Tender For Special Repairs To Damaged Wall Panelling, Screen, Dias, And Other Repair Works In 8Th Floor Conference Hall Of Singaravelar Maligai, Rajaji Salai, Chennai-01
Tender Value
17.78 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
11 days left
EMD
17786
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Damaged Wall Panelling, Screen, Dias, And Other Repair Works In 8Th Floor Conference Hall Of Singaravelar Maligai, Rajaji Salai, Chennai-01
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the damaged wall panel/ partition including removal of plywood/ hilux board, frames and others etc., complete complying with standard specification and as directed by the departmental officers. |
| 2 | Renewing the damaged Mica sheet on Table Top, Front side and Inner side sheet with best quality 1mm thick special design Laminated Sheet (wood grains) including removing the old damaged sheet, preparation of surface and Dias Corner and Front side should be fixed with teakwood ornamental beading of size 25x12 mm and fixing using headless nails, screws, fevicol/SR paste, etc., The rate inclusive cost of all materials, transportation, labour charges, hire charges for tools plants, etc., complete as directed by the departmental officers. |
| 3 | Renewing the damaged partition with new one of Fully Calcium silicate HILUX Board Partition using alu box section and aluminium frame at an interval of 0.60m at the aluminium frame of size [email protected]/m with necessary 'L' Angles, screws, nails and fixed in the wall using drilling machine with neat straight alignments etc., after finishing the frame work and fixed on one side 10mm thick HILUX BOARD approved quality and ISI make with necessary screws nails, fevicol and necessary grooves as per instruction of the departmental officers and finally cleaning the partition and neatly fixing in the position etc. The rate is inclusive of cost of materials, labour charges aluminium frame work and partition work, transporting charges etc., complete as directed by the departmental officers. |
| 4 | Renewing and relaying wooden flooring (universal make) at site 8mm thick using click laminated floor with inbuilt 3mm sound bloc. Class of use 31 water resistant A.C 3 grade impact resistant IC3 [as per EN 130 900 / 1400] having 0.60mm MLC (Multi layer Composite) high pressure laminated surface treated with alu, oxide surface guard + SRSG 2 (Scrach resistant surface second generation) on top of moisture high density fibre board substrate specially developed corp of plank size 1288mmx196mmx8mm have proloc joints tongue and groove to secure long loasting joint. The tongue and groove having the edges duty pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg/m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading unloading transportation etc., complete. |
| 5 | Renewing the damaged wall panelling with new one of Fluted design wall panelling using best superior quality WPC fluted design panel of 12mm thick approved quality and ISI make with necessary screws nails, fevicol and necessary grooves as per instruction of the departmental officers and also cutting the partition for Electrical Switch box and AC Plug Box and telephone Box requirements and finally cleaning the wall panelling with neat position etc. The rate is inclusive of cost of materials, labour charges for fixing, transporting charges etc., complete as directed by the departmental officers. (The materials quality and colours are approved by the departmental Engineer before use of works) |
| 6 | Renewing and fixing 8mm thick high density fibre board profile 50 mm width with a density of 850 kg / M3 having a click system tongue and groove joint to secure a long lasting joint. The rate is inclusive of cost of materials, labours involved conveyance charges etc complete complying with standard specification. |
| 7 | Renewing and fixing High density fibre board with laminated beading 25 x 12 mm on corners of dias, steps, handrail, etc., The colour and quality to be match with wooden flooring fixed using headless nails, screws, fevicol, etc., The rate inclusive labour charges, loading & unloading, transportation, etc., complete as directed by the departmental officers. |
| 8 | Renewing the damaged partition with both side fully Calcium silicate HILUX Board 10mm thick using alu box section and aluminium frame at an interval of 0.60m at the aluminium frame of size 50.80mmx25.40mmx1.50mm @ 0.593kg/m with necessary 'L' Angles, screws, nails and fixed in the wall using drilling machine with neat straight alignments etc., after finishing the frame work and fixed with both side 10mm thick HILUX BOARD approved quality and ISI make with necessary screws nails, fevicol and necessary grooves as per instruction of the departmental officers and also cutting the partition for Electrical Switch box and AC Plug Box and telephone Box requirements and finally cleaning the wall panelling with neat position etc. The panelling both sides should be finished with best wall putty and painting two coats of plastice emulsion paint over one coat of primer including preparation of surface etc. The rate is inclusive of cost of materials, labour charges aluminium frame work and partition work, transporting charges etc., complete as directed by the departmental officers. (The materials quality and colours are approved by the departmental Engineer before use of works) |
| 9 | Renewing and refixing of teakwood frames for doors, windows and ventilators and any other similar joinery works including cost of Teak wood scantlings and labour charges for manufacturing the frames and fixing hold fasts and fixing in position etc. for all lengths as per architect designs. |
| 10 | Renewing and refixing solid core flush shutter arrangement with following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) also provided with Best quality of Mica sheet 1mm Thick with more grains fixed using fevicol, headless nails, etc., The Plain Sheet Glass - 5.5mm thick with support at Ornamental Beading 15mm x 12mm all over plain Sheet glass. including cost of wind appliances and furniture fittings such as 6 Nos Brass Hinges of size (125mmx30mm),2 Nos. 200x12mm Brass tower bolts, 1No Brass 300mm aldrops, 2 Nos.150mm Brasss Oranamental handle,2 Nos 250mm Brasss Oranamental handle, Door closer and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Door Shutter Type : Double leaf. Thickness:30/35mm |
| 11 | Renewing and refixing mount track type fabric screen window top to floor level consisting of heavy duty extruded aluminum powder coated curtain track with suitable runners, gliders, end stoppers and ceiling brackets. The screen shall be made of premium quality polyster fabric of approved colour and pattern, stitched with double fold hems and suitable heading tape/hooks to obtain uniform pleats, fixed in position as directed by the departmental officer (the design and quality should be got approved by the departmental officers before use). |
| 12 | Renewing and refixing in position white glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Engineer before use on works) |
| 13 | Renewing and refixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 14 | Renewing and refixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., includ- ing dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) |
| 15 | Renewing and refixing of following special quality toilet fittings of approved make conforming to IS specification and quality make including cost and supplying etc., complete as directed by the departmental officers. |
| 16 | Angle cock tap |
| 17 | Two Way Bib Cock with Health Faucet |
| 18 | Renewing and refixing a polished brass Tamil Nadu state emblem of approved design and 15\\" size. The Logo has been chemically etched/CNC engraved, finished with mirror polishing, coloured enamel filling, concealed fixing arrangement with all necessary accessories, fixed in position as directed by the departmental officer (the design and quality should be got approved by the departmental officers before use). |
| 19 | Renewing and refixing of imported 3D english brass letters of size 10\\" superior quality and fabricated construction finish. The are made up of brass material and fixed to wall using hilti anchor bolt including grout with necessary nuts and screws, drilling holes in the walls and making dismantled portion to original condition wherever necessary etc., The rate includes cost of stainless steel, hire charges for machineries , labour charges for lifting,fixing in position, transportation charges and other necessary materials etc., complete complying with standard specification and as directed by the departmental officer (the design and quality should be got approved by the departmental officers before use). |
| 20 | Renewing the damaged wall panelling using with Acoustic Sound proof wool board of 12mm thick with necessary screws nails etc., The rate including cutting the sheets and box section in to be made in position for partition necessary cutting for switch box A/C box fittings and also labour charges for fixing, neat finishing and transportation etc complete complying with standard specification and as directed by the departmental officers. |
| 21 | Renewing the damaged door with alu, anodized natural colour matt finish partly glazed, partly P.L.B., door with outer frame using alu, box section and of size 63.50mmx38.10mmx1.28mm,1.41mm @ 0.818kg/m, shutter frame at bottom using alu, box section of size 95.25mmx44.45mmx1.70mm @ 1.301kg/m, at top using alu, box section of size 47.62mm x 44.45mmx1.74mm @ 0.881kg/m, at vertical [lock rail] using 47.62mm x44.45mm x 1.52mm @ 0.881kg/m at vertical plain using 47.62mmx44.45mmx1.74mm @ 0.881kg/m, and bottom panel with necessary accessories such as rubber beading, aluminium clips of size 19mmx17.30mmx0.90mm @ 0.124kg/m, 'L' angle, door stopper handle, mortice lock, 150mm tower bolt, 125mm hinges, screws, PVC woolen felt etc, complete the rate inclusive of labour and power consumption charges required for fabrication if necessary clipping, dismantling the masonry RCC beams columns, wherever necessary with power drill to the original conditions after fixing etc, complete the aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness for all sections all the materials should be got approved by the EE before fixing inposition etc, complete. |
| 22 | Renewing the Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter. |
| 23 | Solid panel PVC door with frame |
| 24 | Repainting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 25 | Repainting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 26 | Collecting the scattered debris from the campus and conveying away the same to outside by lorry to a lead of 6KM including loading charges and dumping in low places and levelling etc., complete. |
| 27 | GST at 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender