Tender For Special Repair To Bldg No P-25, P-26, P-29 & P-30 Of Asc (Sup) At Suratgarh Mil Stn Under Ge(A) Suratgarh
Tender Value
82.48 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
17 days left
EMD
1.48 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-25, P-26, P-29 & P-30 Of Asc (Sup) At Suratgarh Mil Stn Under Ge(A) Suratgarh
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for and complete all as specified and as directed. |
| 2 | M&L for Cement concrete type B-0, 25 mm thick 1:2:4 (12.5 mm graded aggregate) complete all as specified and as directed. |
| 3 | M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ( Bees wax) complete all as specified over 15 mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-In-Charge. |
| 4 | M&L for machine cut kota stone 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed or 10 mm thick rendering CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing(Bees wax) complete all as specified and as directed. |
| 5 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-charge. |
| 6 | M&L for old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified and as directed. |
| 7 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for ( reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 8 | M&L for Formwork to edges of concrete slab flats for rough finished surface of concrete, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed. |
| 9 | M & L for Reinforced cement concrete (nominal mix) in Type B1 1:2:4 (20 mm graded aggregate) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 10 | M&L for Formwork to flat Rough finished surfaces of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 11 | S&F for TMT steel bars 6-8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slab,hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 12 | M & L for hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 13 | M&L for Cement concrete type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified and as directed. |
| 14 | M & L for Cement concrete type B-1,1:2:4 (20mm graded aggregate) complete all as specified and as directed. |
| 15 | Taking down cement plaster or cement lime plaster on stone surface/brick surfaces of walls including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge. |
| 16 | M&L for cement plaster 1:6 Rendering 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 17 | M&L for cement plaster 1:3 Rendering 5 mm thick on ceiling finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 18 | M&L for cement plaster 1:4 rendering 15 mm thick on external surface using water proofing compound 3% weight of cement finished even and smooth (without using extra cement) complete all as specified and as directed. Note:-WPC will be measured and paid separately |
| 19 | Material & Labour for preperation and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 20 | M&L for preparation of newly decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface, filling of cracks etc and applying two coats of oil bound distemper over 1 to 2 mm wall care putty over a coat of pirmer complete all as specified and as directed by Engineer-in-Charge. |
| 21 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-charge. |
| 22 | M&L for preparation of old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface, filling of cracks etc and applying one coat of oil bound distemper complete all as specified and as directed by Engineer-in-Charge. |
| 23 | M&L for preparation of old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface, filling of cracks etc and applying two coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and as directed. |
| 24 | M&L for preparation of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, filling cracks with wall care putty etc and applying one coat of white wash complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Rough excavation not exceeding 1.5 m deep and getting out any type of soil complete all as specified and as directed. |
| 26 | Forming embankments of soil including raising (or lowering) earth, spreading in layers n exc. 30cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specified and as directed. |
| 27 | Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100 m where directed, complete all as specified and as directed. |
| 28 | Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100 m, where directed complete all as specified and as directed. |
| 29 | M&L for PCC 1:2:4 type C 2 (12.5 mm graded aggregate) in roof as padding complete all as specified and as directed by Engr-in-Charge. |
| 30 | M&L for Rendering 10 mm thick in cement plaster 1:4 with 3% weight of cement WPC on roof, fair faces of brick work or concrete surfaces all as specified and as directed by Engr -in - charge. Note : WPC will be measured and paid separately |
| 31 | M&L for Roof Treatment in as specified below and as directed : (a) Removal of existing PCC/Brick Bat coba/Mud Phuska/APP membrane from the roof stacking the reusable material and disposal of unserviceable rubbish outside the campus as directed by Engineer-in-Charge.(b) Cleaning, washing of surface and removing any debris, Surface should be free from any loose paint, dust or grease. (c) Providing PCC coving/gola along vertical parapets of size 75mmx75mm with concrete Mix(1:2:4),type B-I using water proofing compound of approved make etc complete all as specified as directed by engineer-in-charge (d) The surface shall be treated with PU Elastoseal primer with Epoxy Primer to seal the pores and enhance the adhesion of the coating, supplying and applying single component waterproofing liquid membrane based on pure,elastomeric, polyurethane resin cold applied of spray/brush applied membrane with an elongation of 650%_+50 and tensile Strength not less than 2 MPa,crack briding ability not less than 2 mm.No leakage upto 5mm bars of water pressure.Shore hardness > 50 Shore.The Minimum thickness to be applied shall be 1.5 mm (overall) in two layer (each layer 750 micron) or as per manufacturer's instructions. (e) Providing & laying protective Geotextile fabric 150 GSM over the entire membrane with proper overlap of 75 mm,upto 300 mm on walls.(f) The complete treatment to be carried out by authorised applicator of waterproofing manufacturer.Make : Asian/Fosroc/ Dr Fixit/STP/Pidilite etcNote : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer in Charge.(ii) The plan area of floor shall be considered for payment . |
| 32 | Supply only water proofing compound complete all as specified and as directed by Engineer in Charge |
| 33 | Taking down eaves gutters and rain water pipe (any size or any pattern) including all fittings, heads, shoes, bends, swan necks etc (measured over all as fixed along the central line over fittings and accessories) complete all as specified and as directed by Engineer -in-charge. |
| 34 | S & F PVC (SWR) pipes bore 110 mm single socketed in any length with rubber ring joints fixed to walls including all bend,T,access door bend,branch pieces etc. and including low carbon hot roll gauge corrected oil pickled & drawn pipe supporting clamping system 32x3 mm with rib and notch are hot dip galvanised and Zn, Al flake coating with necessary clamps to fix and hold pipe complete all as specified and as directed. (Note: Detail of Pipe supporting system is all as per Drg NO -BTD-916). |
| 35 | Taking down carefully or drawing out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators, MCB, DB, earth plug, lamp, street light etc (excluding MS sunken boxes) and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
| 36 | Taking down carefully or drawing out from conduit, existing copper / aluminium point wiring for light, fan, bell, socket, power point etc complete including fixture and fittings such as switches, sockets, ceiling rose, pendent holder, light fittings, top sheet covers, fan regulators, MCB, DB, earth plug, lamp, street light etc (excluding MS sunken boxes) and making good the disturbed surfaces of wall/ceiling complete all as specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender