Defence Statutory Bodies & Commissions/Committees Closing in 5 days TDR #58295381

Bids Are invited for Repair And Maintenance Of Ganga Dwar

Issued by Statutory Bodies & Commissions/Committees · Patna, Bihar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Nov 2026
5 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Not Available
Quantity
3584

Project Description

Bids Are invited for Excavate Foundation Pit In Softloose Soil, Not Exceeding 1.5 M Deep, 10 M2 On Plan , Provide And Lay Plain Cement Concrete 1 4 8 With 40 Mm Graded Stone Aggregate, 100 Mm , Sand Filling Under Floors Or In Foundations Including Watering And Consolidation , Bore 300 Mm Diameter Pile Holes In Soil To 6 M Depth Including Setting Out Excavation , Provide And Place M15 Concrete 1 1 5 3 With 20 Mm Aggregate In Pile Shafts Including Compaction And Curing Boring Reinforcement And Bulb Concrete Extra As Approved , Supply, Cut, Bend And Fix 4 Nos. 20 Mm Tmt Bars Per Pile, Including Anchorage, Binding Wire And Securing. Excludes Pile Cap, Column And Beam Steel. , Supply, Cut, Bend And Fix 8 Mm Tmt Rings At 125 Mm Centres In Pile Cages, Including Hooks And Binding Wire. Excludes Column And Beam Links. , Provide And Place M15 Concrete 1 1.5 3 With 20 Mm Aggregate In Pile Caps Including Mixing Vibration And Curing Reinforcement And Formwork Measured Separately , Provide And Place M15 Concrete 1 1 5 3 With 20 Mm Aggregate In 800 X 800 Mm Columns Of 7 3152 M Height Including Mixing Placing Vibration And Curing Reinforcement And Formwork Separate , Provide And Place M15 Concrete 1 1.5 3 With 20 Mm Aggregate In 450 Mm Wide And 900 Mm Deep Connecting Beam Including Vibration And Curing Reinforcement And Formwork Separate , Return Selected Excavated Soil Around Foundations In Layers Not Exceeding 250 Mm Including Watering And Thorough Compaction To Required Level. , Remove Surplus Excavated Soil From Cap Pits To An Approved Location Within 50 M And Deposit As Directed, With Lift Not Exceeding 1.5 M Above The Starting Level. , Provide, Erect, Maintain And Remove Formwork To Vertical Sides Of Pile Caps, For Concrete Surfaces Receiving Subsequent Covering, Including Supports, Bracing And Necessary Staging. , Provide, Erect, Maintain And Remove Formwork To Rectangular Rcc Columns, Including Staging, Bracing And All Supports, For Rough Concrete Surfaces Receiving Granite Finishes. , Provide, Erect, Maintain And Remove Formwork To Beam Sides And Soffit, Including Adequately Designed Staging, Bracing And All Supports, For Rough Concrete Surfaces Receiving Granite Finishes. , Supply Cut Bend And Fix Fe500d Tmt Bars 10 Mm And Above In Pile Caps Columns And Beams Including Binding And Fixing. Pile Main Bars Excluded And Measured Separately. , Supply, Cut, Bend And Fix 8 Mm Tmt Bars As Column Beam Links, Stirrups And Cross Ties , Build 230 Mm Thick Curved Brick Crest Above Rcc Beam Using Subclass B Burnt Clay Bricks In Cement Mortar 1 4 Including Cutting Bonding Scaffolding And Curing As Per Approved Profile. , Supply And Fix 20 Mm Polished Granite On Column Faces In Cement Mortar 1 4 Including Cutting Edge Finishing And Pointing Concealed Faces And Mechanical Restraints Excluded , Supply And Fix 20 Mm Polished Granite On Beam Sides Soffit And Top In Cement Mortar 1 4 Including Cutting Edge Finishing And Pointing Masonry Bearing And Soffit Restraints Excluded , Supply And Fix 12 Mm Polished Granite Veneer On Both Faces Of Brick Crest In Cement Mortar 1 3 Including Profile Cutting And Pointing Subject To Schedule Approval , Supply And Fix 20 Mm Polished Granite Strips On Curved Brick Crest Including Profile Cutting Edge Finishing Bedding And Pointing With Curved Fabrication Allowance. , Provide Stainless Steel Anchors For Elevated Granite Cladding And Soffit Including Drilling Approved Fixings And Installation As Per Approved Design And Actual Details. , Carry Out Surface Excavation In Soft Loose Soil, Average 240 Mm Deep And Not Exceeding 300 Mm , Remove Surplus Soil From Paving Formation To An Approved Location Within 50 M , Provide And Lay 150 Mm Thick Pcc 1 2 4 With 40 Mm Aggregate Including Base Preparation Compaction Finishing Curing And Panel Construction To Approved Levels And Falls Cobble Finish Separate. , Supply And Lay 60 Mm Sandstone Cobbles Over 30 Mm Mortar Bedding 1 4 On Pcc Including Cutting Joint Filling Compaction Curing And Finishing To Approved Pattern And Falls. , Supply And Install Carved Sandstone Cupola 4 Ft High And 3.5 Ft Square , Supply And Fix 12 W Ip65 Outdoor Led Lights With Driver Brackets And Connectors Including Connection And Testing Subject To Approved Model Point Wiring Separate. , Provide Primary Wiring For Two Light Groups Using 1.5 Mm2 Frls Copper Wires In Pvc , Provide Wiring For 18 Additional Light Points Using 1.5 Mm2 Frls Copper Wires In Pvc Conduit On Existing Switch Circuit As Per Ssr Scope. , Supply And Fix 914.4 Mm Brass Sun Motif On Crest Including Fabrication Polishing , Provisional Sum For Brass Lettering Per Pillar Including Fixing And Protective Coating Final Text Language Size Quantity Thickness And Design Subject To Approval , Provisional Sum For 20 M Electrical Feeder Weatherproof Panel With Mcb Rccb Timer Two Gi Plate Earthing Sets Pits Leads And Accessories As Per Approved Design Excludes Utility Charges , Provide 12 Mm Cement Plaster In Mortar 1 4 To Columns Beams And Brick Crest Including Surface Preparation Keying Levelling And Curing For Granite Fixing. Granite Bedding Separate. , Provide 12 Mm Cement Plaster In Mortar 1 4 To Beam Soffit Including Preparation Staging Levelling And Curing As Granite Substrate With Ceiling Extra Granite Anchors To Engage Structural Concrete

BOQ

Sl. No. Item TitleItem Description
1Excavate foundation pit in softloose soil, not exceeding 1.5 m deep, 10 m2 on planExcavate foundation pit in softloose soil, not exceeding 1.5 m deep, 10 m2 on plan
2Provide and lay plain cement concrete 1 4 8 with 40 mm graded stone aggregate, 100 mmProvide and lay plain cement concrete 1 4 8 with 40 mm graded stone aggregate, 100 mm
3sand filling under floors or in foundations including watering and consolidationsand filling under floors or in foundations including watering and consolidation
4Bore 300 mm diameter pile holes in soil to 6 m depth including setting out excavationBore 300 mm diameter pile holes in soil to 6 m depth including setting out excavation
5Provide and place M15 concrete 1 1 5 3 with 20 mm aggregate in pile shafts including compaction and curing Boring reinforcement and bulb concrete extra as approvedProvide and place M15 concrete 1 1 5 3 with 20 mm aggregate in pile shafts including compaction and curing Boring reinforcement and bulb concrete extra as approved
6Supply, cut, bend and fix 4 nos. 20 mm TMT bars per pile, including anchorage, binding wire and securing. Excludes pile cap, column and beam steel.Supply, cut, bend and fix 4 nos. 20 mm TMT bars per pile, including anchorage, binding wire and securing. Excludes pile cap, column and beam steel.
7Supply, cut, bend and fix 8 mm TMT rings at 125 mm centres in pile cages, including hooks and binding wire. Excludes column and beam links.Supply, cut, bend and fix 8 mm TMT rings at 125 mm centres in pile cages, including hooks and binding wire. Excludes column and beam links.
8Provide and place M15 concrete 1 1.5 3 with 20 mm aggregate in pile caps including mixing vibration and curing Reinforcement and formwork measured separatelyProvide and place M15 concrete 1 1.5 3 with 20 mm aggregate in pile caps including mixing vibration and curing Reinforcement and formwork measured separately
9Provide and place M15 concrete 1 1 5 3 with 20 mm aggregate in 800 x 800 mm columns of 7 3152 m height including mixing placing vibration and curing Reinforcement and formwork separateProvide and place M15 concrete 1 1 5 3 with 20 mm aggregate in 800 x 800 mm columns of 7 3152 m height including mixing placing vibration and curing Reinforcement and formwork separate
10Provide and place M15 concrete 1 1.5 3 with 20 mm aggregate in 450 mm wide and 900 mm deep connecting beam including vibration and curing Reinforcement and formwork separateProvide and place M15 concrete 1 1.5 3 with 20 mm aggregate in 450 mm wide and 900 mm deep connecting beam including vibration and curing Reinforcement and formwork separate
11Return selected excavated soil around foundations in layers not exceeding 250 mm including watering and thorough compaction to required level.Return selected excavated soil around foundations in layers not exceeding 250 mm including watering and thorough compaction to required level.
12Remove surplus excavated soil from cap pits to an approved location within 50 m and deposit as directed, with lift not exceeding 1.5 m above the starting level.Remove surplus excavated soil from cap pits to an approved location within 50 m and deposit as directed, with lift not exceeding 1.5 m above the starting level.
13Provide, erect, maintain and remove formwork to vertical sides of pile caps, for concrete surfaces receiving subsequent covering, including supports, bracing and necessary staging.Provide, erect, maintain and remove formwork to vertical sides of pile caps, for concrete surfaces receiving subsequent covering, including supports, bracing and necessary staging.
14Provide, erect, maintain and remove formwork to rectangular RCC columns, including staging, bracing and all supports, for rough concrete surfaces receiving granite finishes.Provide, erect, maintain and remove formwork to rectangular RCC columns, including staging, bracing and all supports, for rough concrete surfaces receiving granite finishes.
15Provide, erect, maintain and remove formwork to beam sides and soffit, including adequately designed staging, bracing and all supports, for rough concrete surfaces receiving granite finishes.Provide, erect, maintain and remove formwork to beam sides and soffit, including adequately designed staging, bracing and all supports, for rough concrete surfaces receiving granite finishes.
16Supply cut bend and fix Fe500D TMT bars 10 mm and above in pile caps columns and beams including binding and fixing. Pile main bars excluded and measured separately.Supply cut bend and fix Fe500D TMT bars 10 mm and above in pile caps columns and beams including binding and fixing. Pile main bars excluded and measured separately.
17Supply, cut, bend and fix 8 mm TMT bars as column beam links, stirrups and cross tiesSupply, cut, bend and fix 8 mm TMT bars as column beam links, stirrups and cross ties
18Build 230 mm thick curved brick crest above RCC beam using subclass B burnt clay bricks in cement mortar 1 4 including cutting bonding scaffolding and curing as per approved profile.Build 230 mm thick curved brick crest above RCC beam using subclass B burnt clay bricks in cement mortar 1 4 including cutting bonding scaffolding and curing as per approved profile.
19Supply and fix 20 mm polished granite on column faces in cement mortar 1 4 including cutting edge finishing and pointing Concealed faces and mechanical restraints excludedSupply and fix 20 mm polished granite on column faces in cement mortar 1 4 including cutting edge finishing and pointing Concealed faces and mechanical restraints excluded
20Supply and fix 20 mm polished granite on beam sides soffit and top in cement mortar 1 4 including cutting edge finishing and pointing Masonry bearing and soffit restraints excludedSupply and fix 20 mm polished granite on beam sides soffit and top in cement mortar 1 4 including cutting edge finishing and pointing Masonry bearing and soffit restraints excluded
21Supply and fix 12 mm polished granite veneer on both faces of brick crest in cement mortar 1 3 including profile cutting and pointing subject to schedule approvalSupply and fix 12 mm polished granite veneer on both faces of brick crest in cement mortar 1 3 including profile cutting and pointing subject to schedule approval
22Supply and fix 20 mm polished granite strips on curved brick crest including profile cutting edge finishing bedding and pointing with curved fabrication allowance.Supply and fix 20 mm polished granite strips on curved brick crest including profile cutting edge finishing bedding and pointing with curved fabrication allowance.
23Provide stainless steel anchors for elevated granite cladding and soffit including drilling approved fixings and installation as per approved design and actual details.Provide stainless steel anchors for elevated granite cladding and soffit including drilling approved fixings and installation as per approved design and actual details.
24Carry out surface excavation in soft loose soil, average 240 mm deep and not exceeding 300 mmCarry out surface excavation in soft loose soil, average 240 mm deep and not exceeding 300 mm
25Remove surplus soil from paving formation to an approved location within 50 mRemove surplus soil from paving formation to an approved location within 50 m
26Provide and lay 150 mm thick PCC 1 2 4 with 40 mm aggregate including base preparation compaction finishing curing and panel construction to approved levels and falls Cobble finish separate.Provide and lay 150 mm thick PCC 1 2 4 with 40 mm aggregate including base preparation compaction finishing curing and panel construction to approved levels and falls Cobble finish separate.
27Supply and lay 60 mm sandstone cobbles over 30 mm mortar bedding 1 4 on PCC including cutting joint filling compaction curing and finishing to approved pattern and falls.Supply and lay 60 mm sandstone cobbles over 30 mm mortar bedding 1 4 on PCC including cutting joint filling compaction curing and finishing to approved pattern and falls.
28Supply and install carved sandstone cupola 4 ft high and 3.5 ft squareSupply and install carved sandstone cupola 4 ft high and 3.5 ft square
29Supply and fix 12 W IP65 outdoor LED lights with driver brackets and connectors including connection and testing subject to approved model Point wiring separate.Supply and fix 12 W IP65 outdoor LED lights with driver brackets and connectors including connection and testing subject to approved model Point wiring separate.
30Provide primary wiring for two light groups using 1.5 mm2 FRLS copper wires in PVCProvide primary wiring for two light groups using 1.5 mm2 FRLS copper wires in PVC
31Provide wiring for 18 additional light points using 1.5 mm2 FRLS copper wires in PVC conduit on existing switch circuit as per SSR scope.Provide wiring for 18 additional light points using 1.5 mm2 FRLS copper wires in PVC conduit on existing switch circuit as per SSR scope.
32Supply and fix 914.4 mm brass sun motif on crest including fabrication polishingSupply and fix 914.4 mm brass sun motif on crest including fabrication polishing
33Provisional sum for brass lettering per pillar including fixing and protective coating Final text language size quantity thickness and design subject to approvalProvisional sum for brass lettering per pillar including fixing and protective coating Final text language size quantity thickness and design subject to approval
34Provisional sum for 20 m electrical feeder weatherproof panel with MCB RCCB timer two GI plate earthing sets pits leads and accessories as per approved design Excludes utility chargesProvisional sum for 20 m electrical feeder weatherproof panel with MCB RCCB timer two GI plate earthing sets pits leads and accessories as per approved design Excludes utility charges
35Provide 12 mm cement plaster in mortar 1 4 to columns beams and brick crest including surface preparation keying levelling and curing for granite fixing. Granite bedding separate.Provide 12 mm cement plaster in mortar 1 4 to columns beams and brick crest including surface preparation keying levelling and curing for granite fixing. Granite bedding separate.
36Provide 12 mm cement plaster in mortar 1 4 to beam soffit including preparation staging levelling and curing as granite substrate with ceiling extra Granite anchors to engage structural concreteProvide 12 mm cement plaster in mortar 1 4 to beam soffit including preparation staging levelling and curing as granite substrate with ceiling extra Granite anchors to engage structural concrete

AI Tender Summary

OUR REF NO 58295381
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 10-11-2026
Authority
Authority Name Department Of Defence
Work Description Bids Are invited for Excavate Foundation Pit In Softloose Soil, Not Exceeding 1.5 M Deep, 10 M2 On Plan , Provide And Lay Plain Cement Concrete 1 4 8 With 40 Mm Graded Stone Aggregate, 100 Mm , Sand Filling Under Floors Or In Foundations Including Watering And Consolidation , Bore 300 Mm Diameter Pile Holes In Soil To 6 M Depth Including Setting Out Excavation , Provide And Place M15 Concrete 1 1 5 3 With 20 Mm Aggregate In Pile Shafts Including Compaction And Curing Boring Reinforcement And Bulb Concrete Extra As Approved , Supply, Cut, Bend And Fix 4 Nos. 20 Mm Tmt Bars Per Pile, Including Anchorage, Binding Wire And Securing. Excludes Pile Cap, Column And Beam Steel. , Supply, Cut, Bend And Fix 8 Mm Tmt Rings At 125 Mm Centres In Pile Cages, Including Hooks And Binding Wire. Excludes Column And Beam Links. , Provide And Place M15 Concrete 1 1.5 3 With 20 Mm Aggregate In Pile Caps Including Mixing Vibration And Curing Reinforcement And Formwork Measured Separately , Provide And Place M15 Concrete 1 1 5 3 With 20 Mm Aggregate In 800 X 800 Mm Columns Of 7 3152 M Height Including Mixing Placing Vibration And Curing Reinforcement And Formwork Separate , Provide And Place M15 Concrete 1 1.5 3 With 20 Mm Aggregate In 450 Mm Wide And 900 Mm Deep Connecting Beam Including Vibration And Curing Reinforcement And Formwork Separate , Return Selected Excavated Soil Around Foundations In Layers Not Exceeding 250 Mm Including Watering And Thorough Compaction To Required Level. , Remove Surplus Excavated Soil From Cap Pits To An Approved Location Within 50 M And Deposit As Directed, With Lift Not Exceeding 1.5 M Above The Starting Level. , Provide, Erect, Maintain And Remove Formwork To Vertical Sides Of Pile Caps, For Concrete Surfaces Receiving Subsequent Covering, Including Supports, Bracing And Necessary Staging. , Provide, Erect, Maintain And Remove Formwork To Rectangular Rcc Columns, Including Staging, Bracing And All Supports, For Rough Concrete Surfaces Receiving Granite Finishes. , Provide, Erect, Maintain And Remove Formwork To Beam Sides And Soffit, Including Adequately Designed Staging, Bracing And All Supports, For Rough Concrete Surfaces Receiving Granite Finishes. , Supply Cut Bend And Fix Fe500d Tmt Bars 10 Mm And Above In Pile Caps Columns And Beams Including Binding And Fixing. Pile Main Bars Excluded And Measured Separately. , Supply, Cut, Bend And Fix 8 Mm Tmt Bars As Column Beam Links, Stirrups And Cross Ties , Build 230 Mm Thick Curved Brick Crest Above Rcc Beam Using Subclass B Burnt Clay Bricks In Cement Mortar 1 4 Including Cutting Bonding Scaffolding And Curing As Per Approved Profile. , Supply And Fix 20 Mm Polished Granite On Column Faces In Cement Mortar 1 4 Including Cutting Edge Finishing And Pointing Concealed Faces And Mechanical Restraints Excluded , Supply And Fix 20 Mm Polished Granite On Beam Sides Soffit And Top In Cement Mortar 1 4 Including Cutting Edge Finishing And Pointing Masonry Bearing And Soffit Restraints Excluded , Supply And Fix 12 Mm Polished Granite Veneer On Both Faces Of Brick Crest In Cement Mortar 1 3 Including Profile Cutting And Pointing Subject To Schedule Approval , Supply And Fix 20 Mm Polished Granite Strips On Curved Brick Crest Including Profile Cutting Edge Finishing Bedding And Pointing With Curved Fabrication Allowance. , Provide Stainless Steel Anchors For Elevated Granite Cladding And Soffit Including Drilling Approved Fixings And Installation As Per Approved Design And Actual Details. , Carry Out Surface Excavation In Soft Loose Soil, Average 240 Mm Deep And Not Exceeding 300 Mm , Remove Surplus Soil From Paving Formation To An Approved Location Within 50 M , Provide And Lay 150 Mm Thick Pcc 1 2 4 With 40 Mm Aggregate Including Base Preparation Compaction Finishing Curing And Panel Construction To Approved Levels And Falls Cobble Finish Separate. , Supply And Lay 60 Mm Sandstone Cobbles Over 30 Mm Mortar Bedding 1 4 On Pcc Including Cutting Joint Filling Compaction Curing And Finishing To Approved Pattern And Falls. , Supply And Install Carved Sandstone Cupola 4 Ft High And 3.5 Ft Square , Supply And Fix 12 W Ip65 Outdoor Led Lights With Driver Brackets And Connectors Including Connection And Testing Subject To Approved Model Point Wiring Separate. , Provide Primary Wiring For Two Light Groups Using 1.5 Mm2 Frls Copper Wires In Pvc , Provide Wiring For 18 Additional Light Points Using 1.5 Mm2 Frls Copper Wires In Pvc Conduit On Existing Switch Circuit As Per Ssr Scope. , Supply And Fix 914.4 Mm Brass Sun Motif On Crest Including Fabrication Polishing , Provisional Sum For Brass Lettering Per Pillar Including Fixing And Protective Coating Final Text Language Size Quantity Thickness And Design Subject To Approval , Provisional Sum For 20 M Electrical Feeder Weatherproof Panel With Mcb Rccb Timer Two Gi Plate Earthing Sets Pits Leads And Accessories As Per Approved Design Excludes Utility Charges , Provide 12 Mm Cement Plaster In Mortar 1 4 To Columns Beams And Brick Crest Including Surface Preparation Keying Levelling And Curing For Granite Fixing. Granite Bedding Separate. , Provide 12 Mm Cement Plaster In Mortar 1 4 To Beam Soffit Including Preparation Staging Levelling And Curing As Granite Substrate With Ceiling Extra Granite Anchors To Engage Structural Concrete
Basic Detail
Tender No GEM/2026/B/8222548
Bidding Type Tender
Location
City Patna
State Bihar
Key Dates
Publish Date 30 Oct 2026
Submission Date 10 Nov 2026
Open Date 11 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
2283bb4c-3acb-4b07-9f24-43ee72690f9b.pdf
spec_2026-10-30-17-46-33_a6f5f02768a2f56559a7998c5e1ec6e4.pdf
10106443_Boq_1.xlsx

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 30, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
pdf

2283bb4c-3acb-4b07-9f24-43ee72690f9b.pdf

pdf

spec_2026-10-30-17-46-33_a6f5f02768a2f56559a7998c5e1ec6e4.pdf

xlsx

10106443_Boq_1.xlsx

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender