shape , 2 nos 25mm X 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd. |
| 12 | Supply of XLPE insulated PVC sheathed AL. conductor unarmoured Cable 1.1 KV grade conforming to IS-7098 of following size- (a) 2X6 Sq mm |
| 13 | LED Street light fixture,powder coated pressure die cast aluminum body (System lumen efficacy >135 lm/Watt) Supplying of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >80, under voltage and over voltage protection, EMI- EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 45 watt |
| 14 | Supplying, of Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement ( <700ma) Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P.F.≥0.95, IP-66,IK-10, CRI >80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg 120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C). 100 watt |
| 15 | Providing following Labour for day to day maintenance of Electrical Installation in various Municipal Buildings, tubewell and parks i/c required T&P etc. in one shift on daily basis on all working days (required maintenance material will be provided by Department) as required as per terms & condition of the department (excluding parts) complete as required. (a) One Wireman- Skilled. (One shift daily for Seven months.) |
| 16 | (a) One Beldar- Unskilled. (One shift daily for Seven months.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender