Tender For Special Repairs To Damaged Wall Tiles, Flooring, Toilet Fittings And Other Repair Works In Dro Chamber, Damaged Door, Window Screen, Wall Panel In Mini Conference Hall At 4Th Floor, Barricades In Portico, Entrance Gate Of Singaravelar Mali
Tender Value
9.78 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
6 days left
EMD
9789
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Damaged Wall Tiles, Flooring, Toilet Fittings And Other Repair Works In Dro Chamber, Damaged Door, Window Screen, Wall Panel In Mini Conference Hall At 4Th Floor, Barricades In Portico, Entrance Gate Of Singaravelar Maligai, Rajaji Salai, Chennai-01.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/ Cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officer. |
| 2 | Reconstruction of Brick work in 1:5 Cement Mortar using best quality Burnt Clay Brick of size 9\\" x 4 3/8\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for fourth floor including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 3 | Replastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Replastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Relaying the flooring with ceramic tiles of Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 6 | Dadooing walls with printed design colour glazed tiles of size 300 x 600 x 10mm best approved quality, conforming to IS 15622 in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 7 | Renewing and relaying wooden flooring (universal make) at site 8mm thick using click laminated floor with inbuilt 3mm sound bloc. Class of use 31 water resistant A.C 3 grade impact resistant IC3 [as per EN 130 900 / 1400] having 0.60mm MLC (Multi layer Composite) high pressure laminated surface treated with alu, oxide surface guard + SRSG 2 (Scrach resistant surface second generation) on top of moisture high density fibre board substrate specially developed corp of plank size 1288mmx196mmx8mm have proloc joints tongue and groove to secure long loasting joint. The tongue and groove having the edges duty pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density 850 kg/m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading unloading transportation etc., complete. |
| 8 | Renewing and refixing High density fibre board with laminated beading 25 x 12 mm on corners of dias, steps, handrail, etc., The colour and quality to be match with wooden flooring fixed using headless nails, screws, fevicol, etc., The rate inclusive labour charges, loading & unloading, transportation, etc., complete as directed by the departmental officers. |
| 9 | Renewing and refixing 8mm thick high density fibre board profile 50 mm width with a density of 850 kg / M3 having a click system tongue and groove joint to secure a long lasting joint. The rate is inclusive of cost of materials, labours involved conveyance charges etc complete complying with standard specification. |
| 10 | Renewing and refixing in position white glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 11 | Renewing and refixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 12 | Renewing and refixing approved best quality ss towel ring with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 13 | Renewing and refixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 14 | Renewingand refixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 15 | Renewing and refixing of following special quality toilet fittings of approved make conforming to IS specification and quality make including cost and supplying etc., complete as directed by the departmental officers. |
| 16 | Angle cock tap |
| 17 | Two Way Bib Cock with Health Faucet |
| 18 | Renewing and refixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 19 | Renewing and refixing in position of WPC flush door with outer frame arrangement with following specification. The door outer frame made up of best quality WPC outer frame 75x50mm using necessary holdfast to fixing the wall etc. The shutter is made up of new one of 28mm thick WPC shutter both sides fixed with 1mm thick first quality of mica sheet using fevicol/SR paste. The rate is inclusive cost of all materials, Brass butt hinges 125 x 30 mm - 3 Nos, Brass tower bolt 200x x 12mm - 1 No, Mortice lock with handle - 1 No, Brass 200 mm D type handle - 2 no labour charges for fixing the frames and shutter to the frames and necessary furniture fittings etc., complete complying with std. specification and as directed by the departmental officers. |
| 20 | Renewing the damaged door with alu, anodized powder coated finish partly glazed, partly P.L.B., door with outer frame using alu, box section and of size 63.50mmx38.10mmx1.28mm,1.41mm @ 0.818kg/m, shutter frame at bottom using alu, box section of size 95.25mmx44.45mmx1.70mm @ 1.301kg/m, at top using alu, box section of size 47.62mm x 44.45mmx1.74mm @ 0.881kg/m, at vertical [lock rail] using 47.62mm x44.45mm x 1.52mm @ 0.881kg/m at vertical plain using 47.62mmx44.45mmx1.74mm @ 0.881kg/m, and bottom panel with necessary accessories such as rubber beading, aluminium clips of size 19mmx17.30mmx0.90mm @ 0.124kg/m, 'L' angle, door stopper handle, mortice lock, 150mm tower bolt, 125mm hinges, screws, PVC woolen felt etc, complete the rate inclusive of labour and power consumption charges required for fabrication if necessary clipping, dismantling the masonry RCC beams columns, wherever necessary with power drill to the original conditions after fixing etc, complete the aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness for all sections all the materials should be got approved by the EE before fixing inposition etc, complete. |
| 21 | Renewing and refixing solid core flush shutter of following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) also provided with superior quality 1mm thick laminated sheet with more grains fixed using fevicol, headless nails, etc., including cost of wind appliances and furniture fittings such as 3 NOS of Brass Butt Hinges of size (125mm x 30mm), 1 NOS 300x12mm Brass.tower bolt, 1 No. 200x12 Brass.tower bolt, 1 NO Mortice Lock with night latch, 2NOS. Brass.200 mm 'D' type handle and door stopper with bush etc., complete complying with standard specification and as directed bythe departmental officers. Door Shutter Type: Single leaf |
| 22 | Renewing and Refixing mount track type fabric screen window top to floor level consisting of heavy duty extruded aluminum powder coated curtain track with suitable runners, gliders, end stoppers and ceiling brackets. The screen shall be made of premium quality polyster fabric of approved colour and pattern, stitched with double fold hems and suitable heading tape/hooks to obtain uniform pleats, fixed in position as directed by the departmental officer (the design and quality should be got approved by the departmental officers before use). |
| 23 | Renewing and refixing a polished brass Tamil Nadu state emblem of approved design and 15\\" size. The Logo has been chemically etched/CNC engraved, finished with mirror polishing, coloured enamel filling, concealed fixing arrangement with all necessary accessories, fixed in position as directed by the departmental officer (the design and quality should be got approved by the departmental officers before use). |
| 24 | Renewing and refixing of imported 3D english brass letters of size 10\\" superior quality and fabricated construction finish. The are made up of brass material and fixed to wall using hilti anchor bolt including grout with necessary nuts and screws, drilling holes in the walls and making dismantled portion to original condition wherever necessary etc., The rate includes cost of stainless steel, hire charges for machineries , labour charges for lifting,fixing in position, transportation charges and other necessary materials etc., complete complying with standard specification and as directed by the departmental officer (the design and quality should be got approved by the departmental officers before use). |
| 25 | Renewing the damaged partition with new one of Fully Calcium silicate HILUX Board wall panel using alu box section and aluminium frame at an interval of 0.60m at the aluminium frame of size [email protected]/m with necessary 'L' Angles, screws, nails and fixed in the wall using drilling machine with neat straight alignments etc., after finishing the frame work and fixed on one side 10mm thick HILUX BOARD approved quality and ISI make with necessary screws nails, fevicol and necessary grooves as per instruction of the departmental officers. The panelling outer side should be finished with best wall putty and painting two coats of plastic emulsion paint over one coat of primer including preparation of surface etc. and finally cleaning the partition and neatly fixing in the position etc. The rate is inclusive of cost of materials, labour charges aluminium frame work and partition work, transporting charges etc., complete as directed by the departmental officers |
| 26 | Renewing and Refixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 27 | Renewing and Refixing solid core flush shutter of following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) also provided with superior quality 4mm thick OST sheet with more grains fixed using fevicol, headless nails, etc., including cost of wind appliances and furniture fittings such as 6 Nos Brass Hinges of size (125mmx30mm),2 No. 200x12mm Brass tower bolts, 1No Brass 300mm aldrop, 2 Nos.150mm Brasss Oranamental handle,2 Nos 250mm Brasss Oranamental handle, Door closer and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - .Door Shutter Type : Double leaf Thickness:30/35mm |
| 28 | Renewing the damaged wall panelling with new one of Fluted design wall panelling using best superior quality WPC fluted design panel of 12mm thick approved quality and ISI make with necessary screws nails, fevicol and necessary grooves as per instruction of the departmental officers and also cutting the partition for Electrical Switch box and AC Plug Box and telephone Box requirements and finally cleaning the wall panelling with neat position etc. The rate is inclusive of cost of materials, labour charges for fixing, transporting charges etc., complete as directed by the departmental officers. (The materials quality and colours are approved by the departmental Engineer before use of works) |
| 29 | Renewing the damaged Barricade with following Size 3.10mx1.07m.The Horizontal top, bottom and Vertical Intermediate and Corner size of M.S. Hollow box section of Size 25.4mmx25.4mmx2.65mm Connecting it inbetween two Vertical corners including cutting to required size, grinding and welding charges and fixing the frame work and Placing the intermediate verticals (16 Nos) In between the barricade with uniform spacing as directed by the department officers. the rate includes the cost of materials, labour charges, conveyance charges, welding charges, hire charges for welding machine and fixing into the original alignment rigidly with the structure if necessary and redoing the same to its orginal condition and painting with two coat of SEP and priming coat etc complete |
| 30 | Renewing and refixing following Structural elements for Mild steel Base plate arrangements. The rate is inclusive cost of all materials, labour for wrought and putup, Screws, anger bolt, welding charges, scaffolding charges and transportation etc complete complying with standard specification and as directed by the departmental officers. |
| 31 | Revarnishing Woodwork two Coats of approved quality in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality of paint should be got approved by the Executive Engineer before use on works.) |
| 32 | Repainting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 33 | Repainting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 34 | Collecting the scattered debris from the campus and conveying away the same to outside by lorry to a lead of 6KM including loading charges and dumping in low places and levelling etc., complete. |
| 35 | GST at 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender