Tender For Nctps - I - Operation Circle - Ca Dn. - Routine Maintenance And Breakdown Works Of Ht And Lt Motors At Cwph, Dm Plant & Rwph And 25 Ton Eot Crane, 15 Ton Gantry Crane, 2 Ton Hoist At Cwph, 5 Ton Eot Crane At Rwph And 50/10 Ton Crane At Cen
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Nov 2026
11 days left
EMD
19500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nctps - I - Operation Circle - Ca Dn. - Routine Maintenance And Breakdown Works Of Ht And Lt Motors At Cwph, Dm Plant & Rwph And 25 Ton Eot Crane, 15 Ton Gantry Crane, 2 Ton Hoist At Cwph, 5 Ton Eot Crane At Rwph And 50/10 Ton Crane At Central Stores For 360 Days.
BOQ
| Sl. No. | Item Description |
| 1 | Charges for cleaning Disconnecting and Connecting of power cable at HT motorsCharges for cleaning the outer surface of 6.6 KV,1050 KW, 420 RPM, CWP HT motor, 9 Nos for all the three units at NCTPS-I. |
| 2 | Charges for cleaning Disconnecting and Connecting of power cable at HT motorsCharges for disconnecting and connecting the power cable, space heater cable, earth flat of CWP HT motor at CWPH. |
| 3 | Cleaning of LT motorsCharges for cleaning the outer surface of 415V, 30 KW, SBW motor- 4 nos, 11 KW Chlorination motor-2 nos, 7.5 KW LWBP motor - 4 nos, 3.7 KW LWP motor - 4 nos, 3.7 KW TWS motor - 9 nos, 2.2 KW REF motor - 6 nos at CWPH. (Weekly Once) |
| 4 | Cleaning of LT motorsCharges for cleaning the outer surface of 415V, 45KW, 2955 RPM, SWP motor - 3 nos, 22KW, 2940 RPM, RWP motor - 3 nos, 15 KW Ro reject motor - 2 nos, 2.2KW sump motor -1 no at RWPH. (Weekly Once) |
| 5 | Cleaning of LT motorsCharges for cleaning the outer surface of 415V, 110 KW, HPP motor - 3 nos, 18.5 KW RO cleaning - 2 nos, 15 KW Horizontal Effluent motor-2 nos, 15 KW DG water motor-4 nos, 9.3 KW permeat water motor-4 nos, 9.3 KW RO Flushing motor-2 nos, 7.5 KW AC makeup motor -2 nos, 7.5 KW DM blower motor -2 nos, 5.5 KW plant potable motor-2 nos, 5.5 KW DM water transfer motor-4 nos, 5.5 KW mixed bed blower motor-2 nos, 3.7 KW stator water makeup motor -2nos, 3.7 KW DM regeneration -2nos, 3.7 KW Acid unloading motor-2 nos, 3.7 KW Alkali unloading motor-2 nos, 2.2 KW RO blower motor -4 nos, 0.75 KW DM DG blower-6 nos, 0.75 KW Acid dozing -2 nos, 0.75 KW at Dm plant (Weekly once). |
| 6 | Overhauling of LT motorsCharges for complete overhauling of 2.2KW motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (DM degasser blower motor, Roof exhaust fan motor and RO blower motor). |
| 7 | Overhauling of LT motorsCharges for complete overhauling of 5.5 KW to 7.5 KW motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (DM water Transfer motor and Lub water motor). |
| 8 | Overhauling of LT motorsCharges for complete overhauling of 15 KW to 22KW motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling ( DG water motor and raw water motor) |
| 9 | Overhauling of LT motorsCharges for complete overhauling of 9.3 KW motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (Ro Flushing motor, Permeat water motor). |
| 10 | Overhauling of LT motorsCharges for complete overhauling of 3.7 KW motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling (Travelling water screen motor,Lub water motor). |
| 11 | Overhauling of LT motorsCharges for complete overhauling of 0.75 KW motor including dismantling, cleaning of the stator coils, checking the tightness of the stator wedges and applying one coat of insulating varnish, replacement of both DE and NDE bearings and assembling ( DM DG blower). |
| 12 | Overhauling of LT motorsCharges for metal filling, machining and repairing of worn out shafts / bearing seating surfaces of one side, checking of bearing housings, providing sleeves in the end cover of one side. |
| 13 | Charges for Replacement of failed LT motors ranges from 0.75KW to 5KWCharges for disconnecting the power cable, releasing the motor from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after overhauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor, reconnecting the powercable of motor (for 0.75KW to 5KW) |
| 14 | Charges for Replacement of failed LT motors ranges from 5KW to 15KWCharges for disconnecting the power cable, releasing the motor from its bed, lifting, lowering and transporting the motor to a convenient location, removing of coupling pulley, refixing of coupling pulley after over hauling, transporting the motor to its location, lifting, lowering the motor and placing in motor bed and erection of motor, reconnecting the power cable of motor (for 5KW to 15KW) |
| 15 | EOT 25 Ton crane and 50/10 Ton crane and 15 Ton Gandry craneRoutine Cleaning of 25Ton and 50/10 Ton EOT Crane and 15 Ton Gandry crane External cleaning of the following equipment by service Air in both cranes.1.Crane Base2.Cross Travel rail paths.3.Long travel rail paths & platform to a total distance of 370 meters at both end.4.Cleaning the cable ducts and cables. |
| 16 | EOT 25 Ton crane and 50/10 Ton crane and 15 Ton Gandry craneRoutine Maintenance of Change over Switches, Main Isolator Switches, complete cleaning the control panel contactors and relays and applying lubricants and tightness checking the cable terminals., checking the Resistance Boxes, and LT Motors in EOT crane. |
| 17 | EOT 25 Ton crane and 50/10 Ton crane Main bus bar cleaning and checking of hylam washer and changing if necessary and checking of welding joint and tightness checking of fixing bold of bus bar by moving the crane manually for above 20 mtr. by using the hand lever, Finally checking the alignment of bus bar |
| 18 | EOT 25 Ton crane and 50/10 Ton crane and 15 Ton Gandry craneCharges for rectification of MH/ AH EM brake/Creep brake assembly by checking the healthiness of brake assembly, brake coil winding, brake system wiring, renewal of defective brake coil and checking brakes operation in EOT Crane. |
| 19 | 3 Ton EOT and 2 Ton HoistRoutine Maintenance of Main Isolator Switches, complete cleaning the control panel contactors and relays and applying lubricants and tightness checking the cable terminals., checking the Resistance Boxes, and LT Motors in EOT crane. |
| 20 | 3 Ton EOT and 2 Ton HoistCharges for Cleaning of local push button station, tightness checking the push buttons and the terminal blocks and replacement of stop/start push buttons |
| 21 | 3 Ton EOT and 2 Ton HoistCharges for maintenance works in LT Motors in CWPH, DM Plant and RWPH - 98 Nos. Removal of terminal covers, disconnecting power cables, DE side grease applying NDE remove the fan cover and NDE fan side grease applied and checking the terminal tightness, measuring the IR values, connecting the power cables and closing the terminal covers |
| 22 | Rewinding of LT motorsCharges for rewinding of similar 2.2KW LT motors including replacement of new terminal block, new bearings, cooling fan and fan cover |
| 23 | Rewinding of LT motorsCharges for rewinding of 0.75KW LT motors including replacement of new terminal block, new bearing, cooling fan and fan cover |
| 24 | Rewinding of LT motorsCharges for routine maintenance works HT motors at CWPH locations and Quarterly maintenance breakdown maintenance such as tightness checking of HT Power cable, Motor Terminal And Earthing, Measuring DC resistance using megger, Measuring IR value and Greasing 6.6 kV,1050kW, 420rpm (vertical type) |
| 25 | Rewinding of LT motorsCharges for Dismantling the non-drive end cover, cleaning the cooler tubes internally with air and wire brush and reassembling of CWPH motors 6.6kV, 1050kW, 420rpm(vertical type)during Unit Annual Overhauling. |
| 26 | Cleaning of LT motors EOT 25 Ton crane and 50/10 Ton crane and 15 Ton Gandry craneCharges for Cleaning the outer surface of 415V, 45 kW, M.H motor-1 No, 5.5kW, C.H motor - 1 No, 3.7 kW LT motor - 1 No, 2.2KW CT motor - 1 No at EOT 25 Ton crane CWPH (monthly twice) |
| 27 | Cleaning of LT motors EOT 25 Ton crane and 50/10 Ton crane and 15 Ton Gandry craneCharges for Cleaning the outer surface of 415V, 22 kW, M.H motor-1 No, 3.7kW, C.H motor - 1 No, 2.2 kW LT motor - 2 Nos, 2.2KW CT motor - 1 No at 15 Ton Gandry crane CWPH (monthly twice) |
| 28 | Cleaning of LT motors EOT 25 Ton crane and 50/10 Ton crane and 15 Ton Gandry craneCharges for Cleaning the outer surface of 415V, 30 kW, 50 Ton M.H motor-1 No, 18.5kW, 10 Ton M.H motor-1 No, 4.9kW C.H motor - 1 No, 5.2 kW LT motor - 1 No, 3.7KW CT motor - 1 No at 50/10 Ton crane at Ware House(monthly twice) |
| 29 | Material charges for rewinding of similar 2.2KW LT motor including Bearings, Terminal block, cooling fan and fan cover(retrieved copper will be retained by the contractor) Less copper scrap value and Less scrap value for damaged bearings. |
| 30 | Material charges for rewinding of similar 0.75KW LT motor including Bearings, Terminal blocks, cooling fan and fan cover(retrieved copper will be retained by the contractor) Less copper scrap value and Less scrap value for damaged bearings. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender