Tender For Construction Of New Store Shed With Gi Sheet Roofing For Stocking Materilas At Gcc-1 / Ambattur Store / Ambattur.
Tender Value
33.50 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
12 days left
EMD
33500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Store Shed With Gi Sheet Roofing For Stocking Materilas At Gcc-1 / Ambattur Store / Ambattur.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation soil and depositing on bank with initial lead of 10m to 100m and lift of 3m in Hard gravelly soil, stiff clay, block cotton,gravel, stoney earth and earth mixed with small size boulder etc., complete including cost of all materials lead lift etc complete as directed by the department engineer at site. |
| 2 | Supplying and filling with Sand for foundation layer not more than 15cm thick including cost of labour, transport, consolidation, lead and lift etc., complete as per standerd specification and as directed by the department at site. |
| 3 | Providing and laying Plain Cement Concrete 1:3:6 using 20 mm HBG stone including cost of all materials, labour, transport, curing, lead, lift etc. complete as per standard specification and as directed by the dept. Engineer at site. |
| 4 | R:C:C 1:1.5:3 using 12 to 20mm HBG metal for Raft including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. |
| 5 | R:C:C 1:1.5:3 using 12 to 20mm HBG metal for Column including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. |
| 6 | R:C:C 1:1.5:3 using 12 to 20mm HBG metal for Grade & plinth beam including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. |
| 7 | Providing steel reinforcement for all RCC works including cost of all materilas steel, binding wire, labour, lead, lift, cutting, bending, typing and binding and placing in position etc., complete as directed by the department engineer at site. |
| 8 | Brick work in C M 1:5 using good quality secound class chamber burnt bricks ( 9\\" x 4 3/8\\" x 2 3/4 \\") including cost of all materials labour, lead & lift etc., complete as directed by the department at site. |
| 9 | Plastering in CM 1:3 12 mm thick including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site . |
| 10 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt and including necessary plaster of paris putty, wherever required etc., including cost of all materials, lead, lift, labour, etc., complete complying with standard specification and as directed by the dept. Engineer at site. |
| 11 | Supplying and fabrication and fixing in position of anodised aluminium natural colour matt finish sliding window of size 1.18x1.48 m in two track in all floors with following sizes. All the two shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section of outer frames as shown below with necessary accessories such as rubber beading , handle,fixing 4mm thick clear sheet glass including all required for fabrication etc. complete. The Al. surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI 1868/1962 specification for an average anodic film thickness of not less than 15 microns. ( All materials should be got approved by the Executive Engineer) before fixing in position. |
| 12 | Supplying and Providing RS Joist for column top including cost of all materials, labour, lead,lift complete etc.,as per standard specification as directed by the dept. Engineer at site. |
| 13 | Supply, fabrication, sand blasting & galvanising of (125 x 65 /100x50) and MS angle, MS Channels various size including the cost of all materials, transport,labour,lead, lift etc., complete as per IS Specification and as directed by the dept.engineer at site. |
| 14 | Painting new iron works with two coats synthetic enamel paint over one coat of primer including coat of all materials, scoffolding, labour with all lead, lift etc., complete as per standard specification and as directed and approved by the dept engineer at site. |
| 15 | Supplying and fixing of rolling shutter using 18 swg Tata steel MS sheet with gear operation including locking arrangements on both sides , top hood, guides,gear arrangements ,2Nos godrej navtal locks seven lever, handles, applying metel primer one coat etc.complete as per standard specification. |
| 16 | Supplying & fixing in position 0.5mm TCT of Galvalume Polyester coated Roofing /cladding. The exterior face is bare galvalume with coating of 150 gm/sqm with polystar coated with not less than 25 micron factory applied coat and interior face is bare galvalume with coating of 150 gm/sqm with polystar coated not less than 25 micron factory applied coat. G.I PVC coated self tapping fasteners cutting, drilling, sealing of bolts holes and joints with sealants, mastic sealants tape, plastic coaps and filling of gaps open to atmosphere with fire resistant PU foam to suit the profile etc. complete. |
| 17 | Supplying and Providing open wiring to the light points, Fan points, etc., with approved quality 2 x 2.5 sq.mm PVC unsheathed SC copper cable of 650v grade along with 1.0 sq.mm PVC unsheathed SC copper cable for earthing inside the suitable PVC rigid pipe with necessary bends, tees, junction box, ceiling house, houlders, etc, 5 Amps. single pole switch of approved quality fixing in a 3 mm thick hylum sheet cover with T.W. switch box of suitable size, etc, including cost of all materials, lead, lift, labour, etc., complete as directed by the Engineer at site and jointing properly and making required holes in masonry or concrete and restoring the dismantled surface to original condition complete in all aspects. |
| 18 | Supplying and fixing of 20W 4 Feet LED Fitting of approved quality fixing in the existing wall with all connection properly including cost of all materials, lead, lift, labour, testing, etc., complete as per IS Specification and as directed by the dept.engineer at site. |
| 19 | Supply and fixing of 1200 mm sweep (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 1metre down rod including fan clamp with side plates and cross arm of size 450 mm. including the cost of all materials, labour, transport, lead, lift etc. as per standard specification and as directed by the department engineer at site. (SD 106) |
| 20 | Supplying and fixing of 100 Watts street light with fittings in the newly erected light post as per the approved quality including cost all materials, lead, lift, labour, transporting, fixing in position, etc., complete as per IS Specification and as directed by the dept.engineer at site. |
| 21 | GST for bidders within TamilNadu |
| 22 | GST for bidders outside TamilNadu (IGST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender