Tender For Construction Of Ration Ghat At Saribal In Lal Chowk Constituency
Tender Value
6.43 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
16 days left
EMD
12860
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ration Ghat At Saribal In Lal Chowk Constituency
BOQ
| Sl. No. | Item Description |
| 1 | Engagement of labourers for clearance of site etc. |
| 2 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet The cost of dismantled material scrap shall be duducted in the bill) |
| 3 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area below 40 sqcm ote:-The cost of dismantled servicable material shall be duducted in the bill) |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: (1 meter from cutting edge ) All kinds of soil |
| 5 | Lifting / disposal of excavated/ dismantelled unservicable material from site of work to dumping site by mechinical transport including loading,unloading beyond municipal limits. as per direction of Engineer-in-charge: |
| 6 | Providing and laying stone soling/ hand packed (above 75 mm) including all sorts of carriages by all means of transport upto site of work complete job . including head load |
| 7 | Providing & laying / Gsb Nallah Muck / Khak Bajri filling got by lorries including Loading, unloading. Ramming, dressing, and watering in layers and , including all sorts of carriages complete job.including head load |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 9 | Form work centering / shuttering including Strutting, Propping etc and removal of form work for:(a) Foudation, footings, basis, coloums etc |
| 10 | (b) Suspended floors, roofs, landings etc for mass concrete. |
| 11 | (c ) Edges of slabs and breaks in floors |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete job including all carriages complete job.(TMT Bars) |
| 16 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 17 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 18 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in super structrure including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 19 | 12mm thick cement plaster on walls in 1:6 mix (1 Cement :6 sand ) |
| 20 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 21 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 22 | Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete including all carriages complete job as per the directions of EIC Size of tile 600x600 mm |
| 24 | Providing Electrification (lightingng Points) using 1.50 mm and 2.50 mm guage insulated copper wire through PVC conduits including providing and fixing of 5/6 AMP ON/OFF Switches complete job as per directions at site including all carraiges by manual and mechnically complete job along with suitable size MS Box (Complete) the job also includes laying of PVC conduit 20 mm dia. |
| 25 | Providing Electrification (Heating Points) using 4.00mm guage insulated copper wire through PVC conduits including providing and fixing of 15 AMP (Class B) ON/OFF Switches complete job as per directions at site including all carraiges by manual and mechnically complete job along with suitable size Ms Box (with 4 mm dia wire) The job also includes SITC of GI box with modular plate and cover including P/f of 6 pin 15/16 Amp modular socket outlet and 15/16 Amp modular switch connections etc.The job also includes laying of PVC conduit 20 mm dia. |
| 26 | Providing and Fixing of Ceiling Fan 1200mm of Standard Quality and Make (Havells, Crompton, Bajaj, Usha) |
| 27 | Providing and fixing ball bearing for rolling shutters. |
| 28 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover |
| 29 | Chequerred precast cement concrete tiles 22mm thick (coloured) in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriages complete job as per the directions of EIC |
| 30 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including all necessary fittting complete job as per the directions of EIC forgein/KD Wood |
| 31 | Providing and fixing wire gauze shutters (35 mm thick using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws and all fittings as per direction of Engineer-in-charge :Forgein/KD Wood |
| 32 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job including all carriages complete job.(a) (Welded.) |
| 33 | Carriage of materials by mechanical transport from source upto the site of work complete job .A) Stone agg 40mm from Athwajan 7 kms lead |
| 34 | b) Stone agg 20mm from Athwajan 7 kms lead |
| 35 | Sand from Ganderbal 25 Km lead |
| 36 | Head Load of materials by manual labours for an lead of 100 mtrs as per the directions of the engineer incharge. a) 40mm Nominal Size Aggregate |
| 37 | B) sand /20 mm Agg |
| 38 | Bricks from 20 km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender