Tender For Mtps-I - Mill Plant - A.C Plant - Unit-Iv - Aoh 2026-27 - Air Washer System Epoxy Painting Of Blowers, Spary Room And Its Auxiliaries, Replacing The Damaged 200 Nb Gi Header Pipe , Spray Nozzles Flushing And Works , Renewal Of Bellow In Di
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
4 days left
EMD
4700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Mtps-I - Mill Plant - A.C Plant - Unit-Iv - Aoh 2026-27 - Air Washer System Epoxy Painting Of Blowers, Spary Room And Its Auxiliaries, Replacing The Damaged 200 Nb Gi Header Pipe , Spray Nozzles Flushing And Works , Renewal Of Bellow In Discharge Duct - Overhauling The Awcw Pumps And Gate Valves - Providing Handrails In Air Washer Circulating Water Pump Room.
BOQ
| Sl. No. | Item Description |
| 1 | Charges for dismantling the casing cover of blowers 4A & 4B for painting and reassembling after completion of painting works. |
| 2 | Charges for scratching and cleaning, painting with epoxy primer one coat and epoxy smoke grey paint two coat for structures, spray room tank pipes, eliminator frame, water strainer structure, AWS Blowers 4A & 4B, dampers and ducts. |
| 3 | Charges for dismantling the water spray nipples and nozzles from the pipe line and scratching & cleaning and then re-fixing in the pipe line. |
| 4 | Charges for flushing the spray system pipe line |
| 5 | Charges for Pump complete overhauling and changing the worn out spares parts if necessary. |
| 6 | Charges for Refitting the pump with both suction and discharge pipe flanges with new gasket, coupling the motor with pump, checking axial and radial misalignment between pump and motor and completing the alignment within the prescribed limits and commissioning satisfactory. |
| 7 | Charges for Dismantling the Valves from the pipe line and Overhauling and then refitting of 250 mm / 200 mm AWCW Pump suction and discharge side Gate valves and cleaning of seating surface and lapping of valve gate and seat for perfect matching |
| 8 | Charges of cutting & dismantling the damaged eroded 200NB(GI) spray system Horizontal header pipe in AWS Unit-IV, transporting, lead , lift and erection of new GI ERW Pipe 200NB with necessary fittings and devolution the scrap material to central stores . |
| 9 | Charges for welding the new 200NB(GI) spray system header pipe lines with the existing 200NB MS Pipe. {The above work is inline Labour charges for IBR welding for Replacing the defective drain line valves or equivalent in Cooling water lines and ACW lines by Non IBR welder.( ERW pipe, reducer& bends) Rate for Two number Non IBR cutting and welding. |
| 10 | Charges for drilling holes and welding the 40NB GI coupling in the new 200NB(GI) spray system horizontal header pipe lines |
| 11 | Erection of handrails in air washer circulating water pump room by using 40 NB MS pipes by marking, cutting the pipes to the required length, leading and lifting the pipes to the work spot and erection of the pipes |
| 12 | Charges for welding the MS Flat with I Beam and MS Flat with vertical support pipes and handrails in air washer circulating water pump room |
| 13 | Charges for fixing the canvas cloth bellow joint in the Air Washer fan discharge line inside the Air Washer room(Blower 4A ) |
| 14 | Cost of Zinc Phosphate /Aromatic Polyurethane Epoxy Primer |
| 15 | Cost of Epoxy paint smoke grey |
| 16 | Cost of Epoxy Thinner |
| 17 | Cost of GI bolt (8 mm X 25 mm length) with nuts and GI washer |
| 18 | GI Coupling 40 NB |
| 19 | 40mm dia. GI Pipes |
| 20 | MS Flat 80mm x 6mm thick |
| 21 | Cost of MS bolt (M 12 X 50 mm length) |
| 22 | Welding rod |
| 23 | Canvass cloth |
| 24 | Bearing 6308 |
| 25 | Bearing N 308 |
| 26 | Cutting gas |
| 27 | Cost of MS bolt (M 16 X 100 mm length) with nuts and washer Drive End/Heater Drip Pump/ Model: NU 411 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender