Tender For Addn/Altn To Bldg No P-43 (Sports Complex) At Coast Guard Under Ge Haddo, Sri Vijaya Puram
Tender Value
43.30 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
19 days left
EMD
86600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn To Bldg No P-43 (Sports Complex) At Coast Guard Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each all as specified and directed. |
| 2 | Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each all as specified and directed. |
| 3 | Demolition of (unreinforced) cement concerete in ground floors and paving not exceeding 15 cm thickness (below or above GL) etc, complete all as specified and as directed. |
| 4 | M&L for providing PCC 1:3:6 type C2 (using 40mm graded stone agg) as in plinth protection 75 mm thick finished over and smooth without using extra cement etc all as specified and directed. |
| 5 | M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate as in 75mm thick as in sub base complete all as specified & directed by Engineer-in-Charge. |
| 6 | M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base for floors all as specified and directed. |
| 7 | M&L for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases etc, including demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as specified and directed. |
| 8 | M&L PCC 1:2:4 type B2 (40mm grade stone agg) as in cement concrete in surface channel and drain, including demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as specified and directed. |
| 9 | Material and labour for providing Plain Cement Concrete (1:2:4) type B1 using 20 mm graded aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones etc water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work, including demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as specified and directed. |
| 10 | M&L for pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6, including demolition of brickwork or stone / boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc, complete all as specified and directed. |
| 11 | M&L for fly ash modular block masonry, straight or curved on plan exceeding 6 m mean radius, built in cement mortar (1:6), including wetting of blocks, laying in proper bond, raking out joints for pointing or plastering, forming quoins, jambs, junctions and all necessary cutting and fitting of blocks, scaffolding, curing and all other incidental works, complete all as specified and as directed by the Engineer-in-Charge. |
| 12 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | Supply and fix for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 14 | Supply and fixing stainless steel (SS-304 grade) hinges 100x62x2.5 mm of approved quality, with necessary stainless steel screws etc, complete all as specified and directed. |
| 15 | Supply and fix as in repairs 200 mm long of Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 16 | Supply and fix as in repairs 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and directed. |
| 17 | S & F for as in repairs Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 300 mm etc complete all as specified and directed. |
| 18 | S& fixed in repairs for Aluminium (die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 19 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 20 | S&F for Powder coated Aluminium grill (minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in charge. |
| 21 | M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to timber or Aluminium frame work etc all as specified and directed. |
| 22 | Supply only plain sheet glass 4.0 mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 23 | Supply only figured glass, pin head type sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter not exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 24 | Supply only Aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples or beading etc complete all as specified and directed. |
| 25 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed |
| 26 | Dismantling structural steel work of any description complete all as specified. |
| 27 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including or similar pattern roof coverings etc, complete all as specified and as directed. |
| 28 | S&F for pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as specified. |
| 29 | Dismantling of ceiling boards including grid of any description fixed in any position with nails or screws etc all as specified and as directed. |
| 30 | S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections aluminium sections main tee 36.5X25X1.4mm, cross 23.5X26.4X1.4mm, angle 25X25x1.4mm including cutting, drilling jointing etc complete including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 4mm thick E-boards (Classic) 605mm x 605mm size Specified by Engr-in-charge and making good etc complete all as specified and as directed. |
| 31 | Dismantling boarding, shelves, partitions of any description, fixed in any position with nails, screws, clamps, etc all as specified and directed. |
| 32 | S&F Yonex make Badminton Court PVC Mat, Model AC 364, of overall size 15.4 m × 7.1 m and thickness 4.5 mm, supplied in rolls of 1.42 m width and 15.4 m length, weighing approximately 65 kg per roll, suitable for indoor badminton court use. The item shall include thorough cleaning and preparation of the existing subfloor to ensure a clean, dry, smooth, level and sound surface; transporting, handling and unrolling the mat; accurate setting out, alignment and positioning of the mat strips; cutting and trimming to the required dimensions and shape; joining of adjoining strips with suitable approved jointing tape to form firm, straight and flush joints; proper bonding, wherever recommended by the manufacturer; removal of wrinkles, air pockets and surface undulations; finishing of all edges and periphery; and ensuring a uniform, stable and slip-resistant playing surface suitable for badminton. The work shall include all necessary jointing tapes, adhesives, accessories, tools, tackles, labour, handling, wastage and incidental operations required for complete installation, in accordance with the manufacturer's recommendations and applicable BWF requirements, complete all as specified and as directed by the Engineer-in-Charge. |
| 33 | S&F Yonex make PVC Badminton Court Mat, Model AC 364, 4.5 mm thick, weighing approximately 65 kg per roll, suitable for indoor badminton court use and conforming to applicable Badminton World Federation (BWF) requirements, including transporting, handling, unrolling, laying, aligning and positioning of mat rolls over the prepared subfloor; cutting and trimming to the required dimensions; joining adjoining strips with approved jointing tape to ensure firm, straight and flush joints; proper securing of joints and edges; removal of wrinkles, air pockets and undulations; finishing along the periphery and ensuring a uniform, smooth, stable and slip-resistant playing surface. The item shall include all necessary jointing tape, adhesives wherever recommended by the manufacturer, labour, tools, tackles, accessories, wastage and incidental operations required for complete installation, all in accordance with the manufacturer's recommendations and as specified and directed by the Engineer-in-Charge. |
| 34 | S&F Badminton court posts with stands and net, of approved make, design and specifications, suitable for indoor badminton court, comprising a pair of rigid and sturdy posts of suitable material, complete with stable base stands, provisions for proper tensioning and adjustment of the net, tensioning cord, hooks, clamps, fittings and all necessary accessories. The item shall include supply, transportation, handling, assembling, positioning and installation of the posts and stands at the designated locations, fixing and securing the net between the posts at the prescribed height, proper alignment and tensioning of the net to ensure a taut and uniform playing surface, adjustment of posts and stands for stability, and all necessary nuts, bolts, fasteners and incidental materials required for complete installation, all in accordance with the manufacturer's recommendations and applicable badminton court requirements, complete all as specified and as directed by the Engineer-in-Charge. |
| 35 | M&L for providing and applying 3 mm thick epoxy grout of approved make and colour for grouting the joints of existing or newly laid ceramic, vitrified or other approved tiles, including cleaning and removal of dust, dirt, loose mortar and other foreign matter from the tile joints; mixing the epoxy resin, hardener and filler components in the proportions recommended by the manufacturer; filling the joints uniformly and completely to the required depth using suitable tools; removal of excess grout from the tile surface; cleaning and finishing the joints without damaging or staining the tiles; and allowing the grout to cure for the period recommended by the manufacturer. The item shall include all materials, labour, tools, tackles, cleaning materials and incidental operations necessary for completion of the work, all as per the manufacturer's instructions, complete all as specified and as directed by the Engineer-in-Charge. |
| 36 | M& L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes etc,complete all as specified and directed. |
| 37 | S&F Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed. complete all as specified and directed. |
| 38 | S&F glazed ceramic coloured tiles (350x450 x 7mm thick ) on dado & skirting , set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed. etc, complete all as specified and directed. |
| 39 | M & L for Non-Skid heavy duty ceramic tiles of size 600 X 600 X 10mm thick, or high dimension (except thickness) of any colour any design Durastone, weather proof impact resistant, abrasion resistant exterior tiles, as in floors vertical cladding and etc , set and jointed in neat cement slurry over and pointed in white or coloured cement to match, over 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 40 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms,floor, walls and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and polishing including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 41 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed. |
| 42 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 43 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, etc all as specified and directed. |
| 44 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified. |
| 45 | M&L for Reinforced cement concrete Type B1,1:2:4 using 20mm graded stone aggregate in Slab supported on walls, as in Shelves all as specified and directed. |
| 46 | M&L for use of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thickrough finished flat concrete surfaces all as specified and directed. |
| 47 | Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified. |
| 48 | Material and labour for Mild steel TMT bars of Fe 500 or Fe 500D, 8 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified. |
| 49 | S& F for 20mm bore Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. complete to walls, ceiling or in floor, including taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 50 | Supplying and fixing of outer diameter 20 mm CPVC Brass Elbow fittings on walls/ceiling or laying in floors complete all as specified. |
| 51 | Supplying and fixing of outer diameter 20 mm CPVC Brass Tee fittings on walls/ceiling or laying in floors complete all as specified. |
| 52 | S& F for 25mm bore Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. complete to walls, including taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 53 | Supplying and fixing of outer diameter 25 mm CPVC Brass Elbow fittings on walls/ceiling or laying in floors complete all as specified. |
| 54 | Supplying and fixing of outer diameter 25 mm CPVC Male Brass Threaded Adaptor (MTA/ MBTA) fittings on walls/ceiling or laying in floors complete all as specified. |
| 55 | Supplying and fixing of outer diameter 25 mm CPVC Female Brass Threaded Adaptor (FTA/ FBTA) fittings on walls/ceiling or laying in floors complete all as specified. |
| 56 | Supplying and fixing of outer diameter 25 mm CPVC UNION fittings on walls/ceiling or laying in floors complete all as specified. |
| 57 | Supplying and fixing of outer diameter 25 mm CPVC Ball Valve fittings on walls/ceiling or laying in floors complete all as specified. |
| 58 | S&F in repairs of PVC waste pipe 31x32x850 mm long, etc complete all as specified and directed.(Make : Prayag Cat No. 3272 or Equivalent) |
| 59 | S&F in repairs PVC connection 15 mm dia and 450 mm long with both and nuts etc complete all as specified. |
| 60 | Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 61 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) etc complete all as specified and as directed. |
| 62 | S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent etc complete all as specified and as directed. |
| 63 | S&F for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent etc complete all as specified and as directed. |
| 64 | S&F for 110mm dia PVC (SWR) bends any radius etc complete all as specified and as directed. |
| 65 | S&F for 110mm dia PVC (SWR) bends with acess door any radius etc complete all as specified and as directed. |
| 66 | M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified. |
| 67 | S & F in repairs vitreous china wash down single piece WC Rimless Bowl with Cistern for Coupled WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Conversion Bend, Fixing Accessories and Accessories Set, with 'S' or 'P' trap and other connecting items approved brand including fix with white cement complete. (Make-Jaquar Cat Pt No.OPS-WHT-15753NS250UFSMZ or equivalent in Parryware/Cera/Prayag |
| 68 | S&F in repair vitreous china counter wash hand basin oval shape of size 550x400mm including brackets, 32 mm CP waste coupling, chain and plug, waste fittings all necessary inlet and out let connections complete all as specified |
| 69 | S&F in repair Vitreous China Urinal, half stall type (back or corner wall type), white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed |
| 70 | S&F in repair Toilet paper holder Make : Jaquar Code ACN-1153S or equivalent model in Parryware / Prayag / Gem |
| 71 | S&F in repair 20 mm dia brass stainless steel tubular towel rail D type 600mm long complete all as specified |
| 72 | S&F in repair chromium plated soap dish , fixed to plugs with chromium plated brass screws complete all as specified.Make : Jaquar Cat Part No AQN-CHR-1131N |
| 73 | S&F in repair bib tap, brass, 15mm dia, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed Make : Jaquar Cat Part No CON-107KN |
| 74 | S&F in repair two way bib cock, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified.Make : Jaquar Cat Part No ARI-CHR-39041 |
| 75 | S&F Brass health faucet 1.0 mtr long flexible tube with wall hook etc complete all as specified and as directed. (Make Prayag Cat Part No. BEA-106 or Equivalent approved) |
| 76 | S&F in repair 15mm dia cast copper alloy, chromium plated pillar tap long body swan neck type with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified |
| 77 | S&F in repair 15mm Stop valve angle cock cast copper alloy, fancy type, chromium plated with long shunk and cup high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified |
| 78 | S&F in repair angular stop cock, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions complete all as specified and as directed Make : Jaquar Cat Part No CON-053KN |
| 79 | S&F in repair WHB mixer, 15mm dia, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, with long shank with central hole screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed Make : Jaquar Cat Part No CON-167KNB |
| 80 | S&F in repairs looking mirror 600 x 450 mm bevelled edge of selected quality glass and fixed to wall with chromium plated brass screws and cup washers etc complete all as specified and as directed. |
| 81 | S&F in for Corner glass self assembly size 300mm with chromium plated bracket guard and railing (Make: Prayag Cat No. BEA-44 or Equivalent approved) |
| 82 | S&Fixed in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified |
| 83 | M&L for rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement, including taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc complete all as directed.Note: Water proofing compound shall be measured and paid separately. |
| 84 | Supply only integral water proofing compound all as specified and as directed. |
| 85 | M&L rendering 10mm thick in CM 1:6 on brick surfaces and finished even and smooth w/o using extra cement etc, including taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc completed all as specified and directed. |
| 86 | M&L for rendering 5mm thick in cement mortar 1:3 on fair faces of ceiling concrete surfaces finished even and smooth without using extra cement complete all as directed. |
| 87 | Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc, all as specified and directed |
| 88 | M&L for new plastered on walls and applying two coats of oil bound distemper over a preparatory coat of 1mm thickess of plaster of paris putty on plastered surface over a coat of priming plastered and other surfaces with alkali resistant priming paint, including necessary preparation of surfaces etc, completed all as specified and directed. |
| 89 | M&L preparation of new plastered ceilling surfaces and applying two coat of distemper oil emulsion over a coat primer including 1mm thickess of plaster of paris putty on plastered surface etc, complete all as specified and directed. |
| 90 | M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc with 1mm thick plaster of paris putty and applying two coats of acrylic emulsion distemper over one coat primer including filling of cracks, holes and including leveling the surface which undulation found with wall care putty etc. all as specified. |
| 91 | Material and labour for Preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying one coat of oil emulsion distemper (white/Tinted) complete all as specified and as directed. |
| 92 | M&L for preparation old plastered surface of wall and applying one coats of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over existing painted surfaces etc complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard or equivalent).Note: Rate quoted shall be deemed to include scafolding upto 12m height or as per the actual site requirements. |
| 93 | Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed. |
| 94 | Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed. |
| 95 | Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed. |
| 96 | M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLSH PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ on surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls/ floor or surface on wall/ roof duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Make of wire : Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.Note :- The unit rate quoted shall deemed to include the cost of following :-(a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 97 | All as per item Sl No.96 above, but, for One light/fan point controlled by one modular switch 6 Amps one way complete all as specified and directed. |
| 98 | All as per item Sl No.96 above, but , for one modular 3 pin 6 Amp socket out let on independent board complete all as specified and directed. |
| 99 | All as per item Sl No.96 above, but, for one modular 3 pin 6 Amps socket outlet on same Board complete all as specified and directed. |
| 100 | All as per item Srl No.96 above, but , point wiring with 4.0 sqmm PVC FRLSH insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board complete all as specified and directed. |
| 101 | S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. |
| 102 | S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed. |
| 103 | S & F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. |
| 104 | S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16 Amp , universal complete all as specified and directed. |
| 105 | S & F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete all as specified and as directed. |
| 106 | Supply & fix Modular AC Box With 20A DP MCB \\"C' Type, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top, 240 volts AC supply for air conditioner, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) Model No 98492 or equivalent to Havells/L&T |
| 107 | Supply and fix Heavy duty industrial wall mounted fan 450 mm sweep suitable for working on 230 volts 50 hz supply including taking down old unserviceable one complete all as specified and directed. |
| 108 | Supply and fix exhaust fan 450 mm sweep suitable for working on 230 volts 50 hz supply including taking down old unserviceable one complete all as specified and directed. |
| 109 | Supply and fixing LED lights fitting 1x 22W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-charge |
| 110 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge |
| 111 | S & F GI brackets of GI pipe light grade of size 32 mm dia including nuts, bolts and washers for building secufity light all as specified and directed |
| 112 | S & F 30/35 watts LED building security light fittings , pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessary fixing arrangements as per site requirements class all as specified and directed by Engr In charge. |
| 113 | Supply and fix LED flood light 200/210 watts IP 66 protection single phase 50 Hz with all accessories complete all as specified and directed by Engineer-in-charge |
| 114 | M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 25 mm wide rigid non-metallic PVC casing and capping and its accessories on surface of wall/ceiling/roof/ floor complete all as specified and as directed. |
| 115 | S & F single pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 08 ways,and making good to the distrubed surface /walls. |
| 116 | Supplying & fixing MCB SPN 32/40 Amps (`C’ series) having current rating 10 KA complete all as specified and directed . |
| 117 | Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.Note for item No 112 & 113:- All copper conductors should be connected with MCCB/ MCB alongwith copper reducer terminals of suitable size duly crimpled.” |
| 118 | M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed.NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type RCC chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. (2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. |
| 119 | NOTE: The item of BOQ shall be executed in high rise building. The contractor shall arrange necessary scaffolding/ shoring, water pressure jet pump and other safety measures to be undertaken including insurance cover for the workers engaged by him during the execution of work. The rate quoted by the contractor for the above items shall be inclusive of the above provisions . Nothing extra on this account is admissible. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender