Defence Statutory Bodies & Commissions/Committees Closing in 5 days TDR #58298028

Tender For Special Repair To Bldg No Np-13 At Ge Command Testing Lab Udh Ur And Other Sanction Works Under Ge (South) Udh Ur

Issued by Statutory Bodies & Commissions/Committees · Reasi, Jammu and Kashmir
Tender Value
46.67 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
93000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No Np-13 At Ge Command Testing Lab Udh Ur And Other Sanction Works Under Ge (South) Udh Ur

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 20-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 27-Nov-2026

BOQ

Name of Work:- SPL REPAIR TO BLDG NO NP-13 AT GE COMMAND TESTING LAB UDH UR AND OTHER SANCTION WORKS UNDER GE (SOUTH) UDH UR
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : SPL REPAIR TO BLDG NO NP-13 AT GE COMMAND TESTING LAB UDHAMPUR AND OTHER SANCTION WORKS UNDER GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)-117/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words
2Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed by Engr-in-charge.
3Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed by Engr-in-charge.
4All as per ser item No.3 above but exc. 1.5 Sqm but n.exc 4 Sqm each, -ditto- complete all as specified and directed by Engr-in-charge.
5Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed by Engr-in-charge.
6Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge.
7Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and as directed by Engr-in-charge.
8Demolition of cement concrete floors and n exc 15cm thickness (below or above ground level ) all as specified and directed by Engr-in-charge.
9Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc all as specified and directed by Engr-in-charge.
10Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge.
11S&F Rotational molded (three layered as per IS 12701) white polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres and dismantling of old UNSV water tank of same capacity all as specified and directed by Engr-in-Charge.(Make- Sintex/ Rotex/ five star)
12Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and directed by Engr-in-charge.
13Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type of soil all as specified and directed by Engr-in-charge.
14Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25cm in any type of soil all as specified and directed by Engr-in-charge.
15Removing excavated material (soils) exceeding 250 m but n.exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed by Engr-in-charge.
16Removal of excavated material (spoil) n exc 50m and depositing where directed at a level nexc 1.5m above the starting point all as specified and directed by Engr-in-charge.
17Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and removing old water proofing treatment on roof all as specified and directed by Engr-in-charge.
18M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-charge.
19Reinforced cement concrete M-25 (20mm graded aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-charge.
20Reinforced cement concrete M-25 (20mm graded aggregates) design mix columns, pillars, piers,posts and struts complete all as specified and directed by Engr-in-charge.
21Reinforced cement concrete M-25 (20mm graded aggregates) design mix as in beams, cantilevers,bressummers, lintels over 1.5m span all as specified and directed by Engr-in-charge.
22Reinforced cement concrete M-25 (20mm graded aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.
23M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-charge.
24All as per item 22 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified and directed by Engr-in-charge.
25Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter for rough flat finished surfaces of concrete,complete all as specified and directed by Engr-in-charge.
26Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough flat finished surface of concrete, complete all as specified and directed by Engr-in-charge.
27Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete all as specified and directed by Engr-in-charge.
28Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-charge.
2910-12 mm thick gypsum boards seamless false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed by Engr-in-Charge. Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer.
30S&F in repairs solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick wood grain printed PVC sheet 35mm inclusive of solvent cement & PVC framework/beading as required and fixing at site on PVC frame, complete all as specified and directed by Engr-in-charge.
31M & L for Granite (of any type) work (table rubbed and polished) of size 1200 x 300mm in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) us- ing marble dust with admix- ture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:4 all as specified and directed by Engr-in-charge.
32M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6.complete all as specified and as directed by Engr-in-charge.
33M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed by Engr-in-charge.Note : Liquid Water proofing will be measured and paid separately.
34Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge.
35S&F for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned atjoints, supplied and fixed complete all as specified and as directed by Engr-in-charge.
36S&F 30mm thick Flush shutters, solid core construction, with BWR(boiling waterproof grade) plywood face panels or PVC flush door shutter, commercial type on both sides & one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Engr-in-charge. Make : Century/Green ply/Kit ply/Archid Note : - (i) Teak/Walnut veneer and satin lacquered finish plus brass trim. (ii) all edges shall be sealed with hardwood lipping or PU sealer with polish.
37S&F 1mm thick wood grain printed Sunmica/PVC sheet (Design as approved by Engr in Charge) fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and directed by Engr-in-charge.
38Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc all as specified and directed by Engr-in-charge.
39Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc all as specified and directed by Engr-in-charge.
40Supply and fix powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all as specified and directed by Engr-in-charge.
41S & F in repairs Door closer aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed by Engr-in-charge.
42S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-charge.
43M & L for sheet glass 5.5mm thick of one side view or etching on glass as approved by Engr in Charge, ordinary quality and glazing with beads fixed with metal panel pins, EPDM washers or connected accessories in each pane complete all as specified and directed by Engr-in-charge.
44S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as specified and directed by Engr-in-charge.
45Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed by Engr-in-charge.
46S&F Aluminium alloy powder coated (50 micron) anodized frame of section 85mm x 44mm x 2mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing, glazed with 5mm thick tinted glass / partly with 12mm thick prelaminated particle board, fixed in repairs complete all as specified and directed by Engr-in-charge.
47Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer all as specified and directed by Engr-in-charge.
48S&F Stainless Steel box type writing letters (Block, Romen, Italic or Indian) of size 300-450mm hight, 50mm wide and 10mm depth(thick) or 3D LED illuminated glow sign board acrylic letters (size & design as approved by Engr in charge) complete all as specified and directed by Engr-in-charge.
49S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed by Engr-in-charge.
50Supply and fix in 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and directed by Engr-in-charge.
51Supply and fix in stainless steel door handle, 250 mm size, complete all as specified and directed by Engr-in-charge.
52Supply and fix in 300mm long stainless steel sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and directed by Engr-in-charge.
53S & F of 150 mm size (Overall length of cover plate) floor door stopper of stainless steel and tongue, anodised, with hard drawn steel spring complete all as specified and directed by Engr-in-charge.
54S&F in repairs drapery rod of 25mm dia stainless steel 304 grade along with brackets and end caps of quality as approved by GE.
55Material and labour for joint free non skid ceramic colour tiles7 to 8mm thick (square/ rectangular) area of each tile n exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge.
56M&L glazed ceramic coloured tiles 300x450x7mm or 300x600x7mm thick, digital pattern with dark, light and highlighter combination as in skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm back coat in CM 1:3 all as specified and directed by Engr-in-charge.
57M & L for dark shade vitrified ceramic tiles 1200 x 600 x 10mm thick (square/rectangular) polished,area in floors etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match, and joints grouted with epoxy compound all as specified and directed by Engr-in-charge.
58All as per ser item No 56 above but in skirting over 10mm thick back coat in Cement mortar 1:3 all as specified and directed by Engr-in-charge.
59M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-charge.
60Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr-in-charge.
61Preparation of old wall surfaces with washing, rubbing down and stopping of distempered wall surfaces and applying one coat of OBD, white/ coloured complete all as specified and directed by Engr-in-charge.
62Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, all as specified and directed by Engr-in-charge.
63M&L for Preparation of Old plastered wall surfaces Finishing walls with textured paint of required shade : (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm over 1mm thick wall care putty complete all as specified and as directed by Engr-in-charge.
64M & L for applying 1 mm thick layer of wall putty on walls to give uniform surface, surface scrubed with emery paper and make surface good and clean complete all as specified and directed by Engr-in-charge.
65M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metre all as specified and directed by Engr-in-charge.
66M & L for providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed by Engr-in-charge.
67M & L for rendering 5 mm thick on fair faces of concrete surface in CM 1:3 finished even and smooth without using extra cement with WPC at the rate of 3% by weight of cement all as specified and directed by Engr-in-charge.
68Material and labour for applying One coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of roof all as specified and directed by Engr-in-charge.
69Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and directed by Engr-in-charge.Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.
70S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-16 all as specified and directed by Engr-in-charge.
71M&L for 75mm thick Plain cement concrete type B-2, 1:3:6 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc, complete all as specified and directed by Engr-in-charge.
72S&F Vitrified Heavy duty Dura stone Parking tiles of size n exc 0.36Sqm of (10 to 15)mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed by Engr-in-charge.
73Taking up or down 15 mm steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and directed by Engr-in-charge.
74All as per ser item No 72 but 20 mm all as specified and directed by Engr-in-charge.
75M & L 15mm dia galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engr-in-charge.
76All as per ser item No 74 but 20 mm all as specified and directed by Engr-in-charge.
77Supply and fixing \\"as in repair\\" ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge
78S&F in repair One piece EWC with including soft closing seat cover colour white with S Trap/P trap, wall distance 220/300 mm including all accessories complete all as specified and directed by Engr-in-charge. Make:- Cera, Jaquar, Parryware.
79S&F as in repairs fancy type Wall/Sink/ basin mixer Pillar tap, cast copper alloy, with capstan heads, chromiuk plated, screwed down high pressure with or without lettered \\"HOT\\" or \\"COLD\\" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and directed by Engr-in-charge.Make : Jaquar /Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
80S&F in repair WHB coloured 550 mm x 480 mm with Pedestal in repair as approved and complete all as specified and directed by Engr-in-Charge. Make :CERA Cat Part No (S2040115 & S2090111).
81S&F in repairs 1200 mm x 600 mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-charge.
82Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge.Make : Jaquar /Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
83S&F in repair 15 mm bore Overhead Shower 200X200mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified and directed by Engr-in-charge. Make: Jaquar, Cat Part No FLP-5273PM and equivalent in Kohler, GROHE.
84S&F in repair PVC connection 15mm bore with ptmt nuts of length 450mm all as specified and directed by Engr-in-charge.
85S&F in repairs CP Soap dish all as specified and directed by Engr-in-charge.
86S&F in repair 600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed by Engr-in-charge. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA.
87S&F in repairs Front Glass shelf with chromium plated guard rails, all as specified and directed by Engr-in-charge.
88S & F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed by Engr-in-charge.
89S&F in repair health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all as specified and directed by Engr-in-charge.
90Supply and fixing \\"as in repair\\" angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-charge.Make : Jaquar/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware
91S&F Almirah/kitchen cabinet/cupboard in required size at site made out 18 mm thick one side decorative lamination sheet consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5 screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete as per make and specification mention as per drawing with locking arrangement approved by Engr-in-Charge. Colour as approved by GE. (Make: Rajshree/Sintex or equivalent) complete all as specified and directed by Engr-in-charge.
92S&F in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed by Engr-in-charge.
93S&F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints aid in trenches or in floors all as specified and directed by Engr-in-charge.
94S&F in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed by Engr-in-charge.
95S& F 110 mm bore PVC SWR bends and fixed with joint sealent etc complete all as specified and directed by Engr-in-charge.
96M & L Vitrified tiles light Shade 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.42Sqm but not exc 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-charge.
97All as per item no. 95 here in before but in vertical surfaces such as skirting/dado and including 8-10mm thick rendering as back coating and screen bed in CM 1:4 etc complete all as specified and directed by Engr-in-charge.
98M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base of floor etc complete all as specified and directed by Engr-in-charge.
99S&F stepping stone vitrified tiles of size as approved by Engr in Charge 10-12mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed by Engr-in-charge.
100S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame complete all as specified and directed by Engr-in-charge.
101provinding cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span , cills , seismic and other similar bands, plinth courses, copings, Bed blocks, and the like including weathering slightly roundrd or chamfered angles and throating complete all as specified and directed by Engr-in-charge.
102S&F 12mm Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, Stainless steel handle 45omm size, sliders, rollers, stainless steel clips etc connected premium accessories as required complete all as specified and directed by Engr-in-charge.
103Venetian blinds of approved make, Horizontal or vertical or rolling type using fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, rolling arrangement/roller, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed by Engr-in-charge.
10410-12 mm thick gypsum boards seemess false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed by Engr-in-charge. Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer
105Providing & fixing false ceiling with Semiperforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in truehorizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items ( @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and all as specified and directed by Engr-in-charge.
106M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement all as specified and directed by Engr-in-charge.
107M&L for preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome primer complete all as specified and directed by Engr-in-charge.
108M&L for two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed by Engr-in-charge.
109M & L for 3D wall clading Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed by Engr-in-charge.
110M & L for aluminium composite pannel (ACP) HPL sheet of 6mm thick wall cladding? Façade (cut to arch shape or as directed) or in celling withbsunk or raised moulding / cop design approved by GE aluminium cover sheet thickness 0.5 mm panel length 2240mm and width 1220mm interior face coil coated with polyster, fixing with aluminium channel with aliminium/ steel rivet/screw in any position and height in any colour including prepration of concrete surface for ACP complete all as specified and directed by Engr-in-charge.
111Providing and fixing 3-Dimensional raised metal emblem/logo of Indian Army/MES, (1200*1200mm)in the approved design, fabricated from suitable grade stainless steel/metal sheet, CNC/laser cut to required shape, duly formed, finished and polished/painted, including necessary MS/SS supporting frame, brackets, cleats, fasteners and fixing arrangements, complete in all as specified and directed by Engr-in-charge.
112S & F mild stee box type writing letter ( Block Romen Italic or Indian ) of size 300-400mm height 50mm wide and 10mm depth (thick) or 3D LED illuminated glow sign board acrylic letter ( size & design as aaproved by Engr in Charge ) complete all as specified and directed by Engr-in-charge.
113Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed by Engr-in-charge.
114Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and directed by Engr-in-charge.
115Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-charge.
116Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure Non Asbestos Fiber Cement decorative Board (E-Board Classic) in a grid of GI systtem duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid all as specified and directed. Make : Everest Industries Ltd or equivalent as per IS 14862 all as specified and directed by Engr-in-charge.
117M & L for digital glossy finished double charged Vitrified tiles light Shade (8 to10) mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-charge.
118S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed by Engr-in-charge.
119Supply and fix in 150 mm long stainless steel tower bolts, fixed in screws complete all as specified and directed by Engr-in-charge.
120Supply and fix in stainless steel door handle, 250 mm size, complete all as specified and as directed by Engr-in-charge.
121Supply and fix in 300mm long stainless steel sliding door bolt with hasp, stapple (bolt type) and fixing clip of sheet, and fixing bolts and sliding bolts of stainless steel complete all as specified and as directed by Engr-in-charge.
122Supply and fixing of SS 304 mortise lock with handle set for 35mm thick flush shutter door, including cutting, chiseling, screws and all hardware complete all as specified and directed by Engr-in-charge.
123M&L Hardcore of gauge n exc. 63 mm, Broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed by Engr-in-charge.
124Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed by Engr-in-charge.
125Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed by Engr-in-charge.
126Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed by Engr-in-charge.
127Taking down Ceiling fans/Exhaust Fan, cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge.Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.
128Point wiring for one light point controlled by one-way 06 Amps switch using 1.5 sq mm FRLSH copper conductor,multi-stranded, PVC insulated and unsheathed, drawn through PVC conduit of minimum 20 mm diameter,medium grade, ISI marked, including all conduit accessories such as switch, bends, tees, junction boxes, elbows, etc, in concealed conduit or on surface/in channel fixed with GI saddle clamps duly screwed, as directed, includes providing modular sunken boxes with PVC back plates for mounting modular type switches, sockets and regulators, complete with modular cover plates, MS screws and cup washers. Providing continuous earth wire with 1.5 sq mm FRLSH copper conductor of 1100 volts grade, It includes cutting of chases and making good the same with cement mortar and finishing of disturbed surfaces with plaster of Paris/putty/distemper/colour wash to match the existing surface, complete all as specified and as directed by the Engineer-in-ChargeNOTE: Continuous earth wire of Green colour should be provided at each point with 1.5 sqmm FRLSH copper conductor cable of 1100 V grade up to ceiling rose/light fitting/fan rod.
129All as per item no 127 above but with cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board.
130All as per item no 127 above but with cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch.
131All as per item no 127 above but for one bell/buzzer point controlled by one bell push single pole one way .
132All as per item no 127 above but for one 3/6 pin 16 amps socket outlet point on an independent board with cables of size 2.50 sqmm.
133All as per Srl item No 127 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly.
134All as per Srl item No 127 but for 3 Pin 16 Amps socket outlet independent board with cable 4.00 Sq mm including copper PVC insulated PVC unsheathed 4.00 sq mm earth wire standard and connected to earth dolly.
135All as per Srl item No 127 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4.00 Sq mm including copper PVC insulated PVC unsheathed 4.00 sq mm earth wire standard and connected to earth dolly.
136All as per Item No. 127 But for one light point control by two nos two way switches with other Independent Board 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor single core multi stranded flexible cable and 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor as earth lead complete.
137S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge.
138S&F modular bell push, flush type, single pole, one way 5/6 Amp 230 volts complete all as specified and directed by Engr-in-charge.
139S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge.
140S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge.
141S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge.
142M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge. Make: Havells/ Legrand/Indoasian Elvira
143S&F in replacement electric bell ding dong dual type suitable for operation on AC 230 Volts, 50 Hz single pole as well as battery operated complete all as specified and directed by Engr-in-charge.
144S&F in replacement electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed by Engr-in-charge.
145S&F in replacement MCB Single Pole and Neutral, 32 to 63 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed by Engr-in-charge.
146S&F in replacement MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed by Engr-in-charge.
147Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete with all accessories as specified below all as specified and directed by Engr-in-charge :Rated Wattage: 10 WattsType: LED 2 feet Mirror Light ISI Marked.Input Voltage: 220–240 Volts AC, 50 HzColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) all as specified & directed.Power Factor: ≥ 0.90Driver: Inbuilt constant current electronic LED driver, BIS approvedBody: High grade polycarbonate / die-cast aluminium housingDiffuser: Opal / frosted polycarbonate diffuserProtection: IP54 or better (suitable for damp areas)Mounting: Surface wall/ceiling mountingLife Span: Minimum 30,000–50,000 burning hoursWarranty: Minimum 1 yearsMake: - Havells LED Pride Plus Neo Batten 10 W Cat Part No LHEXACP7IN1W010 or Equivalent make in Bajaj/C&S
148S& F in replacement LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core cable from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed by Engr-in-charge. Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specified by Engr-In-ChargePower Factor: ≥ 0.90Driver: Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 1 yearsMake: Philips / Wipro / Havells Note:- Quoated rate includes cutting & repair work if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects.
149S & F LED lights fitting 1x 20W, 230V,AC white/warm white decorative box type with driver,which gets automatically switched ON during Power cut and Run effectively up to 3-4 Hours, Lumens Capacity-2000lm ,PF-0.9(min) ,colour temp 6500K,CRI>80,IP 20 light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.Key SpecificationsWattage: 20 WType: LED Tube Light – Inverter/Emergency typeVoltage: 230 V AC, 50 HzBackup: 3–4 hours (inbuilt battery)Colour temperature: Cool White (~6500 K)Mounting: Wall/Ceiling mounted
150Earthing complete with galvanized steel earth plate electrodes 600 mm x600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia MS bars, 20mm bore light grade GI watering pipe with funnel, charcoal & Salt and 1 Bags of Benzonite powder weighs 25Kg. including excavation and earth work in any type of soil complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion.NOTE: On completion of earthing contractor should check earthing results and submit the test report to engr-in-charge. The test result should be less than 1 ohm, if desired results are not obtained then earthing shall be redone by the contractor at his own cost.
151Supplying, installing, testing and commissioning of 1200 mm sweep, 230V, 50Hz, BLDC ceiling fan complete with remote control, , power consumption not exceeding 35W at full speed, minimum air delivery 220 CMM, 5-star rated as per Bureau of Energy Efficiency, including down rod, canopy, shackle, mounting accessories, connection with existing wiring, testing and commissioning complete as required Power factor >0.95 downrod type suitable for ceiling installation ,Remote Control & Ring Light LED for speed Indication all as specified and Directed by Engr-In-Charge. Make- Atomberg Aris Contour Smart Ceiling Fan / Bajaj NNEX Dryft A95 BLDC / Havells Momenta Underlight IOT BLDC Ceiling Fan Note- (i) Warranty 3 years overall on fan & 5 years on BLDC Motors (ii) Rates shall includes all leads & mounting hardware testing,commisioning
152Supply, installation, testing and commissioning of 200mm sweep exhaust fan, BLDC motor operated, suitable for wall mounting in toilet, complete with all accessories as specified below:Sweep Size:200 mm , Round shape modular type Motor Type: BLDC motor, Power Consumption: Approx 6–8 WattsSpeed: Approx 2000 RPM Input Supply: 220–240 Volts AC, 50 HzNoise Level: Low noise type Body: High grade ABS / Polycarbonate body, glossy finishBlades: Aerodynamically designed plastic bladesMounting: Suitable for wall mounting with round cut-out approx. 200-220mmSafety: Inbuilt thermal overload protectionProtection: IPX4 Warranty: Minimum 2 years Including cutting of wall, making good damages, fixing with screws, connection with existing wiring, providing PVC flexible pipe if required, testing and commissioning complete in all respects all as specified and direceted by Engr-in-charge.
153S & F in replacement Sheet metal enclosure single door type for MCCB TPN DB 4 way with TPN MCCB 415 Volt Any rating from 100 Amp \\"C\\" Series with rupturing capacity 10 KA ,inculding providing thimble for out going cable, vertical type 415 volts with suitable rated busbar and neutral link, chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge. Make:- Havells / Schenider/ Legrand.
154S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed by Engr-in-charge.
155S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 08 way 240 volts with suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.
156S & F of Modular MCB protected control switch with AC socket outlet box complete with 240 Volts 20 Amps nicluding comlete all as specified and directed by Engr-in-charge.
157Supply and fixing of wall-mounted LED focus lamp, complete with LED light source of suitable wattage, adjustable focusing head, aluminium/metal body with approved finish, integral LED driver, wall mounting bracket, necessary screws, connectors and all required accessories, including connection to the existing electrical point, testing and commissioning, complete in all as specified and directed by Engr-in-charge.Suggested specifications:Type: Wall-mounted LED focus lampWattage: 3 W to 12 WBody: Aluminium / metalLight colour: Warm white / neutral whiteBeam angle: AdjustableFinish: Black / white / antique brass
158Supply and fixing 48 Watt LED hanging tube light complete with all necessary accessories, comprising LED tube/light fitting of suitable make, high-efficiency LED driver/SMPS, suitable suspension arrangement with GI/MS hanging rods/chains, ceiling rose/canopy, mounting hardware, connectors, terminals, flexible cable, cable glands/lugs where required, and all other accessories required to make the installation complete and fully functional, including testing and commissioning.Typical specification:Rating: 48 W LEDSupply: 230 V AC, 50 HzColour temperature: 3000–6500 K, as specifiedPower factor: ≥ 0.90Complete with LED driverHanging length: as required at siteSuitable for indoor installationComplete with all fixing and electrical accessories all as specified and directed by Engr-in-charge.
159S & F Tpn MCB protected DB box with Tpn Mcb 4P/3P 415 Volts 40/63 Amps icluding comlete all as specified and directed by Engr-in-charge.
160S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X6 Sqmm in PVC concealed conduit of suitable 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified and directed by Engr-in-charge. Including taking down old sub main wire.
161S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2X4 Sqmm in PVC concealed conduit of suitable dia including PVC insulated copper conductor cable 4 Sq mm as earth lead , also include taking down old sub main wire if so found all as specified and directed by Engr-in-charge.
162Supply and fixing 15 Watt square/round, concealed/recessed mounted LED light fitting, complete with high-efficiency LED module, electronic LED driver/SMPS, suitable recessed mounting frame/clips, diffuser, terminal block/connectors and all necessary accessories, including 1.5 sq.mm flexible copper connecting wire, fixing hardware and making connections to the point, complete in all respects as required for proper functioning, testing and commissioning.Typical specification:Rating: 12 W LEDSupply: 230 V AC, 50 HzMounting: Concealed/RecessedLED driver: IntegralColour temperature: 3000–6500 K, as specifiedPower factor: ≥ 0.90Complete with all accessories and fixing arrangements all as specified and directed by Engr-in-charge.
163S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4X10 Sqmm in PVC concealed conduit of suitable dia including PVC insulated copper conductor cable 10 Sq mm as earth lead also include taking down old sub main wire if so found all as specified and directed by Engr-in-charge.
164S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 4X6 Sqmm in PVC concealed conduit of suitable dia including PVC insulated copper conductor cable 6 Sq mm as earth lead also include taking down old sub main wire if so found all as specified and directed by Engr-in-charge.
165Supply and fixing of LED picture focus light, wall-mounted or surface-mounted, suitable for illuminating paintings, photographs, portraits, artwork and decorative wall frames, complete with LED light source, suitable wattage, adjustable focusing head, mounting bracket, driver/SMPS, necessary screws, connectors and all required accessories, including electrical connections, testing and commissioning, complete in all as specified and directed by Engr-in-charge. Suggested specifications:Type: LED picture focus lightWattage: 3 W to 12 WMounting: Wall-mounted / picture-frame-mountedBody: Aluminium / metalFinish: Antique brass / black / chromeColour temperature: 3000 K warm white or 4000 K neutral whiteBeam angle: Adjustable, as required
166Supply and fixing of LED strip light suitable for concealed installation in ceiling coves, false ceilings, wall recesses and decorative architectural profiles, comprising flexible LED strip of suitable wattage and colour temperature, complete with compatible LED driver/SMPS, aluminium profile/channel with diffuser wherever required, end caps, connectors, mounting clips, necessary wiring and accessories, including electrical connections, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.Suggested specifications:Type: Flexible LED strip / cove lightPower rating: 9 W, 12 W or 16 W per metre, as requiredSupply voltage: 12 V / 24 V DC or 230 V AC, as applicableColour: Warm white / neutral white / RGBInstallation: Concealed in ceiling cove or aluminium profileAccessories: LED driver/SMPS, connectors, profile and diffuser all as specified and directed by Engr-in-charge.
167S & F Modular TV Socket outlet single with inner and outer cover required module including TV cable required length from roof complete all as specified and directed by Engr-in-charge.
168S & F Single pole and neutral enclosure with a two pin and earth plug and socket modular type complete with 20A single pole MCB for AC all as specified and directed by Engr-in-charge. Make-Havells/Bajaj/C&S
169S & F of MCB Triple pole and neutral 240 volt any rating from 40 to 100 amps 'C' series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all as specified and directed by Engr-in-charge. Make:- Havells/ Legrand/Indoasian Elvira/ Schneider.
170S & F of MCB single pole 240 volt any rating from 10 to 40 amps 'C' series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all as specified and directed by Engr-in-charge. Make:- Havells/ Legrand/Indoasian Elvira/ Schneider.
171Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.
172Supply and fixing of 3-in-1 Cool Day light 6500K,Day Light 4000K,Warm light 3000K LED strip light consisting of high-brightness SMD 5050 LEDs mounted on flexible PCB strip, complete with controller, driver and accessories, suitable for decorative / cove lighting,compatible with Aluminium Profile light housing all as specified and directed by Engr-in-charge. Technical details:LED Type : SMD 5050 (3-in-1 chip)Operating Voltage : 12 / 24 Volt DCPower Consumption : Approx 14.4 W per metreLED Density : 60 LEDs per metre (minimum)Colour Output : Multi-colour with colour changing facilityControl : IR / RF remote controller with colour and dimming modesProtection : Minimum IP20 (Indoor) PCB Width : 10 mm flexible stripMounting : Self-adhesive backing / aluminium profile as requiredLife span : Minimum 30,000 – 50,000 burning hours Make- Bajaj IVORA or techno commercial equivalent make in Philips/SYSKA
173Supply and fixing Lighting(16 x16 mm) Aluminium Round LED Strip Lights 1 Mtr Round Profile LEd Corner channel profile with diffused end cap and mounting clamps with space for mounting LED strip of suitable size complete all as specified and directed by Engr-in-charge.
174S&F 15W LED Ceiling/recess light panel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specified and directed by Engr-in-charge. Make - Havells/ Wipro/Syska
175S&F 36W LED Ceiling/recess light 2 feet x 2 feet panel for recess mounting/surface mounting warm white colour/day light which provides soft-light and glare free symmetrical illumination complete all as specified and directed by Engr-in-charge. Make - Havells/ Wipro/Syska
176S & F decorative modular LED Red/Green light surface mounting 3W fixture luminaire for engagement light complete all as specified and directed by Engr-in-charge.
177S & F of decorative wall mounting 1X 9W fixture with frosted glass along with 9W warm white bulb GLS lamp luminaire complete all as specified and directed by Engr-in-charge.
178Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweeps 250mm along with all electrical wire connection all as specified and directed by Engr-in-charge.
179S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified and directed by Engr-in-charge.
180Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles all as specified and directed by Engr-in-charge.
181Supply, laying and testing of Service cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core all as specified and directed by Engr-in-charge.
182S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2.5 Sqmm in PVC concealed conduit/casing capping 25mm dia including PVC insulated copper conductor cable 2.5 Sq mm as earth lead all as specified and directed by Engr-in-charge. Make: Havells / Finolex / Polycab.
183S&F Robustly designed IP65/IK10 Bollard garden light 15W, Innovative design with uniformly lit diffuser at the upper portion acts a beacon of path guidence in a landscape environment light to be fixed on cement conctrete in bed in foundations filling and mass contrete and making electrical connection with copper cable all as specified and directed by Engr-in-charge. Make: Philips cat part no. BCP150 LED150/NW PSU 220-240V 7043 equivalent in Havells/Crompton
184S & F Street light Bracket complete made of GI pipe of suitable size, medium grade 1 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall all as specified and directed by Engr-in-charge.
185S & F in repairs LED Flood light fitting of 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-charge. Make : Phillips/ Havells/syska/Bajaj.
186Supply, installation, testing and commissioning of 40 Watt LED gate light fitting 220–240 Volts AC, 50 Hz, suitable for outdoor use at main gate / entrance area, complete with all accessories as specified below:Rated Wattage: 40 WattsType: LED outdoor wall mounted / bracket mounted light fittingLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedBody: Die-cast aluminium housing with powder coated finishDiffuser: Toughened glass / high impact polycarbonateProtection: IP65 or better (weatherproof outdoor type)Surge Protection: Minimum 2.5 kV internal Mounting: Suitable for wall / gate pillar mountingMake: Philips / Wipro / Havells /Crompton / BajajIncluding fixing on gate pillar/wall with suitable MS bracket if required, connection with existing wiring, earthing, testing and commissioning complete in all respects all as specified and directed by Engr-in-charge.
187S&F for modular switch 6 Amps single pole two way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge.
188S & F calling Bell ding dong 230 volts single pole 50Hz complete all as specified and directed by Engr In charge. Make: Anchor Roma/ Legrand/ Indo Asian .
189S & F Exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 225mm all as direceted & specified by Engr-in-charge. Make:Havells/Bajaj/CG.
190S & F LED Decorative, STYLO wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LeD lamp B22 base.with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.
191S & F in repairs LED decorative down light fitting/recess mounted round type white/ warm white with high out put diffuser 12 watt 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge.
192Supply and fixing in repairs LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge.
193S & F in repairs LED wall mounting mirror type white/ warm white pitcture light fitting with high out put diffuser 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge. Make: Philips /Bajaj/Havells
194Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-charge.
195S & F in repairs LED panel decorative down light fitting/recess mounted square type white/ warm white 2X2 36W with high out put diffuser 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58298028
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 46.67 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No Np-13 At Ge Command Testing Lab Udh Ur And Other Sanction Works Under Ge (South) Udh Ur
Basic Detail
Tender No GE/S(U)-117/2026-27
Bidding Type Tender
Location
City Reasi
State Jammu and Kashmir
Key Dates
Publish Date 20 Nov 2026
Submission Date 27 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 46.67 Lakhs
Tender Fee 500
EMD 93000
Exemption Not Available
Document List
117tenderdoc.pdf
BOQ_893405.xls
d75e61db-7a74-4966-be9a-a2be03a11459.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
pdf

117tenderdoc.pdf

xls

BOQ_893405.xls

html

d75e61db-7a74-4966-be9a-a2be03a11459.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender