Tender For Comprehensive Maintenance Of Dad Colony And Lao Office At Bg Line At Mil Station Jamnagar Under Ge(A) Jamnagar
Tender Value
4 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
21 days left
EMD
8000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of Dad Colony And Lao Office At Bg Line At Mil Station Jamnagar Under Ge(A) Jamnagar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick, stone or concrete surface including racking out joints hacking for key scrubbing down with water to receive plaster etc complete all a specified. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm of any description each, complete all as specified and directed by Engineer in charge. |
| 3 | M & L for rendering 10mm thick in CM (1:6) on surfaces of brick work/ stone masonry /concrete surface of wall, finished even and smooth without using extra cement completeall all as specified and as directed by Engineer-in-charge. |
| 4 | M&L for Preparation of newly plaster surfaces of wall by hand held sander/ long handle sander including cornices, pilasters etc completed all as specified directed and applying two coat of oil bound distemper over a coat of alkali resistant priming paint with roller finish complete all as specified and as directed by Engineer-In-Charge. |
| 5 | M&L for peparation of old surface of wall removing nails including scraping down smoke soot, moulds, moss and effloresent salts and trading oil and greasy spots etc by hand held sander/ long handle sander including cornices, pilasters etc (plastered or unplastered surfaces), holes with putty and applying one coat of oil bound distemper complete all as specified and as directed by Engineer-in-charge. |
| 6 | M & L for rendering 5mm thick in CM (1:3) on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 7 | M&L for Preparation of newly plaster surfaces of ceiling by hand held sander / long handle sander including cornices, pilasters etc completed all as specified directed and applying three coat of white washing with roller finish complete all as specified and as directed by Engineer-In-Charge. |
| 8 | M&L for peparation of old surface of ceiling by hand held sander/ long handle sander including cornices, pilasters etc and applying one coat of white wash complete all as specified and as directed by Engineer-in-charge. |
| 9 | M & L for rendering 15mm thick in CM (1:4) on fair faces of stone masonry/brick/concrete surfaces of wall, finished even and fair without using extra cement complete all as specified and as directed by Engineer -in-charge. |
| 10 | M&L Preparation of newly plastered surface of wall by hand held sander/ long handle snader including cornices, pilasters etc and applying with airless spray two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete as specified and as directed by Engineer in charge. |
| 11 | M&L for Preparing of old surfaces of wall by complete removal of existing treatment, scraping down, washing, rubbing down and stopping of painted surface of walls & ceiling including roof projection / chajjas and by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on Two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9lit/10 sqm complete all as specified and as directed Engineer in charge. |
| 12 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directd by Engineer-in-charge. |
| 13 | M&L for peparation of old surface of wall by hand held sander/ long handle sander including cornices, pilasters etc and applying one coats of cement base paint complete all as specified and directed by Engineer-in-charge. |
| 14 | M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed Engineer in charge. |
| 15 | S&F Powder coated anodised aluminium frame for doors, windows, ventilators with on or more rebets including jointing cleat for fixing etc. complete all as specified and directed by Engineer -in-charge. |
| 16 | S&F Powder coated aluminium doors shutter,alumunium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges , anodised aluminium snap beading screws etc. complete as specified and directed by Engineer-in-charge. |
| 17 | M&L for 12mm thick Prelaminated particle board, interior grade one, prelaminated both sides with decorative choice lamintions, fixed with door shutter etc.complete all as specified and directed by Engineer-in-charge. |
| 18 | S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden beads, area exceeding 0.50 sqm and not exceeding 1.0 sqm each pane with and including solar control film 25 micron reflective type (greater sun control or equivalent) complete as specified and directed by Engineer-in-charge. |
| 19 | Hacking out old broken glass (any thickness, size, any description) from wooden/metal frames, incl glazing pins and beadings all as specified and as directed by Engineer-In-Charge. |
| 20 | S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each pane all as specified and directed by Engineer-In-Charge. |
| 21 | S&F 5.5mm thick sheet glass, ordinary quality and glazing with oil putty or with wooden beads, area exceeding 0.50 sqm and not exceeding 1.0 sqm each pane complete as specified and directed by Engineer-in-charge. |
| 22 | S&F floor door stopper of aluminium alloy body and tongue, anodised 140mm length with hard drawn steel sping, fixed in floor complete as specified and directed by Engineer-in-charge. |
| 23 | S & F PVC door with chowkhats frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing. |
| 24 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete, all as specified & directed. make - rajshree or equivalent as specified |
| 25 | S&F stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in any type of windows/doors complete all as specified and directed by Engineer-in-charge. |
| 26 | S&F100mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,type B- 21 complete all as specified and directed by Engineer-in-charge.(Make: Crown/Ajanta/Jayant or equvalent as specified ) |
| 27 | S&F Aluminium anodised barrel tower bolts, 100 mm long, of extruded section complete as specified and as directed by Engineer-in-charge. (Make: Crown/Ajanta/Jayant or equvalent) |
| 28 | S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised.complete as specified and as directed by Engineer-in-charge. (Make: Crown/Ajanta/Jayant or equvalent) |
| 29 | S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed by Engineer-in-charge..(Make: Crown/Ajanta/Jayant or equvalent) |
| 30 | M & L for rendering 10mm thick plaster in CM (1:3) on surfaces of brick work/ stone masonry /concrete surface to receive tile without using extra cement completeall as specified and as directed by Engineer-in-charge. |
| 31 | M&L Glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete as specified and as directed by Engineer-in-charge. |
| 32 | M & L Non skid coloured ceramic tiles 7-8mm thick area of each tiles exceeding .06 Sqm but not exceeding .11 Sqm, in floors etc. set and jointed in neat cement slurry mixed with water proofing liquid compound and pointed in white or coloured grouting chemical to match, over 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-charge. |
| 33 | Taking down 25 mm or 32mm bore steel water tubing and connection from wall and floor complete all as per directed including cleaning for refixing or removal from site as in repairs. |
| 34 | Taking down 20mm bore steel water tubing and connection from wall and floor complete all as per directed including cleaning for refixing or removal from site as in repairs. |
| 35 | Taking down 15 mm bore steel water tubing and connection from wall and floor complete all as per directed including cleaning for refixing or removal from site as in repairs. |
| 36 | S & F of 25mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fitings, connected joint with CPVC adhesive taflon tape in any requirment complete to walls and ceilings or laid in floorss including all connected brass CPVC fitting sand cutting grooves filled with CM (1:6) complete as specified and as directed by Engineer-in-charge. |
| 37 | S & F of 20mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fitings, connected joint with CPVC adhesive taflon tape in any requirment complete to walls and ceilings or laid in floorss including all connected brass CPVC fitting sand cutting grooves filled with CM (1:6) complete as specified and as directed by Engineer-in-charge. |
| 38 | S & F of 16mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fitings, connected joint with CPVC adhesive taflon tape in any requirment complete to walls and ceilings or laid in floors including all connected brass CPVC fitting sand cutting grooves filled with CM (1:6) complete as specified and as directed by Engineer-in-charge. |
| 39 | Dismantling exc 250 and n exc 500 ltr water tank and removing from site to store complete as specified and as directed by Engineer-in-charge. |
| 40 | S&F 500ltr capacity HDPE three layer rotational moulded polyethylene water storage tanks with UV resistance, advanced storage solutions featuring distinct layers for durability, temperature control and hygiene (cylindrical vertical with closed top) hoisted and fixed in position with 20mm ball/float valve complete all as specified. |
| 41 | S & F of 25mm outer dia Ball valve, fitings to 25mm dia CPVC pipes SDR 11, connected joint with CPVC adhesive taflon tape complete as specified and as directed by Engineer-in-charge. |
| 42 | S&F in repairs bib taps cast copper alloy chromium plated, fancy type, long body, concealed type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore complete all as specified and directed by Engineer-in-charge. . |
| 43 | S&F in repairs stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge. |
| 44 | S & F in repair 15mm fancy type pillar taps, cast copper alloy, with long heads, chromium plated , screwed down high pressure, with or without lettered 'Hot or Cold ' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed cop complete as specified and as directed by Engineer-in-charge. |
| 45 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed by Engineer-in-charge. |
| 46 | S&F in repair Brass chromium plated Tublar towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed by Engineer-in-charge. |
| 47 | S&F in repairs glass corner shelf 300 mm (with ABS Bracket 300x 600) as selected including removing existing shelf ,specified and directed by Eng-in-charge. |
| 48 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated braket guard and railing 60cm long complete all as sprcified |
| 49 | S&F in repairs 600mm long PVC connection tubes 15mm Size with brass nuts. as selected,specified and directed by Eng-in-charge. |
| 50 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including fixing to flushing cistern and flush pipe and plastic water closet seat cover black clodsed pattern with flat bottom and cover and mild steel hinging device. complete as specified and as directed by Engineer-in -charge. |
| 51 | S&F 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and directed by Engineer-in-charge. |
| 52 | S&F Stainless steel Kitchen plate racks 1mm thick over all size 24\\" x30\\" x10\\".complete all as specified and directed by Engineer-in-charge. |
| 53 | S&F in repair Vitreous china wash basin, white , flat back , size 550 x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed, including waste coupling of PTMT 32mm dia (half or full threaded). (Minimum weight 45gms, washer and brass chromium plated bottle traps for wash with inlet and outlet screws for pope or connections including mecessary packing , union and cap and fixed complete all as specified and directed by Engineer-in-charge.. |
| 54 | S& F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm bowl size 410mm x 330mm x 160mm complete including removing existing sink complete all as specified and directed by Engineer-in-charge. |
| 55 | Supply and fix in repair 75 mm bore PVC (SWR) plain floor trap with CP grating complete all as specified and directed by the Engr-in-Charge. |
| 56 | S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-charge. |
| 57 | S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge. |
| 58 | S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-charge. |
| 59 | S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge. |
| 60 | S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engineer-in-charge. |
| 61 | S&F 110mm PVC (SWR) branch piece, single (double Y) equal or unequal complete all as specified and directed by Engineer-in-charge. |
| 62 | S&F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engineer-in-charge. |
| 63 | S&F in repairs PVC(SWR) bend any radius,110 mm dia.provided with access door complete all as specified and directed by Engineer-in-charge. |
| 64 | S&F in repairs PVC(SWR) bend any radius,75 mm dia.provided with access door complete all as specified and directed by Engineer-in-charge. |
| 65 | S&F in repairs 25mm SS curtain rail, cut in required length and size to fit with opening incl fixing on bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement complete all specified and as directed by Engineer-in-charge. |
| 66 | S&F in repairs curtain rod side brackets of stainless steel, angular, or cantilever type fixed to wall with 02 Nos screws on each bracket and fitted screws for fixinng curtain rod incl CP/stainless steel carved decorative design plain metal colour nobs with fixing arrangement for curtain rod using a screw complete all as approved and shown by Engr-in-charge. |
| 67 | M&L for racking of cracks upto 5 mm wide ,preparation and crack filling with ready to use crack fiber reinforced filler /chemical based crack fillers by approved manufacturer and filling as per manufacturer instructions in walls,roofs of any type or size complete all as specified and directed by Engineer-in-charge. (Make: Pidilite/dr fixit,fosroc, or equivalent) |
| 68 | Removing the plant/growth of any description size, any location of external surfaces of walls shafts by cutting & remvoing the roots completely spraying the suitable chemical (each plant 100 ML) in the removed portion to avoid re-growth & making good damaged portion to match the existing surfaces by PCC type B0 (1:2:4) 12.5 mm graded aggregate complete all as directed by Engr In Charge (Chemical :- Gramzone/Roundup or equavalent suitable chemical to remove/destroy the plants/roots) |
| 69 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth on brick walls complete all as specified and directed. |
| 70 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 71 | S&F in repairs 2 in 1 wall maounted mixer (15 mm bore) with quater turn fittings and provision for overhead shower with 115 mm bend pipe and wall flange, cast copper alloy with capstan heads, fancy type chromium plated (robotic electroplating for everlasting lustrous shine) with 2 water volume adjustment knobs one both side to control the flow of temperature ,screwed down, screwed for iron pipe or for brass ferrule and fixed includng neccesary fittings complete for mixing hot and cold water for tap and shower all as specified and directed by Engr-in-charge. Make:- Hindware ,Cera model or equivalent |
| 72 | Demolition of cement concrete (un-reinforced) in any position not otherwise specifically provided complete all as specified and as directed. |
| 73 | M&L for 40 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate mixed with liquid water proofing compound @ 3% of cement in bottom of sunken floors.Note: water proofing comound will be paid saperatly. |
| 74 | Supply only of integral water proofing compound as per manufactures instruction complete as specified and as directed by Engineer-in-charge. |
| 75 | M&L Cleaning vertical and horizontal surfaces of sunken slab using wire brushing followed by sanding with emery paper for loose materials/dust and applying two coats of epoxy resin component (Dr. Fixit DAMPGUARD or equivalent) solution/mix using nylon brush pouring Base part in appropriate container followed by the Hardner part and mix thoroughly to attain homogeneous smooth paste and dilute the mixed compound with water in ratio 1 part Base: 1 part Hardner: 1 part water by slow addition and mix thoroughly until a brushable consistency is obtained, first coat will be allowed to dry for 6 to 8 hrs before application of second/final coat) incl curing treated surface for 24 hrs complete incl applying evenly a coat of blown bitumen @ 1.5kg/sqm over entire treated surfaces incl spout holes complete and all as specified as per manufacturer instruction. |
| 76 | M&L 15mm thick rendering in cement plaster 1:3 with WPC on bottom and side walls of sunken floor incl finished even and smooth w/o using extra cement complete as specified and as directed by Engineer-in-charge. |
| 77 | M&L for filling PCC type E-2 1:5:10 (40 mm graded stone aggr) as in sunken floor after applying appropriate treatment to side walls complete as specified and as directed by Engineer-in-charge. |
| 78 | S&F in repair 600 X 450 mm bevelled edge miror of selected guality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washer complete as specified and as directed by Engineer-in-charge. |
| 79 | Refixing of shutters of any description exc 1.0 Sqm but n exc 2.0 Sqm to same opening with necessary welding/ scres as per site requirment complete as specified and as directed by Engineer-in-charge. |
| 80 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 81 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 82 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 83 | Taking down ceiling fan/ Exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Jamnagar complete all as specified and as directed. |
| 84 | M & L for Point wiring for one light point controlled by one, one way switch 5 Amps using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed |
| 85 | Description all as per item No 84 above but for One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator complete all as specified and directed by Engr-in-Charge. |
| 86 | Description all as per item No 84 here in before but using One light point controlled by one, two way switch 5 Amps complete all as specified and directed by Engr in charge. |
| 87 | Description all as per item No 84 here in before but using One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed by Engr in charge. |
| 88 | Description all as per item No 84 here in before but using One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad complete all as specified and directed by Engr in charge. |
| 89 | Description all as per item No 84 here in before but using OneOne bell point controlled by one, bell switch 5 Amps complete all as specified and directed by Engr in charge. |
| 90 | Description all as per item No 84 here in before but using One using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed by Engr in charge. (power point) |
| 91 | S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed by Engr in charge. |
| 92 | S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed by Engr in charge. |
| 93 | S & F for modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed by Engr in charge. |
| 94 | S & F for modular switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and directed by Engr in charge. |
| 95 | S & F for modular switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified and directed by Engr in charge. |
| 96 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed by Engr in charge.. |
| 97 | S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and directed by Engr in charge. |
| 98 | S & F for Bell push modular 6 Amps single module complete all as specified and directed by Engr in charge. |
| 99 | S & F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed by Engr in charge.. |
| 100 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and directed by Engr in charge. |
| 101 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed by Engr in charge. |
| 102 | S & F for MCB Single pole and neutral rated capacity 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed by Engr in charge. |
| 103 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curvecomplete all as specified and directed by Engr in charge. |
| 104 | M & L for rewinding of ceiling fan of any size with super enameled copper wire of existing gauge including varnishing and drying complete reassenbling & testing complete of size 1200 mm sweep complete all as complete all as specified and directed by Engr in charge. |
| 105 | S & F for ceiling fan, 230 Volts, 1200 mm sweep with mian air delivary 210 CFM, service value of the fan shall be greater than 6.1 (5 star rated) as per BIS with blades, down rod & other necessary accessories with brushless direct current motor (BLDC) with out remote system and electrical connections from ceiling rose to fan teriminal complete all as specified and as directed(new provision) |
| 106 | S & F for LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed by Engr in charge. |
| 107 | Supply and fix starting capacitor 2.5 MFD complete all as specified and directed by Engr in charge. |
| 108 | Servicing only Split type air conditioner in citu (Split type air conditioner comprises with out door and indoor unit complete) of capacity 1.5/2.0 TR of any make and any type by replacing unserviceable parts from the machine including charging of Refrigerant gas after vacuuming and leak testing. Brazing the suction/ discharge tubes where required and cleaning of cooling coil and condenser coil, oiling, greasing of blower motor, checking of electrical circuit and replacement of defective electric blower fan motor, over load protector, relay, capacitor etc to achive proper cooling effect and also checking of electronic circuit of machine and repair where necessory by replacing electronic parts and changing of wirings with proper size PVC insulated wires as directed and testing commissioning complete all as specified and directed by Engr in charge. |
| 109 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 110 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 111 | S & F for energy efficient exhaust fan of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed by Engr in charge.. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender