Tender For Lac-Ads-Mla Ads 2024- 2025-Improvements To Yafi Palli Road -General Civil Work
Tender Value
24.23 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
4 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alappuzha → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lac-Ads-Mla Ads 2024- 2025-Improvements To Yafi Palli Road -General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Improvements to Roadway |
| 2 | OD133469/2026-2027:Dismantling of flexible pavements and sectioning the dismantled material and re rolling |
| 3 | 4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method |
| 4 | 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 5 | 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. |
| 6 | OD170477/2026-2027:Providing, laying and rolling of close-graded premix surfacing (Mix seal surfacing) material of 40 mm thickness composed of 25 mm to 10 mm and 11.2 mm to 0.09 mm aggregates using viscosity grade bitumen (VG-30) to the required line, grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 KN capacity and finishing to required level ,by Manual means |
| 7 | 12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 8 | 12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20 (Without formwork) |
| 9 | culvert |
| 10 | 2.4.2.B:Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Prestressed / reinforced cement concrete grade M-20 & above - By Mechanical Means |
| 11 | OD133467/2026-2027:RING BUND Type-I-Putting up ring bund as per approved shape 2.5 m bottom width, 1 m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height of 2 m including labour dismantling the bund after completion of the work etc. complete. |
| 12 | OD170386/2026-2027:Construction of dry rubble packing for foundation of cross drainage works etc complete as per the direction of departmental officer at site. |
| 13 | 12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 14 | 12.8.E.1.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 - Using Concrete Mixer |
| 15 | 12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications |
| 16 | Traffic Safety Work |
| 17 | 8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes. |
| 18 | OD133466/2026-2027:Providing and fixing of DLP board with Non-retro-reflectorized Vinyl Sign with 1 years warranty manufactured Vinyl Printed Sheeting fixed over aluminum sheeting 2 nun thick/aluminium composite material sheeting 4 rum thick with area not exceeding 0.9 sqm with suitable back supporting flame of MS angle 40x40x6 and supported on GI pipe pole 50 I'm NB confirming to IS 123.9 firmly fixed to the ground by means of properly designed foundation with m1@ntilde; grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer as per approved draing and clause 801 including lettering symbols etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender